Polished Porcelain Tile Natural Stone Serie White Color NS6003/004
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Natural Stone Serie White Color NS6003/004 is one of the most popular color of Natural Stone Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
OEM service could be offered
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Glossiness: 》 85 Degree
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
Why Us:
• More than 9 years tile exporting experience,RMB 200 million sales every year.
• More than 13 years tile factory running-well management experience.
Trade Terms:
• Payment: T/T 50% in advance, balance against copy of T/T,Weston Union, L/C etc.(Payment can be negotiale, kindly to
contact us)
- Q: I hava a 12x12 ceramic tile that we want to hang on the wall (not permanently). The tile has no hooks or anything in it. What‘s the best way to hang it?
- Tape it to the wall using waterproof gasket tape or strong gaffer tape
- Q: Tomorrow I will be laying porcelain tile in my kitchen and need help in figuring out how to cut a hole in the tile for the floor vent? Any input would be appreciated.
- I've done this: I've used an angle grinder to cut a rectangle in one bathroom tile. Straight cuts are easy using an angle cutter and a diamond wheel designed for cutting tile. I've even cut a round hole for the commode. But the commode had a tile seam under it, so I wasn't cutting a hole in the middle of a tile, I was able to cut and nibble away until I had a semi-circle in each tile. Just make sure you have more tile than you need. If (when) you make a mistake you have more to work with. And don't try to accomplish the entire cut all at once. Take little passes at it until you work your way through. Hope this helps. 'av'a g'day mate. '')
- Q: Ok my room has asbestos on the vynil tile floor and it‘s in good condition. I‘m trying to put a carpet on top of the floor is it possible without removing the tile? Home Depot wants me to remove it before they install the carpet.
- I wouldn't remove it. The asbestos in vinyl tile won't hurt you until you start scraping and breaking it up. Just have them install it over the tiles. There should be no problem with that. If the idiots at HD give you a hard time, go somewhere else (which is your best bet from the HD horror stories I've read about online). Note: Asbestos products were used into the mid 70s, so if your house is older than 1960 doesn't mean you don't have asbestos tiles.
- Q: I wish to change the bathroom colour,re-tileing is too expensive so maybe painting the tiles is a option howbest do i prepare for this
- John, I know of no one that has painted over ceramic tile and is satisfied with the results. It's a finish that will not hold up through the constant use of cleaning products. Retiling is honestly the anser. It can be done easily. You'll want to cut through the drywall along the edge of the existing tile aolong the entire perimeter. Remove all the drywall and tile (still adhered to the drywall) in sections. Place cardboard or something that will protect the tub while this process occurs. After that install 1/2' hardi-backer with 1 1/2 screws and install the tile. If you use the 4x4 glazed tile, you can rent a tile cutter for about $15 (or buy one for double that). The tile will cost about $1.40p/sf. Typically you'd need about 70sf of tile (or around $110.00), and 50 pcs of 2x6 cap (about $70) and 2pcs 2x2 corner cap ($4). Grout will run $15. The hardi backer will be $50. Mastic to set tiles will be around $30. An alternative is lay tile over the existing. You will have to remove the existing soap dish to do this.. You save the cost of hardibacker, and some labor. If you do endeavor into this, set the soap dish with the grout, not the mastic. it's a common mistake by DYIers. Use some tape to hold it in place until the grout dries.
- Q: We just bought an old house and the previous owners did a really poor paint job. I scratched off some paint on the tiles in the breakfast nook and the original tile looks really nice. I want to remove the rest of the paint without damaging the tiles.
- paint thinner?
- Q: What‘s the difference between tile mastic tile adhesive? I was told to paint the wall w/paint primer first then use tile adhesive rather than tile mastic to apply tiles on damaged green board around my jaccuzzi tub for a quick fix. The green paper peeled off when removing the old tile exposing the brown cardboard stuff.
- Mastic Tile Adhesive
- Q: I purchased a house that came with a pool. The drawback is that tile is covering the outside of the pool which makes it extremely slippery for my family and guests. What a good solution to this challenge? Lastly, what‘s going to be the best and cheapest alternative to this? Someone mentioned to me that the rubbery mats they use at restaurants works very well, but I need to know the best and cheapest alternative.Suggestions?
- The answer is wary simple; you have the lethal combination of two things that almost invariably will result in an accident: slick tiles and water. When a tile surface gets wet, the coefficient of friction decreases. This is a fancy way of saying that wet tiles do not provide the same traction as dry tiles. When a person walks across a floor and suddenly steps on a wet spot, it’s usually too late to prevent the accident. This probably is a good time to state what is obvious: The best time to prevent slip fall accident is before they happen! But is this possible? Yes. Anti Slip Protection Company produces exactly what you need to prevent slipping on slippery swimming pool deck.
- Q: What are the advantages of Marco Polo Tiles? How to choose the tiles?
- You can go to CityTogo to see the above Marco Polo tiles it From the appearance point of view, the color should be uniform, surface finish and flatness is better, the other can be identified by the sound, with a hard light flick, the sound more crisp, the higher the degree of porcelain, the better quality. Or can use water droplets in the back of the tile, see the water spread after the infiltration of the speed, the slower the water, indicating that the greater the density of the tile, on the contrary, that the density of sparse, its inherent quality than the former is excellent. In addition, from its hardness point of view, with the tile pieces of the edges and corners scratched each other to see broken fragments broken, if it is fine, hard, or leave scratches rather than loose, soft, or left scattered powder, It is good quality. These are common sense
- Q: Jane marble tiles how to join
- 1, Jane tiles are high-grade tiles, each place is only allowed to have a total dealer, that is, if someone agent, then you can not be a proxy. 2, Jane does not need the initial fee, but you need to be able to invest at least a 300 square store, pre-investment, it is still more than 600,000 it 3, wish business is booming, made a fortune!
- Q: I‘m having linoleum put in my kitchen and I‘m want to prep the floor. We already tore the carpet up and we weren‘t sure if we should clean the carpet adhesive off the ceramic tiles, or remove the tiles from the concrete.
- You are better off ripping out the tiles first. If you really want to lay the hardwood over the tiles, first lay down 3/4 plywood so you have something to staple the new floor to. The ply is glued down with PL, and then screwed into the tiles/sub floor. You will need to pre drill with a masonary bit, and screw in every 12 inches. Seems like more work than ripping the tiles out. And adds an extra 3/4 + tile height + hardwood - how will that transition to other rooms for other information you can check my source site
Send your message to us
Polished Porcelain Tile Natural Stone Serie White Color NS6003/004
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
