Seal Seals HNBR Seal HNBR O RING HNBR O SEAL HNBR SEAL HNBR GASKET
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Specifications
Silicone O Ring,Viton O Ring,Rubber O Ring
1.Mould:More 5000
2.Best price and high quality
3.Certificate:ISO9001-2000,TS16969
HNBR O ring. Abbreviation:HNBR Common Name:HNBR Chemical Definition:Hydrogenated AcrylonitrileButadiene General Characteristics:abrasion, compression set, tensiles Durometer-Range (Shore A) :50-90 Tensile Range (P.S.I) :2600 Elongation (Max.%):530 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Good Oil Resistance:Excellent Low Temperature Usage (°F) :-65° to 250° High Temperature Usage (°F) :to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Usual Hardness range:60-80 shore A Usage: Fridge,automobile engine,etc |  |
|
Viton O ring.
Abbreviation :FKM
Common Name :Fluoro Elastomers
ASTM D-2000 classification:HK
Military(Mil-Std417) :MIL=R-25897/MIL-R-83248
Chemical Definition :Fluorinated Hydrocarbon
Durometer-Range (Shore A) :60-90
Tensile Range (P.S.I) :500-2000
Elongation (Max.%) :300
Compression Set:Good
Resilience-Rebound:Fair
Abrasion Resistance:Good
Tear Resistance:Good
Solvent Resistance:Excellent
Oil Resistance:Excellent
Low Temperature Usage (°F:+10° to -10°
High Temperature Usage (°F) :400° to 600° (depending on time and service condition)
Aging Weather- Sunlight:Excellent
Adhesion To Metals:Good
Advantage:
1. Heat resistance up to 600°F
2. Resistance to wide range of oils and solvents; specially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils.
Disadvantage:
1. Not recommended for ketones, low molecular weight esters and nitro containing compounds.
Usage:
Automobile,motorcycle,diesel engine,and fuel system
Silicone O ring. Abbreviation :silicone ASTM D-2000 classification:FC,FE,CE Military(Mil-Std417) :TA Chemical Definition :polysiloxane Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :200-1500 Elongation (Max.%) :700 Compression Set:Good Resilience- Rebound:Good Abrasion Resistance:Fair to poor Tear Resistance:poor Solvent Resistance:poor Oil Resistance:Fair to poor Low Temperature Usage (°F:-60° to -150° High Temperature Usage (°F) :450° Aging Weather- Sunlight:Excellent Adhesion To Metals:Good Advantage: 1.after modulating formula, the tensile strength up to 1500 psi, and tear resistance up to 88 LBS. 2.Good elasticity and good compression deformation. 3.good resistance to neutral solvent. 4.excellent heat resistance. 5.With excellent cold resistance. 6.with excellent resistance to erosion of ozone and oxides . Disadvantage: 1.Does not recommend is suitable for most concentrated solvent, oil, concentrated acid after dilute sodium hydroxide Usage: Appliance:electric kettle,electric iron,Microwave owen,etc
Keypad,heat shock in DVD,cable connector
|  |
| NBR O ring. Abbreviation: NBR Common Name:Buna N, Nitrile, NBR Chemical Definition:Butadiene Acrylonitrile General Characteristics:Waterproof,oilproof Durometer-Range (Shore A):20-95 Tensile Range (P.S.I):200-3000 Elongation (Max.%):600 Compression Set:Good Resilience-Rebound:Good Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Good to Excellent Oil Resistance:Good to Excellent Low Temperature Usage (°F):-30° to - 40° High Temperature Usage (°F):to 250° Aging Weather-Sunlight:Poor Adhesion To Metals:Good to Excellent Usual Hardness range:50-90 shore A Advantage: 1. Has good solvent, oil, water and hydraulic fluid resistance. 2. Good compression set, abrasion resistance and tensile strength. Disadvantage: 1. Not recommended for using in highly polar solvents such as acetone, and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons. Usage: fuel tank, grease-box, hydraulic, gasoline, water, silicone oil, etc |
| EPDM O ring. Abbreviation:EPDM Common Name:EPR, EPT, EPDM ASTM D-2000 classification:CA Military(Mil-Std417) :RS Chemical Definition:Ethylene Propylene Durometer-Range (Shore A) :30-90 Tensile Range (P.S.I) :500-2500 Elongation (Max.%) :600 Compression Set :Good Resilience-Rebound :Good Abrasion Resistance:Good Tear Resistance:Fair Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F) :-20° to 60° High Temperature Usage (°F):to 350° Aging Weather- Sunlight:Excellent Adhesion To Metals:Fair to Good Usual Hardness range:50-90 shore A Usage: Sanitary ware; brake; radiator |
| NR O ring. Abbreviation:NR Common name:Nature Rubber ASTM D-2000 classification:AA Military(Mil-Std417) :RN Chemical Definition :polyisoprene Durometer-Range (Shore A) :20-90 Tensile Range (P.S.I) :500-3500 Elongation (Max.%) :700 Compression Set:Excellent Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Excellent Solvent Resistance:Poor Oil Resistance:Poor Low Temperature Usage (°F:-20° to -60° High Temperature Usage (°F) :to 175° Aging Weather-Sunlight:Poor Adhesion To Metals: Excellent Usual Hardness range:35-80 shore A |
Neoprene O ring. Abbreviation :Neoprene ASTM D-2000 classification:BC,BE Military(Mil-Std417):SC Chemical Definition :polychloroprene Durometer-Range (Shore A) :20-95 Tensile Range (P.S.I) :500-3000 Elongation (Max.%) :600 Compression Set:Good Resilience- Rebound:Excellent Abrasion Resistance:Excellent Tear Resistance:Good Solvent Resistance:Fair Oil Resistance:Fair Low Temperature Usage (°F:+10° to -50° High Temperature Usage (°F) :to 225° Aging Weather- Sunlight:Good Adhesion To Metals:Good to Excellent Usal Hardness range:50-90 shore A |  |
- Q:What are the standards for sealing gaskets? Urgently, hope you sent me in the following or recommend this standard website to me, thank you.
- Gasket standards are the following: to the left to the right, | gasket standard GB/T 4622.1 - 2003 GB/T 4622.2 - Classification of spiral wound gasket 2003 spiral wound gaskets for pipe flanges size GB/T 4622.3 - 1993 GB/T 9126 specifications of spiral wound gaskets for pipe flanges - 2003 non metallic flat gasket size GB/T 9128 - 2003 steel preparation of metallic ring gasket for pipe flange size GB/T 9129 - 2003 non metallic flat gaskets for pipe flanges technical conditions of GB/T 9130 - 1988 steel pipe flange connection metallic ring gasket for technical conditions of GB/T 13403 - 1992 large diameter carbon steel pipe flanges with a gasket GB/T 13404 - 1992 pipe flanges polytetrafluoroethylene envelope gaskets for GB/T 14180 - 1993 winding the type of gasket testing method of GB/T 15601 - 1995 pipe flanges with metal cladding gasket GB/T 19066.1 - 2003 flexible graphite corrugated metal gasket branch GB/T 19066.2 - 2003 flexible graphite metal gaskets for pipe flange gasket size GB/T 19066.3 - 2003 flexible graphite metal gaskets specification GB/T 19675.1 - 2005 pipe flanges with metal punching plate flexible graphite composite gasket size GB/T 19675.2 - 2005 pipe flanges with metal punching plate flexible graphite composite gasket technology JB/T 87 - 1994 pipe flanges for asbestos rubber gaskets for JB/T 88 - 1994 pipeline flanges with metal serrated gasket JB/T 89 - 1994 pipe flange metallic ring gasket for JB/T 90 - 1994 pipe flange Spiralwound gasket for JB/T 6628 - 1993 flexible graphite composite (plate) pad JB/T 8559 - 1997 JB/T 4718 - 1992 metal gasket pipe shell type heat exchanger with metal gasket JB/T 4719 - 1992 for shell and tube heat exchangers gasket
- Q:Is the screw hole is a through hole, to prevent leakage from the screw, need to seal, this seal gasket dimensions with the pad, screw is M8. Who sells it? It's better to send a sample link.
- Use a combination pad; the outside is iron. Inside is similar to the O ring soft plastic, mounted in it, you can go to the hardware store to see.
- Q:As shown in the figure below standard water pressure 0.7Mpa plastic PP products, from the end cover and cylinder body, the use of screw tightening, end seal. Is the O ring reliable, or is the gasket reliable, or any other sealing structure? The end cover needs to be removed and replaced during maintenance
- O ring is generally good. But in your drawing, the sealing ring is easy to damage, and you need to put on the washer. Change the position, in front of the thread.
- Q:Can the metal gasket face seal reach 100MPa?
- The gasket standard is mainly the following: first, the standard GB/T 4622.1 - 2003 gasket spiral wound gasket classification GB/T 4622.2 - 2003 spiral wound gaskets for pipe flanges size GB/T 4622.3 - 1993 GB/T 9126 specifications of spiral wound gaskets for pipe flanges - 2003 non metallic flat gaskets size GB /T 9128 - 2003 steel pipe flanges with metal.
- Q:What material flange gasket is better on the steam pipe?
- Answer four: I think that can be considered the nature of projects, many can choose the type of gasket, metal gasket, asbestos free and can choose the graphite graphite spiral wound, high temperature 520 degrees, non asbestos high temperature of 200 degrees, so the PTFE temperature of 260 degrees, and you choose. But in China there is a civil also has asbestos board, the sealing effect can also. So I think the design should be based on what the design is gasket, what is the gasket?.Answer five: less than 0.7MPa steam pipe operation pressure and temperature are not very high, according to the design requirements can use asbestos gasket, but asbestos gasket and water easily stick to the flange, to replace the cushion cause trouble. It is recommended that you use asbestos coating pads or graphite pads on the asbestos pads, so that gaskets can be easily replaced.
- Q:The outer ball tooth ring sensor mud suede cover gasket what use to send
- Seal upwaterproofdustproofMechanical seal (mechanical seal) is defined by at least a pair of end faces perpendicular to the axis of rotation of the fluid pressure and the elasticity of compensation organizations (or force) the role of the device and auxiliary seal with maintaining relative sliding postmerger and constitutes to prevent fluid leakage.
- Q:Now the general O ring is used moreNon-metallic, non asbestos gasket, paper gasket, rubber gasket, insulation gasket and so on.But I think they're all the same in shapeWho can tell me the difference between the sealing ring and the gasket? Use or something else, thank youI know they are all a general name, and what I want to know is how to distinguish themAnd there's the difference
- For example, belts are divided into A, B, C, D, O belts. In fact, it is used for sealing. Usually you go to the seller's shop and he can help you figure out what you need. Not as good as uncertainty, preferably with drawings or objects in the past to buy.
- Q:Where can I get the golf 7 taillight GASKET?
- The 4S shop or decorating shop. There's something wrong with the car. Ask the car master. 4S shop professional technicians, 10 minutes to solve. ]
- Q:Pictured above, the red circle is directly in the processing of A plane with PTFE gasket compression seal, but always leak, I think it is in the corner due to leakage when processing make fillet PTFE gasket is not very good and fit to face A. Now I want to processing into the structure shown below, put a circle at the corner where the processing tank, which can fit the PTFE gasket A good surface, but also not to experiment, did not know that it is okay, there is no expert advice!The main problems are as follows:First, is this the cause of the leak?Second, A surface in processing, roughness and flatness should be processed to how much more appropriate?Third, how about the tolerance of key dimensions?
- 1, is a form of change, whether can use stainless steel plug screw with PTFE raw material belt canal seal.2, material selection, can choose bulk PTFE, can overcome the roughness of processing
- Q:Silicone rubber gasket can withstand acid and alkali corrosion?
- Silicone rubber has excellent heat resistance, cold resistance, dielectric properties and ozone resistance and ageing resistance properties, outstanding performance of silicone rubber is the use of wide temperature, at -60 DEG C (or lower temperature) to +250 DEG C (or higher temperature) under long-term use.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Seal Seals HNBR Seal HNBR O RING HNBR O SEAL HNBR SEAL HNBR GASKET
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 5000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
