Q:Can not use it two brick

Acidic silica brick refractory material, has good ability in acid slag erosion

Q:Common bond brick?

When adding ingredients, the amount of lime added shall be converted to CaO, and the amount of addition varies depending on the product, usually fluctuating at 1.5~2.5%. For example, the production of coke oven silica brick, the dosage of CaO is 2.0~3.0%; the production of electric furnace top brick, the dosage of CaO is 1.4~1.75%.

Q:Semisilica brick, clay brick, high alumina brick and what is the difference?

This is a kind of refractory material is divided into three types: semisilica brick (A12O315 ~ 30%), clay brick (A12O330 ~ 48%), high aluminum brick (A12O3>48%).

Q:The specific content is what gb/t2608-2012 brick

The provisions of the brick classification, technical requirements, test methods,

Q:The difference between clay refractory bricks and refractory brick in the application.

Clay brick features good thermal shock resistance and low price, but high temperature performance is not well integrated, and the long-term use temperature is not higher than 1300 degrees. It is widely used in low temperature parts of various kilns.

Q:Brick

An acid refractory consisting mainly of quartz and square quartz and a small amount of residual quartz and glass.More than 94% silica content. True density 2.35g/cm3. With acid resistance, slag erosion performance. Higher high temperature strength. The softening start temperature is 1620~1670 degrees. Long term use at high temperature without deformation. The thermal shock resistance is low (the heat exchange in water is 1~4 times). The natural silica is used as the raw material, and a proper amount of mineralizer is used to promote the transformation of quartz into quartz in the body. Slowly sintered at 1350~1430 DEG C in the reducing atmosphere. When heating up to 1450 degrees, the total volume of 1.5~2.2% expands, and the residual expansion can close the kerf and ensure the airtight and structural strength of the masonry.

Q:Such purpose and scope please give me detailed points thank you

Acid refractory brick is mainly composed of tridymite and cristobalite and quartz and a small amount of residual glass phase.

Q:Physical solid waste disposal

Too much addition will reduce the refractory and mechanical strength, increase porosity, so the amount of waste brick should not be too much.

Q:Common bond brick?

Lime should contain a lot of active CaO, I decompose CaCO3 and MgCO3 not more than 5%, Al2O3+Fe2O3+SiO2 no more than 5%. When the content of large particles, burned Ca-CO3 and over burned lime, the product produced caves, affecting the quality of products.

Q:The high thermal conductivity of silica brick and traditional brick what is the difference?

Tridymite content high thermal conductivity silica brick is 70%, tridymite content of traditional brick is 60%, tridymite content high thermal conductivity of silica brick than tridymite high content of 10% traditional brick,