Mono Solar Panels CNBM 235W

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT or L/C
Min Order Qty:
1 Sets watt
Supply Capability:
10000 pcs per month watt/month
Inquire Now Customer Service

Contact us by

(1) WeChat
(2) Whatsapp: +8618101089932

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction of  Mono solar panels CNBM (235W)

CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.

 

Characteristics of  Mono solar panels CNBM (235W)

I.Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II.Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III.EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.

IV.AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.

V.Junction box: Multi function junction box with water proof.

VI.Long lifetime: ≥25 years; Less power decrease.

VII.Good performance of preventing from atrocious weather such as wind and hails.

VIII.Resisting moisture and etching effectively, not effected by geology.

IX.The certificate issued by international authority: UL, TUV, IEC, VDE, CE.

 

Standard Test Conditions of Mono solar panels CNBM (235W)

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

 

Advantages of Mono solar panels CNBM (235W)

• CNBM Solar performance guarantees for 25 years

• 10 years guarantee for workmanship

• Timeliness of delivery

• Quality Products certified (TÜV, UL, CE, VDE, ISO)

CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel manufacturer in China, we strive to provide our customers with excellent service, superior products and unmatched value.

 

Datasheet of  Mono solar panels CNBM (235W)

Characteristics of  Mono solar panels CNBM (235W)

Max Power Voltage Vmp(V) 

30.3

30.8

31.1

31.4

31.85

Max Power Current Imp(A)

7.60

7.64

7.73

7.81

7.85

Open Circuit Voltage Voc(V)

36.1

36.6

37

37.3

37.68

Short Circuit Current Isc(A)

8.50

8.55

8.65

8.75

8.85

Max Power Pm(W)

230W

235W

240W

245W

250W

 

Temperature Coefficient of Cells Mono solar panels CNBM (235W)

NOCT 

45℃ ± 2℃

Temperature Coeffucients of Isc (%/℃)

 0.0492

Temperature Coeffucients of Voc (%/℃)

-0.3374

Temperature Coeffucients of Voc (%/℃)

-0.4677

 

Mechanical Data of Mono solar panels CNBM (235W)

Dimension 

1638 ×  982 × 40 mm

Weight

19.5 kg

No. of Cells and Connections

60 (6 ×10)

Tolerance

0 ~ + 5 W

Cell

Monocrystalline Cell 156 × 156 mm

Packing

624 Pcs/40ft(H) Container

 

Limits of Mono solar panels CNBM (235W)

Operating Temperature

-40℃ to +85℃

Storage Temperature

-40℃ to +85℃

Max System Voltage 

1000VDC(IEC) / 600VDC(UL)

 

Guarantees of Mono  solar panels CNBM (235W)

Products Guarantee

12 yrs free from defects in materials and workmanship

Performance Guarantee

No less than 90% within 10yrs and no less than 80% within 25yrs

Certificates 

TUV(IEC61215&IEC61730),VDE(IEC61215&IEC61730),UL,CE

 

 IV Curve of Mono solar panels CNBM (235W)

IV Curve of Solar panels

The data does not refer to a single module and it is not part of the offer

It is only for comparison only to different module types.

 

Test Conditions of  Mono solar panels CNBM (235W)

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

 

Picture 1. The factory indoor sight of  Mono solar panels CNBM (235W)

Solar panels CNBM 230W-250W

 

Picture 2 the package of the panels of Mono solar panels CNBM (235W)

Solar panels CNBM 230W-250W

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How can I run my house purely off of solar panels?
There are a variety of factors that come into play in order for you to calculate the answer. Additionally, there are a number of variables that can make the answer change over time. The number of solar panels you need to install to power your home will depend upon your electric power demands, the weather in your area, the angle of your roof, shade issues from nearby trees or buildings and the size of the cells. All of these factors are important and must be built into your calculations so that you can create the best solution for your home and your future needs.
Q:What should the voltage be on a small marine solar panel?
Mark, the 2 vdc is pretty typical. Most panels for home use are set up to charge 2 volt batteries, and they are wired for an, open circuit voltage of 8 to 9 volts. This allows it to have enough voltage to feed through a few diodes, perhaps a charge controller and 30 or 40 feet of wire and still have at least 5 volts left over. Once you connect it to the battery the panel will drop to whatever the batteries charging curve voltage would be. If you have a few minutes, I would suggest getting a book at the library called, The Complete Battery Book, by Richard Perez. Just read the chapters pertaining to lead acid batteries, the other discussions on lithium, ni cads and such won't apply to your boat system. If your panel is not large, and it's short circuit current rating in amps is less than 2% of the amp hour capacity of the battery, you can even run the panel without a charge controller. The book explains this as well. There is a great magazine that gets into the nuts and bolts of this stuff, it's called Home Power, you can find it online. You might also find some info at a couple renewable energy websites, I will list them below. Panels are rated in two ways, open circuit voltage, which you measure with a multimeter while the panel is in open sun and nothing is connected to it. The other rating is short cirucuit current, which you measure with an ammeter while the panel is in the sun as well. You connect the ammeter across the output of the panel and let all the power short right through the meter, so you'll need an ammeter big enough to handle more amps than the panel puts out. A 0 amp unit will work for your boat panel. These tests won't hurt the panel, or the meters, we do it all the time in the field, and the manufacturers will tell you to do the same test if you have a problem with a panel and they want to know if it's malfunctioning. You can check one of their websites if you like. Good luck Mark, and take care, Rudydoo
Q:how much would it cost to generate MW electricity by solar panels??? and how much land it requires ?
First off, you should consider cost per kilowatt-hour (kWh) since kWh is energy whereas MW is power, and kWh is a common unit of energy used by power utilities. But first you would need to design the power capacity required, which as you state, is assumed to be MW. Average system costs = $95 per square foot Average solar panel output = 0.6 watts per square foot Average solar energy system costs = $8.95 per watt Form this information, the capital cost of installing MW = $8.95 /W * 0^6 W/MW = $9 million. The lifetime of a typical solar power system is probably about 20 years. Assuming a true MW peak output of the solar panel it would be anticipated that a daily average energy production would be peak output over about 3 hours per day, or 3 MWh of energy per day. Total production over a 20 year system life would be 3 MWh * 365 days/yr * 20 yr = 22 x 0^3 MWh So in terms of costs of capitalization of the system, the cost of Energy (/kWh) = $8.95 million / 22 x 0^3 MWh = $0.40 / kWh (approximately) This cost does not include maintenance, however, given the simplicity of these systems; other than periodic equipment replacement, which is covered by specifying a 20 year complete system replacement; other maintenance cost should be relatively low. The required surface area of solar panel = 0^6 W / 0.6 W/ft^2 = 94,340 ft^2 or a little over 2 acres of panel surface area. To be able to properly access and maintain the solar array, the minimum area required would likely be 5 to 0 acres.
Q:Need help with building a project involving solar panels?
Solar panels are designed to be used to recharge a battery or series of batteries, not for direct power. That is the inherent weakness of solar systems. The only way to have it work in low light conditions if to have several cells wired in series and have a voltage regulator to limit the amount of voltage that can be supplied. Other than that, add a battery and a charging circuit that the cell would supply power to.
Q:Solar panel placement idea?
The MOST efficient placement is on a motorized mounting that constantly moves it to face the Sun directly. Almost nobody does that because it is clumsy and expensive. The best fixed position is facing X degrees due south of straight up, where X is your latitude. I am in Austin, at about 30 degrees latitude, so on the south side of a 30 degree pitched roof would be ideal. The direct south facing it the best average to catch morning and afternoon sun, with most efficient pointing at noon. The tilt equal to latitude is the best average between the high Sun in summer and low Sun in winter, with most efficient pointing in spring and fall.
Q:how much is one solar panel?
no one has answered because you asked a question that cannot be answered. It is exactly the same question as how much is a car?. Do you want a passive solar heating panel, a solar electric panel, .5 Volts, ,000,000 BTUs, do you want just the panel or the panel installed and functioning, or what? the answer is between $5 and $5,000,000.
Q:Solar Panel Question...?
Nice enough idea you have there, but practical reality is waiting to bring you back to your senses. The appliances you want to operate take a lot of power. You would need an awful lot of solar cells or a very cumbersome windmill to provide sufficient energy for them. You will find that for a mobile kitchen, an ordinary generator running on gasoline or diesel will be much less expensive to buy and maintain, less trouble to haul around, and much easier to replace if necessary. Considering that propane will probably prove less expensive yet, go with that for as many appliances as possible.
Q:solar panel for 2 batteries(2 V)?
I don't know what you have avilable to you down there, but if you were in the states i'd say go to a camping supply store they have lots of solar options out today. check one link below
Q:how much energy does a 70x70 sq ft area of solar panels collect?
This question is too generalized to answer. Are you australia? If so ergon buys the power back at 45cents a KWH which is 3 times what they sell it for.(this is guaranteed for 20years) We have a 2.4kw system and it will take approx 5years to pay itself off. Once carbon trading is in full swing electricity costs are going to go up by 40%, then obviously it will take approx half the time.
Q:What is the working principle of solar panels?
The production of solar cells is mainly based on semiconductor materials, its working principle is the use of optoelectronic materials to absorb light energy after the photoelectricity in the conversion reaction, according to the different materials used, solar cells can be divided into:

1. Manufacturer Overview

Location Jiangsu, China
Year Established 2004
Annual Output Value Below US$1 Million
Main Markets Australia;Asia;South East Asia; South America;North America; Europe;Africa
Company Certifications ISO 9001:2008; CE; TUV; UL

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Shanghai
Export Percentage 1% - 10%
No.of Employees in Trade Department 200-300 People
Language Spoken: English;Chinese
b)Factory Information  
Factory Size: Above 8,000 Square meter
No. of Production Lines 6
Contract Manufacturing OEM Service Offered;Design Service Offered
Product Price Range Average
客服
live chat