Tower Crane TC6014 Construction Equipment Building Machinery SalesDistributor
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 5 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Tower Crane TC6014 Description:
1.CMAX Tower Crane TC6014 is one of the main product of CNBM company, which have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition.
2. Tower Crane TC6014 can adopts standard section hydraulic lifting and connecting, and can decide the crane height according to the actual height of the building, and at the same time the lifting capacity will not be affected.
3. Tower Crane TC6014has high working speed, good speed-adjusting performance, steady operation and high efficiency. Three-speed motor and mono-speed ratio decelerator are applied in the lifting struction, which enables heavy load low speed and light load high speed.
4.Tower Crane TC6014 has complete set of safety devices, which can guarantee the safe and high efficienct operation of the equipment. The machine is equipped with lifting height limiter, dolly range-change limiter, moment limiter,weightlimiter,circumgyrating limiter,and so on.
5.Tower Crane TC6014 has scientific layout and beautiful appearance. The operator's room is set independently on one side, with good vision field. It creates a good working environment for the operato.
Tower Crane TC6014 Parameter:
Max. working range 60m, tip lifting weight 1.4T and Max. lifting weight 8T.
Hoisting mechanism fitted with three speed motor, stable braking and less shock when shifting.
Trolleying mechanism can provide two operation speeds.
Free standing height (m) 46
Max height with attachment (m) 138
Working range can be adjusted (m) 48、54、60
Min working range (m) 2.5
Max lifting capacity (t) 8
Tip load @ 50m (t) 1.4
Tower Crane TC6014 Packaging & Delivery:
40HQ container
20~25days after deposit
Tower Crane TC6014 Diagram:
Tower Crane TC6014 Technical Sheet:
Tower Crane TC6014 FAQ:
1.What is tower crane?
Tower crane is a modern form of balance crane that consist of the same basic parts. Fixed to the ground on a concrete foundation (and sometimes attached to the sides of structures as well), tower cranes often give the best combination of height and lifting capacity and are used in the construction site.
2. What is the meaning of the tower crane’s code?
Take Tower Crane TC6014 for example, the first two letters “TC” means Tower Crane, “60”means jib length is 60 meter, and the last two letter “14” means the tip load is :1.4 ton.
3. What is the principal to quote the right tower crane to the client?
First, we need to know clients’ requirements,for example, max lifting capacity, height, tip load and jib length.. Second, we need to know what the foundation requirement from the client is and Third if there are special needs. CNBM could suggest proposal according to clear data provided by the clients.
- Q: how do i make the paper crane from prison break?
- The okorder /, you have to go to Contents and then choose your animal or figure, then go to Diagrams, at this point a Pdf-file will open, which you can easily save. I saved all of them and then followed his instructions step-by step...it's not easy but it's a lot of fun. If you want to know more about this art you can just tipp the word origami on Google and you'll find lots of tutorials that will help you. I googled myself and I found the above-mentioned site one of the best! Lots of luck and have fun!!
- Q: Method for operating tower crane
- 2.21, drivers must pass the escalator up and down, up and down the escalator, hand tools are prohibited items.2.22 do not drop any objects from tower cranes or defecate.2.23 winter in tower crane operating room heating, should be taken to prevent electric shock and fire measures.2.24 any tower crane with an elevator must comply with the instructions in the elevator manual. No overloading or violation of the operating procedures.2.25 multi machine operation, should avoid two or more than two tower cranes overlap in the radius of rotation. Special circumstances, need to overlap operations, must be safe distance between the vertical arm to ensure the safe distance and the lifting of materials, and have reliable safety measures approved by the competent technical leadership before construction.2.26 jib cranes in heavy lifting off the ground after lifting, rotating and walking three actions can be done at the same time, but the amplitude only alone, strictly with variable load. A crane that allows variable amplitude loading shall not vary at full load or near full load.2.27 lifting hoist is not installed in the rotating part of the crane, lifting operations may not continue in one direction continuous rotation.2.28 a crane with a mechanical torque limiter must adjust the tonnage indicator of the overload limit device according to the radius of gyration and the rated load at that radius.2.29 bend rail subgrade must comply with the provisions of the crane should turn on the outer rail surface of the sand, rail, rail and wings painted with grease. The counterweight box shall be turned to the direction of the outward turn. It is strictly prohibited to do lifting or turning on heavy roads.
- Q: Calculate the work the crane performs.
- Crane work = weight to be lifted x 6.95 m Weight to be lifted = 2.75x10^3 N + 1.20 m^3 (2.00 x 10^3 kg/m^3) (9.8) = 2750 + 23520 = 26270 Therefore, Crane work = 26270 x 6.95 = 182576.5 J
- Q: With hi-rise buildings being constructed left and right, i was just wondering, how do they raise cranes? this has really been bugging me for a time now..
- I think you mean tower cranes, you will notice on these cranes that there is small size pieces and on larger piece with hydraulic jack, when they want to extend the crane , they insert the smaller size piece into the large piece and push up the upper part to insert the new piece and so on. There is also another type of cranes which is the climbing type, they are almost using the same principle but lifting up the crane it self using the concrete shaft
- Q: are they for camera support
- Yes Best of luck with it
- Q: What tower cranes are used on the 30 storey house?
- but if the building steel structure more parts or building the number of square meters more than 60 thousand square meters, you need to consider QTZ80 or more of the tower crane, because the type of large lifting capacity is big, the work efficiency is high. Hope to be of help to you!
- Q: how much does a crane operator make ?
- don't know
- Q: What is the allowable range of vertical deviation for tower cranes?
- Previous answers to this question have been made. In the industry standard "construction site inspection of machinery and equipment technical specification" (JGJ160-2008), in the form of mandatory provisions: the tower crane installation height to basic design requirements, the axis of the tower line should be no more than 0.4% of the bearing surfaces of the lateral vertical deviation; after the attachment, the highest attachment point following the vertical deviation should be less than 0.2%. "The basic height of the design requirements" in the "strong regulation", that is, the maximum independent installation height on the site".
- Q: I want this as a tattoo but I want to know what it means. Why type of tree is it? What do the symbols translate into?
- ?The other answers already have some great info! I live in Japan too so let me try to answer your Q. the best I can from what I know. This image is used for Japanese Congratulations- omedetou おめでとう (omedetai) and good fortune, prosperity and good luck as well. It has a GOOD meaning. When I was married to my hubby here in Japan, some of our wedding gifts were wrapped in Japanese cloth with this image. The bird is a crane, as everyone already said and is the symbol of longevity, long continuance. The kanji is for the word crane (bird) - tsuru 鶴 as also mentioned, in Japanese. The tree is a Pine (tree), or matsu 松. (It's part of my last name!) The center circle is the sun, often seen in such scenes. This design can be found on some wedding kimono in Japan as well as Japanese screens, decorative plates (I have one) and dishes. It's rather beautiful and I think it would be a gorgeous tattoo! Hope this helps!? EDIT: The small red symbol under the big black kanji is just the hanko- Japanese stamp of perhaps the artist. Not really part of the design.
- Q: Four for crane, two for insurance, two for insurance. What does that mean?
- Refers to the air switch and the electric leakage protector in the electric tray.
Send your message to us
Tower Crane TC6014 Construction Equipment Building Machinery SalesDistributor
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 5 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
