Q:The faucets are Kohler faucets and they are probably not brass but are brass colored. Any suggestions you might have will be appreciated.

if you aren't sure if it actually is brass i'm not sure how well of a job it will do in polishing it. Basically most polishes work by rubbing off the oxide that has formed. I'm not sure how brasso wil react with non-brass metals, the same way iwouldn't polish sterling silver with brasso. if anything might i suggest some sort of home concoction? I Think vinegar was something peoples used as polishing. It has an acidic property to help remove the oxide, but no chemicals to worry about that might mingle with the metal. I don't recall what else they mix with the vinegar. You can just google "home made polish" I'm sure it'llg ive you a list of them Well good luck with your fixtures.

Q:With a set of taps on the stone basin

Aluminum alloy plating about 30 yuan, pure copper polishing, you need about sixty yuan.

Q:I removed the faucet assembly from the bathroom sink/basin to replace it with a new one and it's completely yellowed underneath. It's not as bad as it was after I tried to clean it with the rubbing compound I would use on my car but still not gone.I have to get it all cleaned away because the new one is not the same shape at the base as the old one.Anyone here had experience with this and know the best stuff to use?

Chances are its from the pipe dope or plumbers putty that was used. Treat it like a greasy stain and use some baking soda, some cleaner like Greased Lightening or Blue Wolf. You can also try putting some hydrogen peroxide on it over night and covered with a rag or some plastic if its not granite or marble. Should clean up fine then. Good luck!

Q:Three-hole basin and single-hole basin can be installed single hole faucet it

Must not, three holes of the small aperture, single hole aperture.

Q:i try to fix it myself.i can't seem to unscrew that white plastic ring, it was really tight. so what should i do now? should i hire a professional?

You have to unscrew the white rings and pull out the faucet. Clean and dry the water from the sink and faucet. Then put plumber's putty around the bottom of the faucet and reattach it. Make sure it's tight because water leaking from the bottom of the faucet is what's causing the leak. This happens when water splashes in the lavy and around the faucet. That's how the water seeps through. If you can't take off the "white rings," Home Depot sells a plastic nut wrench for about $18, it's made by Rigid. It's the easiest way without breaking the white rings (nuts). Or buy a basin wrench for about $8-$10 for a generic model.

Q:How to install the basin faucet

Deal, the water wakes up your sleeping faucet off, a new life in the day. Here, tell you how to install the basin faucet! Single hole kitchen faucet to buy a single bowl mixer to focus on the nozzle diameter.

Q:How to disassemble the spool?

Knock loose spool, should be able to

Q:Should the faucet be installed on the left or right side of the wash basin?

My father is the new to buy a Shannon faucet, the installation is very convenient, tall enough weight

Q:Basin faucet / basin basin faucet how to choose? What is the basin faucet selection method?

3, the basin faucet selection method: A, look at the appearance: good lead surface chrome plating process is very particular about the general are a few procedures to complete. Distinguish the faucet good or bad depends on the degree of light, the surface of the more smooth and bright, feel no burr, press down the fingerprint will be a long time to spread, indicating that the plating process done carefully. B, turn handle: good leader in the rotation of the handle, the faucet and the switch between the lack of excessive clearance, and open open easily, do not slip. Can not only high-quality faucet gap, a sense of resistance is also large. C, listen to the sound: the leading material is the most bad to distinguish. Good faucet is the overall casting of copper, beat up the sound boring. If the sound is very brittle, it must be stainless steel, the quality will be a bad grade. D, knowledge mark: If it is not resolved, you can choose a little formal brand. General formal products are manufacturers of brand identity, and some non-formal products or some quality of the product is often only paste some paper labels, or even without any mark, buy must be careful.

Q:Basin basin faucet and sink faucet with what brand is better?

My home is made of stainless steel sink and faucet, Oh, with five or six years, and feel very good. Mainly easy to clean, the quality did not have problems.