TC5613 Hammerhead Tower Crane with CE and ISO9001 Certificate
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Descriptions of our TC5613 Hammerhead Tower Crane with CE and ISO9001 Certificate
1, the topless tower crane reduce the dismounting requirements, lower weight, low mounting height, dismount each mast at a time in the air, save the labor cost, safety and fast.
2, it is suitable for crossover work of the cranes, without the tower cap and pull rod, the safety will be increased when there need the crossover work.
3, It is suitable for the special requirement about the height, such as airport nearby, tunnel, workshop ,and the construction site with high-tension cable.
4, It is suitable for the construction site that has the requirement about the crane boom, it can be used as internal climbing crane in the high-rise buildings, irregular roof or small areas.
5, It is very convenient for dismounting in the restricted construction site, dismount each crane boom at a time by manual.
6, The steel structure of crane boom has long using life and high safety standard.
7, The crane boom is good applicability, high-usage,the design of the topless tower crane boom is easy for realizing the serialization and standardization. Reduce the design and making cost.
8, Low design cost, short cycle, can much better satisfy the multiple demands of the customers.
Tower Crane TC5613 Parameter:
Max. working range 56m, tip lifting weight 1.3T and Max. lifting weight 8T.
Hoisting mechanism fitted with three speed motor, stable braking and less shock when shifting.
Trolleying mechanism can provide two operation speeds.
Free standing height (m) 46
Max height with attachment (m) 150(200)
Working range can be adjusted (m) 44,50,56
Min working range (m) 2.5
Max lifting capacity (t) 8
Tip load @ 50m (t) 1.3
Features of our TC5613 Hammerhead Tower Crane with CE and ISO9001 Certificate
| Item | Parameter | ||||
| Free standing height (m) | 46 | ||||
| Max height with attachment (m) | 150(200) | ||||
| Working range can be adjusted(m) | 44/50/55 | ||||
| Min working range(m) | 2.5 | ||||
| Max lifting capacity(t) | 8 | ||||
| Tip load @ 56m(t) | 1.3 | ||||
| Hoist mechanism | Falls | 2 | 4 | ||
| Lifting capacity(t) | 0-2 | 0-4 | 0-4 | 0-8 | |
| Speed(m/min) | 0-80 | 0-40 | 0-40 | 0-20 | |
| Motor | YZRWFc250M-4/8 30/30KW | ||||
| Trolleying mechanism | Speed(m/min) | 12/27/53 | |||
| Motor | YZTDE132L-4 /8/16 3.3/2.2/1.1KW | ||||
| Slewing mechanism | Speed(r/min) | 0-0.6 | |||
| Motor | YZR132M2-6-3.7KW×2 | ||||
| Climbing speed(m/min) | 0.5 | ||||
| Counterweight(t) | 14.1 | ||||
| Mast section size(L×W×H)mm | 1800×1800×2500 | ||||
| Working temperature | -40-+60°C | ||||
| Max working wind(m/s) | 20 | ||||
| Total power(KW) | 42 | ||||
| Rated working voltage & current | 380V/128A | ||||
FAQ TC5613 Hammerhead Tower Crane with CE and ISO9001 Certificate
1. why chose us?
China National Building Materials (Group) Corporation (CNBM), established in 1984,now is one of the largest state-owned group corporation in China, dealing with building materials & industrial equipment. Up to year 2010, CNBM Group's total asset is 20 billion USD and total staff is more than 100,000.CNBM International Corporation, specializes in designing & manufacturing of various
kinds of construction machinery, including tower crane, building hoist, etc. All the equipment produced by CNBM are compliant with the National level quality standard, and wins great reputation for their endurable performance in worldwide markets.
2.How about the shipment?
You can put 2 sets of of wheel loaders in one 40HQ container. The spare parts are packed with boxes.
The delivery time is 20 days.
3. What about your service?
We have our factory, we can meet customers needs as soon as possible.
We have first rate professional technology and provide good after-sales service.
4.After Sales Service
We offer the Preventative Maintenance and After Sales Service. For we strongly feels about the importance of supporting our customers and the product solutions we provide. Consequently we offer comprehensive maintenance options to prevent equipment issues before they become problems. Also we offer one year guarantee period.
- Q: have you noticed that there has been an exceptionaly high volume of cranes falling over in the U.S.A. this year? 2 cranes went down this week, one in Texas killing a man. seems like there has alot of this lately, what the hell is going on with the cranes? ever night i turn on the news its like a deadly crane accident took place today . thanks.
- Accident Reports Received for year 2007: 347 Deaths for 2007: 176 Accident Reports Received for year 2006: 314 Deaths for 2006: 109 Accident Reports Received for year 2005: 231 Deaths for 2005: 127 Accident Reports Received for year 2004: 287 Deaths for 2004: 142 Accident Reports Received for year 2003: 269 Deaths for 2003: 138 Accident Reports Received for year 2002: 171 Deaths for 2002: 96 Accident Reports Received for year 2001: 161 Deaths for 2001: 107 Accident Reports Received for year 2000: 184 Deaths for 2000: 74 (It gets really scary when you look at the increase of deaths in just a few short years.)
- Q: What is the scope of the installation and disassembly of self lifting tower cranes and the applicable range of the cost and the off-site transportation cost?
- The installation and disassembly of the existing self rated tower crane, the first cost and the off-site transportation cost quota are divided by the lifting moment 1000kNm and 2000kNm of the jack up tower crane.
- Q: Tower crane 5610 why is it called QTZ63?
- QTZ refers to the lifting tower crane, and the 63 is the torque, the unit is tons x meters, generally in accordance with the crane's nominal gravity moment to sub model, which level is close to which model. The latter four numbers, the first two represent larger, the unit is M, and the latter two represent the largest range of maximum lifting weight, the unit is KN
- Q: What is the difference between a jack up tower crane and a fixed tower crane?
- The fixed tower crane means lifting the foundation of the tower body on the foundation or structure through the connecting piece.
- Q: Where i live i get a damn lot of these come in my house.... I usually just leave them unless there are too many. This was before i was told that they are in fact one of the most venomous creatures on the planet. I laughed, but then was told the same by a friend.Im now Little worried about them coming near me. I understand they have no ability to sting but still... Should i worry about them flying around my house? I was thinking if i were to squash one, doesn't that mean the venom is now on my hand?!Are they really the most venomous creatures on earth? Or am i making a mountain out of a molehill? Thanks
- Crane flies are an insect that looks like a large mosquito. They cannot bite you. They have no venom. Some people call them Daddy Long Legs. Daddy Long Legs is also a name used for several spiders, and harvestmen, none of which have a harmful to humans venom.
- Q: First Summary gets best answer...thanks!
- The City is covering itself by shifting the blame form a negligent city inspector to the crane company by charging its owner with Manslaughter Charges. This is typical of civil service personal who forget who they work for (We the People).
- Q: How much should the verticality of a tower crane be controlled? Thank you
- No, the wind speed is not more than 3m/s, the independent state tower (or attached state highest attachment point above the tower axis) lateral verticality tolerance is 4/1000, the highest tower axis perpendicularity allowed attachment line below the point of difference is 2/1000.
- Q: What kind of force acting in the brake system which encounter the lifting material force and to maintain its level.
- Cranes work using hydraulics and cables. The cables are wrapped around pulleys and the pulley is turned using hydraulic power. The brake system is simply stopping the pulley from turning by reducing power. The hydraulic system typically will turn a series of gears which in turn spins the pulley that the cable is wrapped around. It's different than a brake system say on a car where when you hit the brakes, pads squeeze on the interior of the wheel rim slowing it down. Cranes you just reduce power and stop the pulley from turning. They also have emergency stops. Older cranes have wedges that would be released onto the cable and then the wedges would grab the cable and slip into a ring. The narrow end of the wedges would slip into the ring first and then as the wedges increased in diameter the grip on the cable would get tighter and then stop the cable from moving. They also have systems on the pulleys to stop the pulley from spinning. They essentially work the same way as a car break. When the emergency brake is triggered, pads will squeeze on the rim of the pulley to stop it. These mechanisms work by friction. They could also have holes around the pulley and a steel pin would be pushed into one of the holes to stop it from spinning. Of course if the force of the weight exceeded the strength of the pin, it would shear.
- Q: i have 5 tower cranes outside my window at different construction sites and they all position their cranes the same direction at the end of the day. is there a reason for this.
- I can think of a few reasons. The first 2 are safety related, the 3rd is work-efficiency related. 1. To minimize wind loading for the expected wind-direction overnight. 2. To minimize damage to the surrounding area should a failure happen and a crane fall (similar to felling a tree in a forest so it falls in the direction the lumberjack wants it to fall). 3. To leave the boom over the worksite for the next morning's first pickup (so, it would be a coincidence that all the pickup sites were at the same angle relative to the booms). .
- Q: .......rated by the ________ weight it will lift at a ________ radius and ________ boom length.A. Maximum; minimum; maximumB. Minimum; maximum; maximumC. Maximum; minimum; minimum
- All maximum. On some of the older cranes it's written on a plate: so many tonnes at so much radius etc. In the really good old days a pointer needle was on the side of the jib pointing to a scale in tonnes, variable as the jib went in/out/up/down. If you think about it, there's no other way to rate a crane apart from its maximum performance. Hope this helps.
Send your message to us
TC5613 Hammerhead Tower Crane with CE and ISO9001 Certificate
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
