AL sheet diamond

Ref Price:
Loading Port:
China Main Port
Payment Terms:
Min Order Qty:
Supply Capability:

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Aluminium is a relatively soft,durable, lightweight, ductile and malleablemetalwith appearance ranging from silvery to dull gray, depending on the surfaceroughness. It is nonmagnetic and does not easily ignite. A fresh film ofaluminium serves as a good reflector (approximately 92%) of visible light and an excellent reflector (asmuch as 98%) of medium and far infrared radiation. The yield strengthof pure aluminium is 7–11 MPa, while aluminium alloys have yield strengths ranging from200 MPa to 600 MPa. Aluminium has about one-third the density and stiffness of steel.It is easily machined, cast, drawn and extruded.

Aluminium alloys (or aluminum alloys; see spellingdifferences) are alloysin which aluminium(Al) is the predominant metal. The typical alloying elements are copper, magnesium,manganese,silicon,tin and zinc. There are twoprincipal classifications, namely casting alloys and wrought alloys, both of which are furthersubdivided into the categories heat-treatableand non-heat-treatable. About 85% of aluminium is used for wrought products,for example rolled plate, foils and extrusions.Cast aluminium alloys yield cost-effective products due to the low meltingpoint, although they generally have lower tensile strengthsthan wrought alloys. The most important cast aluminium alloy system is Al–Si,where the high levels of silicon (4.0–13%) contribute to give good castingcharacteristics. Aluminium alloys are widely used in engineering structures andcomponents where light weight or corrosion resistance is required


Finishing:Mill Finish, Painted, One Side Bright, Brushed and Coil Anodizing available onrequest

Alloy:  AA1050, 1060, 1100, AA3003, 3005, 3015, 5052, 5754,5083,8011, etc

Temper:H14/16/18/22/24/32,HO etc.

Thickness: 0.2mm—100mm

Width: 100mm—2300mm(Can be slitted)

Standard:GB/T 3880-2006  ASTM B-209


1.     Excellent quality of products

2.     Quick delivery

3.     Best service to clients

4.     BV,SGS  avalible

5.     No buckle o waveness

6.     Tension leveling

7.     Certificate of Origin

8.     Form A,E

Packaging Detail: Carton ,Wooden pallet with plastic protection packing,standard seaworthy packing or as your request.


AnnualProduction capacity of 600,000 tons.

Products areexported to United States, Canada, U.A.E, Brazil, Mexico,Thailand, Vietnam,Nigeria  etc, over 100 countries andregions all over the world.

Coveredfactories with full production line

CNBM aluminumproduction base is comprised of 18 aluminumannealers, 10 coil and foilmills, 4 continuous production lines, 2hot rolling production line and 3prepainted lines.


1.     What is the form of payment?

Normally 30% TT, L/C

2.     Type of quotation?


3.     Port of loading?

Shanghai port

4.     Delivery time?

30 day after client’s deposit

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are some unushal properties about Aluminum?
Aluminum is a versatile material with vast applications in engineering, aerospace and automotive industries. Some of its desirable properties include lightweight (relative to steel) and high strength. The metal is however rarely used in its pure form, it is often alloyed with other elements such as Mg, Manganese, chromium, Titanium to fine tune its mechanical, chemical and or physical properties and tailor it to specific applications. However, in some applications other materials are preferred, for example, Magnesium, due to its higher strength to weight ratio is increasingly replacing Al in transmission casing of automobiles. Also, Compacted Graphite cast Iron is preferred in engine blocks because of its superior strength at high tempreatures, dimensional stability and wear resistance. Auto engines work at very tempreatures and alloys that are capable of withstanding high pressures while maintaining stability are critical. CGCI performs better than Al in this situation. Al alloys remains an important engineering materials though.
Q:what’s the difference of activated aluminum and aluminum sheet?
39,the thermal treatment of age hardening aluminum alloy, 40, lanthanum-praseodymium-cerium aluminum alloy and its producing technology, 41,casting method of cool room pack alloy without draft angle, 42, use the anti-corrosion alloy layer to protect the surface of nickel base alloy products, 43,saltless and inoxidizability remelting method of aluminum, aluminum alloy and aluminum waste...
Q:What happens to the aluminum atoms in this reaction?
Aluminum will reduce copper ions (and be oxidized) when chloride ions are present. Otherwise aluminum metal will pretty much just sit there. The reason is the passivating layer of Al2O3 on the surface of any piece of aluminum. This metal oxide layer prevents the metal from actually reacting. But in the presence of chloride ion in water, Al2O3 will react, resulting in AlCl4^- and OH- ions. Al2O3(s) + 8Cl- + 3H2O(l) -- 2AlCl4^- + 6OH- This allows the aluminum metal to come into contact with copper ions resulting in the redox reaction: 2Al(s) + 3Cu2+ -- 2Al^3+ + 3Cu(s) There is a side reaction where aluminum metal reacts with water, and hydrogen gas is produced. 2Al(s) + 2H2O --2 AlOH^2+ + H2(g) When you actually observe the reaction, you will see copper metal being formed, aluminum metal dissolve and bubbles of hydrogen gas being given off. ============ Follow up ============= Because of the passivating effect of Al2O3 and the fact that Al2O3 dissolves in the presence of Cl- forming a new complex ion, AlCl4^-, Brian's answer leaves out a lot of the important chemistry.
Q:How many square meters does the aluminum plate engrave?
The price of aluminum sheet is calculated according to the price of aluminum ingot + processing fee (aluminum plate state), and the specific price is also different according to the size and size of aluminum sheet. If you have any questions, please ask, thank you.
Q:Any difference between aluminum and carbon arrows?
Aluminum arrows do not penetrate nearly as well as the carbon arrows do. The carbon arrows penetrate better due to the carbon arrow generating more speed then the aluminum arrow and the stiffness of the carbon arrow plays a factor in it's superior penetration. If you watch a slow motion video of an aluminum arrow striking a target, the arrow flexes several times upon impact. This absorbs some of the force of the arrow. Carbon on the other hand has almost zero flex when hitting the target, therefore all the power goes into Penetration. Another fact I found out when I made the switch to carbon arrows.They are actually cheaper to use then the aluminum.A dozen carbon arrows will last much longer then a dozen aluminum ones will.You can make an aluminum arrow worthless as a hunting shaft with a broad head on it by merely dinging it a little while target practicing.Or if it becomes bent even if unable to see with the naked eye will ruin it for use with a broad head. Carbon on the other hand will never bend or ding.They last forever unless a deer rolls over on it and breaks it. It took me forever to make the switch to carbon arrows, but once I did I will never go back to aluminum again.In the old days everyone thought that weight alone was the contributing factor to penetration. But now it has been discovered that speed and stiffness are even greater factors that contribute to penetration. Stick with the carbons.
Q:why intact aluminum sheet stop quicker than pectinate one in the magnetic field?
while swinging in the magnetic field, intact aluminum sheets will formulate inner eddy current,that is the annular induced current.eddy current will transform the mechanical energy into heat energy, which makes the aluminum sheet stop quickly.but pectinate aluminum sheet can't formulate intact eddy current, so intact aluminum sheet stop quicker than pectinate one.
Q:Using thin copper sheets and thin aluminum sheets, respectively, from heat source heat conduction to aluminum heat sink, which kind of efficiency is higher?
The key is not copper or aluminum, the heat transfer coefficient between the heat source and the heat sink is more important to the overall heat dissipation effect.In theory, copper is good, but copper is relatively expensive and heat dissipation is a little too high.
Q:Good slogan for aluminum?
Aluminum: Keeping stoners amazed for over 50 years!
Q:what is the best polished aluminum wheel cleaner?
Brake cleaner will stain. You need to go to a local auto parts store, like Pep Boys, or Autozone and get a container of Mother's aluminum wheel cleaner and polish. Then go into the aisle with the rags and get a bundle of terry towels and a bundle of baby diaper towels. You will need to use the cleaner/polish on the terry towels first and work in a circular motion, and don't be afraid to apply pressure. You will start to see the cleaner working when it starts turning black, DONT QUIT YET, continue working in a circular motion, and keep at it. After you are happy with the look of the aluminum use the baby diaper towels and wipe them clean in a circular motion also. You may have to repeat to get the desired effect, but in no time your wheels will look like new (or even better)! I have personally hand polished out many small parts, and even the radiator in my 63 impala (which was raw aluminum) with this stuff and it really works.
Q:Still aluminum in stainless steel cookware?
First of all, there is no link between health problems and aluminum. Years ago, they thought there might be a link between alzheimer's and aluminum, but that has since been disproved. Secondly, stainless steel is a poor conductor of heat. But the stainless is a great, sturdy, non-reactive metal to use for cookware. So they add aluminum or copper to it's core to help it heat properly. Copper will cost you an arm and a leg, so all other cookware uses aluminum. If you had stainless cookware with no aluminum, it would take you an hour to boil water and your food would cook terribly unevenly. The outsides would burn before the inside cooked. So no, you won't find stainless without aluminum unless it's copper cored. But again, aluminum will do you no harm. You wrap your food in tin foil, which is aluminum. You eat food that has been sitting in aluminum cans on the shelf for god knows how long. And the anti-perspirant you use every morning? Check the ingrediants. Aluminum. Right on your lymph nodes. Stop worrying. Still worrying? aluminum is basically poreless. No aluminum will leach through. You are safe.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range