Stretch Wrap Film LLDPE Plastic Stretch Film Jumbo Rolls Pallet Wrapped Film
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 roll
- Supply Capability:
- 1000000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Stretch Wrap Film
Stretch Wrap Film is made of 100% pure sofe LLDPE raw material.
Application of Stretch Wrap Film
Stretch Wrap Film is available in hand-applied and machine formats for product moisture proof, anti-dust, fastening and protecting etc. Our stretch film are widely used in following fields, such as outer packing of corrugated box or pallet, packing of loose and small products together, packing of bare machine etc.
Advantage of Stretch Wrap Film
Economical and Practical
Excellent extension, fight to impale
Excellent ability of binding
Price: According the size and the order quantity
Packing of Stretch Wrap Film
One 20GP container can be loaded about 10-15tons.
By sea or by air all available.
Size of Stretch Wrap Film
Thickness:20-200um
Width:30-300cm
Length:1500-3000m
Notice: Special products made as per customer requirements.
Pictures of Stretch Wrap Film
Specification of Stretch Wrap Film
| Thickness Range | Tensile Strength | Elongation at Break | Angle Tear Strength | Impact Ability of Pendulum | Tackness | Light Transmission Rate | Frog Density |
| Micron | Mpa | % | N/mm | J/mm | N/cm | % | % |
| 15-17 | 37 | 250500 | 120 | 0.14 | 3 | 93 | 2.4 |
| 18-20 | 38 | 300600 | 120 | 0.15 | 3 | 92 | 2.5 |
| 21-25 | 39 | 300600 | 120 | 0.17 | 3 | 91 | 2.6 |
| 26-30 | 40 | 400650 | 120 | 0.19 | 3 | 90 | 2.7 |
| 31-35 | 41 | 450700 | 120 | 0.21 | 3 | 90 | 2.8 |
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and kept from wet and heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.
We have organized several common questions for our clients，may help you sincerely：
FAQ
①How about your company？
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel，is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirements.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q: How are membranes classified?
- HDPE film. HDPE film is a kind of tough semi transparent film. Its appearance is milky and its surface glossiness is poor. The tensile strength, moisture resistance, heat resistance, oil resistance and chemical stability of HDPE films are better than those of LDPE films, and they can also be sealed by heat. But the transparency is less than that of LDPE. HDPE can be made into thin film with thickness of 0.01. L. Its appearance is similar to that of thin silk paper. It feels comfortable and is called "paper film". It has good strength, toughness and opening, and can be added with a small amount of light calcium carbonate to enhance the paper feel and reduce the cost. HDPE paper film is mainly used for making all kinds of shopping bags, garbage bags, fruit packing bags and all kinds of food packaging bags and so on. Because of its poor air tightness and no incense retention, the storage period of packaged food is not long. In addition, the HDPE film can be used as a heat sealing layer of the cooking bag because of its good heat resistance.
- Q: What are the main differences between plastic film and paper in printability?
- And many plastic film surface tension, humorous printing after the adhesion strength, the extent of adhesion, and now are generally oily ink, general two-way stretch method of production of films can be directly printed,Such as BOPP, BOPA, BPET and so on,
- Q: What is the plastic film under the wooden floor?
- It's called damp proof cotton. It has thick and thin film with film and without film. You need to use a thick film to use, and the interface to connect
- Q: After decorating, how can the plastic film on wooden board be peeled off?
- Take it off slowly. Maybe you are too impatient. You can use the blade carefully to expose the corner
- Q: Method for removing stainless steel plastic film
- Because of their environmental protection characteristics, many water-soluble films have attracted extensive attention in developed countries all over the world. Abroad are Japan, the United States and France etc. the production and sales of such products, such as the United States W.T.P company, C.C.L.P company, GRENSOL company in France and Japan synthetic chemical company and so on, the user is also some well-known large companies, such as Bayet (Bai Er), Henkel (Henkel), Shell (Shell) etc..
- Q: Will plastic films refract light?
- Agricultural film is made of ordinary plastic, commonly known as PE film, in high temperature (100 degrees or more), slightly poisonous, good point inside the PE film, added anti ultraviolet material, sunscreen good point (use time will be longer).
- Q: How many days can the concrete be taken away from the concrete?
- Plastic film maintenance refers to the plastic film Wei cover to separate the concrete and air, the water is not evaporated, cement concrete in the water to complete hydration, has reached condensation, hardening. This method can be directly covered in plastic draft on the surface of concrete, or plastic sprayed on the surface of emulsion concrete, until the emulsion of volatile, with a layer of plastic film on the surface of the concrete, in order to make the concrete component isolated from the air to the concrete moisture evaporation and no hydration complete the function. Spray plastic film maintenance is 28d concrete strength low around 8%, because the film is thin, can not be completely separated, frozen adiabatic effect, so in the summer of this method is to add sunscreen facilities (not less than 24h), or will lead to concrete cracks producing filamentous. Generally speaking, the cost of natural maintenance is low, the effect is good, but the maintenance period is long. In order to shorten the curing period, increase the turnover rate of the template and the utilization rate of the site, it is suitable for heating maintenance in general production of prefabricated components.
- Q: Is it good to use paper bags or plastic film bags?
- With asbestos mesh (general dish pack more use of this media) direct contact with the disk, the relative effect is better
- Q: How to choose PE plastic packing film
- The barrier properties of plastic film to prevent performance of oxygen, carbon dioxide, nitrogen and other gases, water vapor and aroma substances through, without clear scope, more commonly refers to oxygen, carbon dioxide, nitrogen and other non-polar gas barrier. The effect of plastic film on the display of goods is closely related to the transmittance, haze, gloss, antistatic and printing properties of the film itself. It is necessary to pay enough attention to the light transmittance and fog.
- Q: How to remove plastic film that is attached to stainless steel door for a long time?
- 1: use the hair dryer to protect the film. Use the hot air blower to blow the glue. After it has melted, tear it off gently. In addition, the remaining glue, continue to use blowing, and then use plastic film will remain glued down.Two: plastic film used to isolate the stainless steel door and air contact, better protection of appearance.
Send your message to us
Stretch Wrap Film LLDPE Plastic Stretch Film Jumbo Rolls Pallet Wrapped Film
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 roll
- Supply Capability:
- 1000000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
