PVC pipe with 110MM, ASTM, AS,BS,ISO, GB

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1000 kg
Supply Capability:
10000 kg/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Specifications

pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.

2.Properties of pvc pipes:

1) Material: pvc pipe unplasticized polyvinyl chloride

2) Standard: GB, ISO9001, ISO14001

3) Color: white  pvc pipe, grey  pvc pipe , etc.

4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55

5) Vicat Softening Temperature, (C)  >=79

6) Longitudinal Reversion, %, 150(C) <=5

7) Dichloromethane Resistance Test: No attack

8) Falling Weight Impact Test, TIR, %, 0(C) <=10

9) Tensile Yield Strength, Mpa >=40

10) Fitness of Water Tightness Test: No Leakage

11) Fitness of Air Tightness Test: No Leakage

3.Features of pvc pipes : 


1)  Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2)  Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.

4.Application of pvc pipes:

1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture

5.Specifications of the pvc pipe:

Outer Diameter (mm)

Wall thickness(mm)

2.5MPA

2.0MPA

1.6MPA

1.25MPA

1.0MPA

0.8MPA

0.63MPA

φ20

20*2.3

20*2.0

φ25

25*2.8

25*2.3

25*2.0

Φ32

32*3.6

32*2.9

32*2.4

32*2.0

Φ40

40*4.5

40*3.7

40*3.0

40*2.4

40*2.0

Φ50

50*5.6

50*4.6

50*3.7

50*3.0

50*2.4

50*2.0

Φ63

63*7.1

63*5.8

63*4.7

63*3.8

63*3.0

63*2.5

63*2.0

Φ75

75*8.4

75*6.9

75*5.6

75*4.5

75*3.6

75*2.9

75*2.3

Φ90

90*10.1

90*8.2

90*6.7

90*5.4

90*4.3

90*3.5

90*2.8

Φ110

110*10.0

110*8.1

110*6.6

110*5.3

110*4.2

110*3.4

110*2.7

Φ125

125*11.4

125*9.2

125*7.4

125*6.0

125*4.8

125*3.9

125*3.1

Φ140

140*12.7

140*10.3

140*8.3

140*6.7

140*5.4

140*4.3

140*3.5

Φ160

160*14.6

160*11.8

160*9.5

160*7.7

160*6.2

160*4.9

160*4.0

Φ180

180*16.4

180*13.3

180*10.7

180*8.6

180*6.9

180*5.5

180*4.4

Φ200

200*18.2

200*14.7

200*11.9

200*9.6

200*7.7

200*6.2

200*4.9

Φ250

250*11.9

250*9.6

250*7.7

250*6.2

Φ315

315*15.0

315*12.1

315*9.7

315*7.7

Φ400

400*19.6

400*15.3

400*12.3

400*9.8

 

6.FAQ

 

Q:What is you MOQ?

A:As customer’s request.

Q:What is the production ability? or delivery time?

A:Our production ability support 40HQ order finish in one week. 

Q:What is the regular shipping port?

A:Tianjin or Shanghai. 

Q:What is your payment?

A:TT or CC. 

Q:Can we have sample?

A:Sample free, freight cost you. 

Q:For urgently doubts,who online?

A:Sales and marketing Manager 24hours online service.

 

 

 

PVC pipe with 110MM, ASTM, AS,BS,ISO, GB

PVC pipe with 110MM, ASTM, AS,BS,ISO, GB

PVC pipe with 110MM, ASTM, AS,BS,ISO, GB

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the commonly used indoor plastic drainage pipes in the market, as well as the advantages and disadvantages?
The application of drainage plastic pipes is simple, and the PVC is usually made of PVC. Its structure is various: core layer foamed pipe, hollow wall tube, spiral tube, core layer foamed spiral pipe, hollow wall spiral pipe.
Q:Why does a dialysis tubing with 25ml of distilled water shrink in a plastic cup with 3/4 of distilled water?
If the tube shrinks, water must be going out of the tube, and this must be occurring because there is a concentration gradient across the tubing. However, both sides start with distilled water, so the water on both sides should have the same (low) amount of dissolved substances. Presumably the shrinkage is occurring over a period of hours or days? My guess would be that something is getting into the water in the cup - this could be dissolved matter from floating dust or bacteria, but more likely are gases from the air. Distilling water would degas it - oxygen, nitrogen, and CO2 would be removed. However, these gases, most significantly CO2, will redissolve in the water if it is left in air (carbon dioxide dissolves to make a solution of carbonic acid). In addition, any contaminants that persisted through the distillation would be concentrated when the cup water evaporates, though this is likely to be a small change due to the high purity of distilled water. You are correct about your second question.
Q:mossberg 500 tube spring sticks on last shell?
The tube will unscrew, but not easily the first time it comes off. When the mag springs in our department Mossbergs get tired, we replace them with Remington 870 mag springs and they seem to hold up better. Field strip the shotgun. Put the end of the mag tube in a vise and clamp down ONLY on the little rectangle on the end of the tube (NEVER on the tube itself). Insert the wooden handle.of your hammer into the receiver as close to the barrel mount as you can. Evenly as possible rotate counterclockwise. Remember, it's not going to come off easily. When it lets go, remove the tube, the follower and the spring. Do not try to just stretch out the spring a little. It won't work. Replace the spring and put the follower back in. put the tube back on the receiver. I find it easier to push the follower into the tube a little until you get the threads started. be careful not to crossthread. tighten it up the same way you took it off.
Q:Where can i get plastic tubing for Drinking hats?
You don't want plastic, you keep replacing them and it's polluting, so buy STAINLESS STEEL. That's what my wish for Christmas. Plus they bend they make holes.
Q:I'm looking for the 12, 16, and 20 plastic flat bottom tubes w/ lids that you see used to make Sandy Candy.
I have no idea, but it is a very specific question... I don't even know what sandy candy is...
Q:what can I do to control the toothpaste for a one way flow to the tube exit orifice?
use a clip that is used for closing off chip bags you just stick that on the end. then as you use the toothpaste you can push the clip up thus stopping the toothpaste from flowing backwards into the end of the tube. and pushing the toothpaste up you. just remember to clip the clip when you do this.
Q:What is the difference between the HDPE pipe and the PE water supply pipe?
The two are tubes of PE, HDPE is HDPE, and PE is polyethylene. But the physical properties are different.High pressure polyethylene (LDPE), the full name of high pressure low density polyethylene, the industry generally referred to as high-pressure.Low pressure polyethylene (HDPE) full name low pressure high density polyethylene, referred to as low pressure.
Q:I want to build a cage out of white/clear plastic tubing. 2" in diameter and 96" in length. ?
The only place I can think of would be an aquarium supply store. It won't be cheap though. You might also be able to find it at a store that sells waste collection set ups for woodworkers.
Q:Intubation due to respiratory infection?
When someone needs to be intubated, they place narrow plastic tube down into their throat, just above the patients lungs. This can be done in respiratory distress. How long the tube stays in place all depends on how sick the patient is. That can be days to weeks. The patient is usually sleeping to help them breath more easily with the ventilator, but if someone is able to remain comftorble, they may allow them to be more awake.
Q:where is the best place to go to buy a plastic tube (the kind you store items in?
Do you mean the clear plastic tubes you put a floor plan and information in when you are selling a house? You can find them at Home Depot or Lowe's with the for sale signs. Other than that one, I know of no other type.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range