Transparent Blue PE Protective Film S120-50TB
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT Or LC
- Min Order Qty:
- 10000 Square Meters m²
- Supply Capability:
- 100000 Square Meter Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Application: Painted stainless steel is mostly protected with transparent color PE protective film, which will show their original colors. PE protective film will protected the steel from dirt and scratch during production, transportation and installation.
2. Transparent color, transparent blue color, black & white color, white color, red color and so on available as per customers' requirements.
3. The choice of surface protective film depends on the surface: material and roughness. Tell us what surface you want to protect and we will recommend proper film to you.
Technical Data of Transparent Blue PE Protective Film S120-50TBItem Number: S120-50TB
Carrier: PE (polyethylene) film
Thickness: 50micron (0.05mm)
Peel Adhesion: 120g/25mm
Adhesive: solvent acrylic
Color: transparent blue
Temperature Resistance: 60C 48hours no residue
Elongation: ≥250%
Inner Diameter: 3" (76mm)
Length: within 3000meter
Widh: within 1.5meter
Recommended jumbo roll size: 1.0m x 1000m
Packing of Transparent Blue PE Protective Film S120-50TB
Wrapped with kraft paper or carton.
Remarks of Transparent Blue PE Protective Film S120-50TB
A. The data above are typical results and subject to change without notice.
B. Tolerance: 5%
C. The products should be stored at room temperature and be kept away wet and/or heat source.
D. It is essential, the surface of film must be clean, dry, and free of grease and oil.
E. The users should take test and do trial-application on the above product before coming into application so as to witness and ensure suitability for their special purpose and technique
- Q: Is original iPad coated with a protective film?
- No. There's almost nothing complimentary with original iPad.
- Q: How to remove the aging protective film on plastic steel doors and windows?
- 1.Grind the film off using polishing machine. 2. Heating it with electric hair drier and scratching it off. 3. Pouring some boiling water on it and then scratching it off.
- Q: What are the differences between a LCD protective film for laptop and a protective film for mobile phone ?
- The functions of a laptop LCD protective film: 1. Ordinary films: Ordinary films only protect the screen from dust and scratch. This kind of films is commonly used and classified into two types--scratch-resistant(a bit more expensive) and non-scratch-resistant. 2. Functional films: this kind of films has better properties of scratch-resistant properties that can be classified into: A. Anti-reflection films, preventing the reflection of light on the screen, work well on some glossy display. Correspondingly they are more expensive than ordinary ones. B. Anti-ultraviolet-radiation films, protecting your eyes, have different technical content. This type of films is colored film --purple or green. But there's no need to mind the color because it's actually transparent when it cover the screen. The color a41 won't show up. And it won't affect the color displayed on the screen. C. Privacy-protective films. After coated with this kind of films, only looking at the screen head-on, or from no more than 30 degrees to sides, people can see the content shown on it clearly. And this kind of films is the most expensive among all.
- Q: How to remove the shadow of the keyboard protection screen in the notebook screen?. With the lid on, after a night, there was a watermark, which was of poor quality
- The fan stops rotating, causing the inside of the notebook to heat up, slowly forming water vapor. Second days later it will have watermarks!
- Q: Can the TP protection screen prevent the screen from being broken?
- The toughened glass protective film can be affixed to the screen.The toughened glass protective film can be affixed to the screen.
- Q: How to clean up the protective film on the stainless steel door! ! !
- Many people have the same question. The protective film on the stainless steel door is difficult to remove after using fot a long time. Does it work to heat the film with electric hair drier? Is there any other ways? The answer is yes. There are many other ways: 1. If the film is not too big, you can apply some lacquer thinner to it and then scrub it with cleaning ball. 2. Detergent used in textile industry will work (Bottled such detergent is called AL). I've tried it. It really works well. 3. Use sulfuric acid. But you should mix it with water before use, otherwise the door will corrode. Immerge the door into the mixed sulfuric acid for a period of time and scrub it with cleaning ball. 4. Firstly, use electric hair drier to heat the film. And then slowly tear it off or scratch it off using small wooden shovel. The marks left by glue can be wiped off with solvent.
- Q: When you remove the protective film from your cell phone, how can you remove the glue?
- The physical properties of ethanol are mainly related to the properties of low carbon straight chain alcohols. The hydroxyl radical in the molecule can form hydrogen bonds, so the viscosity of the alcohol is large, and the organic compounds with similar molecular weight are not so great.Edible alcohol is one of the raw materials for detergent production.
- Q: There are two screens in the computer screen. One side says "A", and the other is "B". Do you need to paste A first and then paste B? Do you have two at a time? Thank you
- 2. the adsorption layer at the screen corner, make sure the position of alignment, while tearing, back from the film layer on the side of caution to heal, because now the protective film has automatic electrostatic adsorption function, do not need too much wait. The film moves slowly, along the long edge of the screen that a surface, from point to line, from line to surface in order to start.
- Q: What are the main components of PE protective film?
- There are two kinds of PE protective films. One is without glue, directly co-extruded by polyethylene and adhesive material. This kind is called the mucous membrane, which is unharmful. The other needs glue, generally acrylic glue. And it basically does no harm.
- Q: How to get rid of the Kraft protective film on the plastic plate?
- There is no solution, no other way. You can only slowly tear it off.
1. Manufacturer Overview
| Location | Zhongshan, China |
| Year Established | 2004 |
| Annual Output Value | US$ 10 Million |
| Main Markets | 20.00% North America 20.00% South America 10.00% Eastern Europe 10.00% Southeast Asia 10.00% Northern Europe 10.00% South Asia 10.00% Western Europe 5.00% Africa 5.00% Mid East |
| Company Certifications |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Shenzhen Port |
| Export Percentage | 10% |
| No.of Employees in Trade Department | 50-100 People |
| Language Spoken: | English; Chinese; |
| b) Factory Information | |
| Factory Size: | Above 30,000 square meters |
| No. of Production Lines | Above 3 |
| Contract Manufacturing | protective film |
| Product Price Range | High; Average |
Send your message to us
Transparent Blue PE Protective Film S120-50TB
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT Or LC
- Min Order Qty:
- 10000 Square Meters m²
- Supply Capability:
- 100000 Square Meter Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
