Stain Steel Specification Of Centrifugal Pump For Water
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Stain Steel Specification Of Centrifugal Pump For Water
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product Parameters of Stain Steel Specification Of Centrifugal Pump For Water
| Capacity: | 6.3~400m³/h |
| Head: | 5~125m |
| Speed: | 2900r/min and 1450r/min |
| Power of fitted motor: | 0.55~90kW |
| Inler diameter: | 50~200mm |
| The max working pressure: | 1.6MPa |
Application Range of Stain Steel Specification Of Centrifugal Pump For Water
1.Suitable for environment protection, construction, fire fighting, chemical pharmacy, printing, dyeing, brewage, power plant, electroplate,
paper making, washing for mining and cooling for equipment.
2.Application as sprayer equipped with beam nozzle that turning water into little drop irrigation for farm, garden, etc.
3.It is suitable for clear water, sea water, acid or alkali chemical medium and slurry (viscosity≤100 centipoise, consistency of solid can not exceed 30% of total medium).
Stain Steel Specification Of Centrifugal Pump For Water Features
1. Resistant to acid, alkali, wear and high temperature.
2. High mechanical strength, steady performance, good tightness.
3. Convenient operation and durable.
4. Be able to transport water that under the position it was installed. No need for filling liquid after the first time it was used.
Stain Steel Specification Of Centrifugal Pump For Water Superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Pictures show
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
After-sales service
Transportation
Related products
|
|
Fire Pump Cast Steel High Speed China Made | Cast Steel Centrifugal Pump High Pressure |
| http://www.okorder.com/p/fire-pump-cast-steel-high-speed-china-made_976663.html | http://www.okorder.com/p/cast-steel-centrifugal-pump-high-pressure_975173.html |
- Q:I am new to saltwater tank, and i what to add a sump to my tank, but I don't know what to add to it. what water pump? do i add the filter to the sump or does the filter stay in the tank.
- If you're using a sump, the pump you use will have to be chosen based on the size of your tank and how much flow you need. The kinds of fully submersible pumps that are used for ponds and other aquarium applications are best. You really could put your filter on either, but most people I know that keep saltwater [and myself included] keep filters, heaters, and skimmers in the sump so they're out of sight. This also gives you more room in the display tank for live rock and fish if the equipment isn't crowded in there. All you really need to have in the display are powerheads to keep the water circulating so dead spots don't build up. And without the equipment hanging on the back, and only power cords coming out, you can use a glass cover to reduce evaporation and keep your fish from jumping out.
- Q:The pond is 10' long x 2' wide x 1' deep. The pump is at one end and water is raised 1' to a buried garden hose that is maybe 12' long and then at the end it goes up 2' to release the water over some rocks. I had a 330 gph pump that worked well but died. That size has been discontinued. Go smaller or bigger? DON
- the pro's for having a liner is which you have greater freedom to create your person pond and how that's formed and the intensity of it. The con's are somewhat that it takes some paintings, quite in case you're digging it by potential of hand. With an pre-shaped pond, the paintings is greater basic yet you're constrained to the layout and intensity by potential of what's given to you. some pre-kinds do no longer supply sufficient room in case you will desire fish and vegetation and ornamental freatures like rocks. My opinion is to place a pond in with a liner. I somewhat have build some and it grants greater freedom to create. I make certain I somewhat have the pond deep adequate. in case you will desire a water lily, some desire to be put in 2 ft of water. in case you will desire fish and desire to over wintry climate them interior the water, they ought to have a minimum of two a million/2 ft of water (nevertheless I deliver mine in during the wintry climate in a tank I somewhat have interior). I additionally desire to have some shallow areas in my pond. Birds can bathe and drink the water and that they seem to be a good allure to the pond. reckoning on the dimensions of the pond, you should make certain you have a huge adequate pump and filter out equipment. To small of the two, and your pond will seem undesirable. One pond I put in did no longer have a filter out equipment in it and that i had a lot of alge and the pond grew to become into merely a multitude. I put in a filter out the subsequent 3 hundred and sixty 5 days and it grew to become into an incredible purchase greater useful! putting in a 'liner' pond would fee a sprint a sprint greater and be a sprint greater paintings, yet think of that's somewhat worth it. this way you're unlike every person else that has there little 'insert' pond.
- Q:Can someone please post a picture of how to find a Water Pump on a 1992 Dodge Spirit with a K2.5L Engine, it would be much appreciated. :)
- The cooling system on your engine circulates water from the engine into the bottom of the radiator and then from the top of the radiator back to the engine. At the bottom of the radiator will be a black water hose. Follow it back to the engine. That's the water pump.
- Q:ok im ready to install my new water pump but it has to gasket in the package i no where one goes it shapes to the water pump but i dont no if the other one is used, and also where does the o ring go in the big hole in the center does it have to be pushed down into a seem or something and do the to out side holes need o rings as well, and does the hermonic balancer seal need to b replaced
- The water pump should come off the block with 4 bolts, the gasket goes between the body and rear plate. The o- ring fits onto the transfer tube that travels between the valley of the block. Add a little lube to it to make installing the pump and cover easier. The lower t belt gear should slide off easily, if not a bit of heat may help, careful not to break the oil pump (front end of block). The upper cam gears are best loosened slightly while the belt is still installed. If not try slipping the old belt over the gear and holding the outside of the gear/ the belt. Air tools may be required due to torque required.
- Q:my water pump went bad on my 1997 chevy cavalier, causing it to leak all the coolant it had in the system. i put water in it til i could get new water pump. changed out water pump. attempted getting air out of system. put more concentrated coolant in system than i did water. bad guessing on my part. ran car around block 5 times. it was fine. this morning on the way to work, it started overheating again. my thoughts : more air in system that's not coming out? thermostat REALLY went bad at same time as water pump???? overheating all because of a little too much coolant??? for some crazy reason, my system needs to be suddenly flushed? Your thoughts? one last thing, the car has always ran perfectly normal temp til water pump went bad.
- Check your radiator,check your radiator fan to see if it works! Sometimes they go bad or their sensor won't work anymore and the car is overheating the sensor doesn't pick that up and the fan won't start! That's make the car overheating!
- Q:The pump works and water goes to the house from the reserve tanks but there can be long delays before it cuts in after mains pressure is lost. After it stops the pressure gauge falls back slowly to zero. Pressure vessel is a sphere has a valve on top. Any suggestions ?
- The guage is probably broken, but that is mostly for reference for setting your start/stop switch. Now, first off I'd check your bladder tank. A bad bladder tank will still give you some pressure but causes the pump to run almost constantly. To test that, there is a bicycle looking air valve sticking out of the bladder tank. Push a key or something in it as if you were to let air out of a tire. If any water comes out, your bladder is bad and has to be replaced. If you have an older style deep well, like a well house where the pump is accessible, check the switch, (little black box attached to the pump). There are two screws that can be turned. One sets the pressure the pump will turn off at and the other adjusts the minimum pressure you want for the water to turn back on and fill your tank. A lot of people go 20/40, I run mine at 30/50. Much more than that and you can run into problems, especially if you have cpvc pipes. They will weaken at the elbows and 60 psi of water can eventually make pin hole leaks. This is from personal experience. You will need a working gauge to set this. If the bladder is not your problem, email me and I'll give you more details on how to set your pump if you need it. Or, you can buy preset switches at your local hardware for $20 and just swap it out. In that case, do not mess with the adjustment screws.
- Q:I have a 1999 Mercury Grand Marquis vehicle. How do you know when the water pump is going. Is their any particular noise I should be hearing.
- There is no noise associated with a water pump going out that I am aware of other than the engine exploding due to excessive heat. The dash guages; especially the engine temp guage, will give you a clue as to a cooling problem, whcih is what the water pump is for. The water pump prevents the engine block from overheating. When the pump fails, the engine overheats and will either shut down, or the engine will burn out. The best way to tell is to monitor the temp guage. If the engine is running hot, it either the water pump, lack of water in the cooling system, or Thermostat failure. Best to have a mechanic check it out. Cheers!
- Q:I was wondering if the noise from a water pump can bother my crested gecko. I have a water pump that cycles the water that is in the leca balls, it does not make a load noise but the noise is there. Will this bother him?
- It could potentially. Just see how he does-any decrease in activity or appetite-86 the pump
- Q:I have a 2000 Ford Focus with 82k miles on it. The car is leaking coolant intermittently. The radiator was replaced about 3 yrs ago. The car doesn't overheat but when I turn it off I can hear a boiling sound and it smells like something is burning. It's not a strong smell but it's there. The car also idles rough and downright shakes at times. Also, and I know this sounds crazy, when I'm driving it I hear a sort of whooshing noise that sounds like water. Could this be the water pump or something more serious? I'm taking it to the mechanic tomorrow but would like an idea as to what could be wrong.
- 2000 Ford Focus Water Pump
- Q:I need to get my timing belt and water pump replaced, its been 100,000 km , just wondering, what exactly these things do, i want to know more about my car, and just how much this would cost to take care of, my dealership says almost a 1000, including labour, does this seem right.
- First, what determined the desire for the timing belt? If this is as a results of get replaced as area of the commonplace upkeep agenda, wonderful. And why do you want a gas pump? If the vehicle runs wonderful because it truly is, i might want to question that. The gas pump is often placed contained in the gas tank that is a discomfort to interchange, so i'm not particular that that complete fee is quite unreasonable. BTW, even as replacing the timing belt, this is consistently stated you replace the water pump at the same time, because this is placed good there, and may want to dodge having to do a similar troublesome artwork lower back between belt replacements. you may also call diverse different shops on your area and get an estimate of what they could fee for a similar service. also, you should use the link presented to locate a mechanic on your area who has strong comments thoughts from purchasers. seek for 'locate a Mechanic and enter your zip code for the information...(you may want to favor to envision out the full web site, for interesting and vehicle information)... wish that permits! EDIT: sure at 110k it truly is going to be due for the T-belt/water pump, now this is merely buying the deal!
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Stain Steel Specification Of Centrifugal Pump For Water
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
