Solar panels enrollable production monocry stalline 395-415W solar outdoor solar panel NCQ
- Ref Price:
-
- Loading Port:
- SHANGHAI
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 pc
- Supply Capability:
- 100 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
ELECTRICAL DATA*STC
TYPE(Tolerance:0-+5W) | JT395 SEh | JT400 SEh | JT405 SEh | JT410 SEh | JT415 SEh |
Maximum Power Pmax (W) | 395 | 400 | 405 | 410 | 415 |
Maximum Power Voltage Vmp (V) | 30.7 | 30.9 | 31.1 | 31.3 | 31.5 |
Maximum Power Current Imp (A | 12.87 | 12.95 | 13.03 | 13.10 | 13.18 |
Open Circuit Voltage Voc (V) | 36.8 | 37.0 | 37.2 | 37.4 | 37.6 |
Short Circuit Current Isc (A) | 13.72 | 13.80 | 13.88 | 13.95 | 14.03 |
Module Effciency (%) | 20.2% | 20.4% | 20.7% | 21.0% | 21.2% |
STC: Irradiance 1000W/m², Cell Temperature 25°C, Air Mass AM1.5
Measuring tolerance: :±3%
ELECTRICAL DATA *NMOT
Maximum Power Pmax (W) | 298.65 | 302.47 | 306.31 | 310.17 | 314.06 |
Maximum Power Voltage Vmp (V) | 28.8 | 29.0 | 29.2 | 29.4 | 29.6 |
Maximum Power Current Imp (A | 10.37 | 10.43 | 10.49 | 10.55 | 10.61 |
Open Circuit Voltage Voc (V) | 34.5 | 34.7 | 34.9 | 35.1 | 35.3 |
Short Circuit Current Isc (A) | 11.06 | 11.12 | 11.18 | 11.24 | 11.30 |
NMOT: lrradiance at 800W/m², Ambient Temperature 20℃, Wind Speed 1m/s
MECHANICAL DATA
Solar Cell Type | Mono 91x182 mm(3.6x7.2 inches) |
Number of Cells | 108[2 x(9 x 6)] |
Module Dimensions | 1722*1134*30 mm(67.8*44.6*1.2 inches) |
Weight | 20.5 kg(45.2 lb) |
Front Cover | 3.2 mm (0.13 inches), high transmission, AR coated tempered glass |
Back Cover | White composite film |
Frame | Silver, anodized aluminium alloy |
J-Box | ≥IP68 |
Cable | 4.0 mm² solar cable, 300 mm(11.8 inches) |
Number of diodes | 3 |
QUALIFICATIONS & CERTIFICATES
v IEC 61215,IEC 61730, IEC 62941
v ISO 9001: Quality Management System
v ISO 14001: Environment Management System
v ISO 45001: Occupational Health and Safety
JETION SOLAR
As a member of CNBM - a Fortune 500 company, Jetion Solar provides various product solutions,global EPC service and financing. lts standard and high-efficiency product offerings are among the most powerful and cost-effective in the industry. Till now, Jetion Solar has cumulatively more than 10 GW module shipment and 1 GW global EPC track records.
FAQ
1.how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2.what can you buy from us?
Inverter, Solar Panels, Solar Panels Brackets, Lithium Battery
3.why should you buy from us not from other suppliers?
CNBM is a group company with skillful technical team. With First class pre - and after - sales service. We also are agent of HUAWEI inverter, Longi Solar Jinko solar and so on. The solar products will supply you with under market price.
4.what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card,PayPal,Western Union;
Language Spoken:English,Spanish,German,French,Arabic
- Q:Does anyone know how I would go about hooking up the air conditioners in my house to solar panels? I would want just the air conditioners to be powered by solar energy. How could I hook it up where the panels can absorb energy from the sun during the day, and save and store the energy so I can run the air conditioners at night? I really feel that in the long run, this would save a lot of money with the energy bill. It's the use of the air conditioners that drive up the bill. Is this idea feasible? Is it also possible to have some sort of hybrid system where I can switch from solar to my regular local energy source when I want to?
- Why pay thousands of dollars for solar energy ($27,000 average cost) when you can build your own solar panel system for just a fraction of the retail cost. You can build a single solar panel or you can build an entire array of panels to power your whole house. Some people are saving 50% on their power bill, some people are reducing their bill to nothing. But what’s most impressive is that just by following these instructions some are even making the power company pay them!
- Q:I am thinking of buying a 3w solar panel called the nomad 3 from goal zero. I want to charge 35Wh lithum batteries. I have heard that lithium batteries are temperatmental and without a regulated current things could get ugly.I have a couple of chargers that came with the batteries. One is a 2v car charger and another is 0-240v wall charger.Goal zero sell something called a sherpa 50, which contains rechargeable batteries and an inverster and I think they suggest that I charge my batteries indirectly through the Sherpa 50, however, the sherpa 50 is expensive at $200, and seems to have a small capacity, in addition to being extra weight that i don`t want to carry.Electronics geniuses, you are my only hope.
- Lithium batteries do have special charging requirements. I would recommend that you use the 2 volt charger that came with them to keep them happy. Automotive power systems can have voltages as high as 4.5 volts when the engine is running so there's no need to limit the output of the panel to anything less than that. Check with the charger manufacturer to see what it will withstand. Some will work with systems up to 24 volts nominal (up to 29 volts actual) found in larger commercial vehicles such as trucks and busses. If your charger will work with both 2 and 24 volt systems you might not need anything extra to use the unregulated output of the panel. Otherwise I'd recommend a shunt regulator to clamp the output of the panel to no more than 4.5 volts. That way it would dissipate (waste) very little of the panel's power, and even that would only be during those rare times when the panel is producing maximum output. Such a device could be as simple as a high power zener diode, a low power zener coupled with a power transistor, or a precision shunt regulator such as a TL43 coupled with a power transistor. A more complex way would be a to use buck/boost regulator between the panel and your charger. You might gain a slight advantage under low light conditions when the panel isn't putting out much but the overall efficiency could end up worse than the simpler shunt regulator. Under optimum conditions, I would expect it to take a full day for a 3 watt (peak) panel to charge just one of your 35 Wh batteries. Charging an intermediate device such as the Sherpa 50 through its built in charger and then using it to charge your battery through yet another charger would severely cut your overall efficiency. Depending on how long you'll be gone, it might be far more practical, reliable, and economical to just carry (or find a way to be resupplied with) a few additional fully charged 35 Wh batteries. Don
- Q:What would it take to make a heater for a small solar panel. I am looking into making a heater for a livestock tank to keep ice melted. I know that heaters take alot of energy to run, but my theory is that if heated mirrors on a car can melt ice with low voltage and im sure not extreme heat (40-60 degrees) then making a heater with just high enough temperature to keep from icing over and melting ice is possible. Where do I start? I would like to use an inexpensive solar panel that will generate enough heat to keep ice from forming and melt it at the beginning of the day. How can you make such a heater and apply Ohms law so that it will function correctly, what Wattage will the pannel need to produce to generate enough heat for the heater. The device will only have to be large enough to melt a spot large enough for an animal to drink.
- Short answer is yes. Good to start out a large tank, or big rock to mount your collectors on. Something the stock won't eat or push over. I would start with a swimming pool solar collector. It is just a big piece of black plastic aimed at the winter sun. A collector with insulation and covers will give more heat per sq foot and cost more. Big mirrors and a black painted stock tank might be enough. Insulation of the tank might help a lot. Is the water liquid when pumped up the tank? Do you truck the water in? Is there any electric power wired there or near by? Electric solar collectors can pump and heat water and charge batteries, but it is also possible to circulate water using a thermosyphon set up. You don't have to use photocells. If it gets cold enough some collectors can freeze solid and damage themselves. There are collectors that contain two loops one water the other antifreeze.
- Q:i have a calculator with a solar panel what could i power with it? like could i hook it up to a psp even though it will take forever to charge? and how would i do this?
- All stable suggestions, yet you like 2 AA cells to keep the skill from the image voltaic panel to coach at ineffective night. The calculator probable has 2 or 3 rechargeable button cells. I somewhat have chanced on that non rechargeable Energizer or Duracell alkaline AA cells artwork sensible in those exterior/exterior LED lighting fixtures furniture furniture, so as which you would be waiting to recharge between short heating classes with an incandescent or a LED a lot longer. it is going to take distinctive days to recharge a pair of rundown AA with one calculator panel, so as which you will desire to decide utilising 2 or extra beneficial panels (in sequence if the calculator in simple words has one button cellular). 2 photograph voltaic panels in sequence from exterior LED lighting fixtures furniture furniture, could desire to recharge your AA cells in some hours of staggering photograph voltaic. I somewhat have 2 exterior lighting fixtures furniture furniture I keep charged via putting them the incorrect way up (without the stake and, defuser globe) on appropriate of CFL bulbs, one in each and every of that's 0 watts = forty watt equivalent. Neil
- Q:Can solar panels be installed on forests or protected areas?
- Solar panels can be installed on forests or protected areas, but it is important to carefully consider the potential environmental impact and sustainability of such installations. Proper planning and assessment should be conducted to determine the potential disturbance to ecosystems, wildlife habitats, and biodiversity. In some cases, it may be more appropriate to explore alternative locations or prioritize the use of existing infrastructure for solar panel installations.
- Q:Can solar panels be installed on community buildings?
- Yes, solar panels can be installed on community buildings. Installing solar panels on community buildings is a popular and effective way to generate clean and renewable energy for the community. It not only helps reduce electricity costs but also contributes to a sustainable and eco-friendly environment.
- Q:I want to know that, is there any thing likehow much charge we can get per square feet. in a solar panel.let me know.also, I will appreciate if reference are given.
- What okorder /
- Q:Can I add reflectors or mirrors around the solar panels to increase the power they generate?
- In the 70's when silicon was really expensive, they played with using fresnel lenses to focus the sunlight on small solar cells but these panels had to be on heliostats and aimed directly at the Sun. These days, with nano-technology, there's a renewed interest in the concept but the fundamental weakness is that there are diminishing returns, at some point, it's just less expensive to have more solar cells.
- Q:How do solar panels affect the energy independence of a building?
- Solar panels can significantly enhance the energy independence of a building by harnessing renewable energy from the sun. By generating electricity onsite, solar panels reduce the building's reliance on the traditional power grid, thereby decreasing the need for fossil fuel-based energy sources. This increased self-sufficiency empowers the building to meet a portion or even the entirety of its energy demands, reducing costs and environmental impact while promoting sustainability.
- Q:I have a solar panel I bought for a diy project and it has a small plug on the end of it, but I need to remove this plug to expose the positive and return wires so I can solder a bunch of stuff together. How do I cut off the plug without shorting out the solar panel when I make the cut? Can I just leave it in the dark a while before cutting? I don't think I can remove the wires from the solar panel end before cutting.
- Just cover the panel and cut the wire the voltage will be so low it would be like shorting out a battery
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Solar panels enrollable production monocry stalline 395-415W solar outdoor solar panel NCQ
- Ref Price:
-
- Loading Port:
- SHANGHAI
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 pc
- Supply Capability:
- 100 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
