Detailed Product Description of Plastic Injection Machine (PX200V)
high quality,high efficiency and energy saving and offer best service as usual in return for users' supports.
Energy-saving, Environmental Protecting, Low noise
Using high response variable pump as standard equipment can save energy 30~50%. The machine is three-dimensional design, adopted with high quality sealed component ensuring excellent sealing performance, and adopted with imported high quality hydraulic vittas and pipelines of optimized design ensuring stable operation and low noise. Injection molding machine with servo pump of energy saving 30~80% is optional for customers.
Excellent parameters of performance
The parameters of performance are prior to the domestic machines in the same grade. We can design and produce injection molding machine of high speed, synchronization and ultra precision.
High rigidity, efficiency, precision for the whole machine
It is adopted with Finite Element Analysis in design of the whole machine. Finite Element Analysis is applied to all parts bearing stress, with high safety factors, low deformation and long using life circle. The toggles are optimized by high-tech movement analysis software ensuring speedy and stable operation for the machine. It can be molding in a short circle with high quality of products. The machine of high rigidity equipped with linear transducer of high precision controlling the position and high response imported hydraulic valve equipped with high precision computer can be apply to high precision products. Ultra injection molding machine can be specially provided.
Optimized structure for Plastic Injection Machine (PX200V)
The machine with optimized structure, three-dimensional design and high standardization ensures low malfunction rate.
Using special computer with large screen, online function and temperature linearity track, it can be controlled with high precision, calculated with high speed and multi-function.
Parameters for Plastic Injection Machine (PX200V)
Theoretical Shot Volume
Actual Shot Weight (PS)
Screw L:D ratio
Space Between Tie Bars
Mold Thickness (Min. Max.)
Hydraulic Ejection Stroke
Hydraulic Ejection Force
No. of Ejector
Hydraulic System Pressure
No. of Temp Control Zones
Dry Cycle Time
Machine Dimension (LxWxH)
Machine Weight (Dry)
- Q:What are the types of injection molding machines?
- As the structure and types of injection molding products are relatively large, the injection molding machine used for molding injection products is also more.
- Q:Injection molding machine barrel temperature is not very high at normal and low temperature line is very tight no problem
- The temperature is directly proportional to the resistance, the temperature, the line resistance, and the temperature of your line!
- Q:Debugging and debugging process of injection molding machine
- (3) finished mold;Fault reason handling methodThe filling is too low to reduce the discharge pressure, time, speed, and the amount of injectionThe injection pressure is too high to reduce the injection pressureExcessive injection of glue reduces the amount of injectionThe injection time is too long to reduce the time between the shotsThe temperature is too high to reduce the temperature of materialUneven feeding, partial fullness, change of overflow size or positionThe mold temperature is too high or too low to adjust the mold temperature and the relative temperature at both sidesDie release, chamfering, repair die, remove chamferThe mold surface is not smooth, grinding dieDemoulding causes vacuum mold opening or ejection slowing down or mold adding air intake equipmentThe injection cycle is too short to increase coolingMold release is insufficient, slightly increase the amount of mold release agent(4) die for runner (nozzle);Fault reason handling methodThe injection pressure is too high to reduce the injection pressurePlastic temperature is too high to reduce plastic temperatureThe sprue is too big to change the moldThe sprue cooling is not enough to prolong the cooling time or lower the cooling temperatureThe sprue release angle is not enough to modify the mold to increase the angleThe sprue bushing is not in alignment with the nozzle to readjust its fitThe inner surface of the sprue is not only or has the mold of demoulding and chamferingPouring hole mold repair damaged roadNo sprue catch pinThe filling is too rich to reduce the amount of injection, time and speedMold release is insufficient, slightly increase the amount of mold release agent
- Q:What should nitrogen gas injection pay attention to?
- 1. the operator must undergo good safety education.2. operate strictly according to the operating rules of equipment.3., when the valve operation, wear protective equipment: masks, gloves, etc., to prevent frostbite.4. check the safety valve and pressure gauge once a year, check the riot film every two years, check and record the records.5. when the nitrogen emissions, people should stay away from the drain, otherwise, long time suffocate easily.6. in the obvious place to hang around the nitrogen tank "trespassers", "dangerous" and other warning signs.7. freezing on nitrogen pipe, no heavy blow.8. check the nitrogen tank every day and find the problem in time.9. always keep the nitrogen tank clean and free of oil and grease.10. equipment should be cut off for a long time without gas.
- Q:The injection molding machine does not store the material to do so,
- The storage pressure is too small2. back pressure is too large, leading to the screw can not relax3. hydraulic system pressure relief4. melt temperature is too low5., melt motor power is too small, or the motor pressure is serious.6. screw barrel and raw materials do not match7., the material is not normal More injection molding machine screw knowledge inquiries, Baidu search: "Jin Xin * screw", "Shenzhen Jin Xin * screw" for you to answer! Hope to adopt!
- Q:Injection molding machine produced inside the product,
- First of all, we should first analyze where this gas comes from, and how to prevent and reduce the generation of gas.First, when the particles melt in the screw, it will produce smoke. Second, the mold cavity itself contains air, at the time of injection if the air line out will be wrapped into the material to. Third, the moisture in the material produces water vapor at high temperature. (do not think that the drying temperature and time are enough, it must be dry, and wet weather will not be dried by ordinary dryers)From these three directions to improve, first, reduce the material temperature (reduce the production of smoke). Two, slow down the injection rate (which is good for the exhaust gas). Three increase mold temperature (improve material flow due to lower material speed). Four, fully guarantee the drying of materials (PC and PA66 moisture content must be less than 0.03%). Five, the mold into the glue point to enlarge (conducive to the actual effect of packing). Six, the increase in back pressure (effectively increase the density of the material). Seven, the mold exhaust should be guaranteed.From the above points by item examination and improvement, the problem will certainly be solved.In addition, just look at the picture, playing this bubble, the process must be a problem.
- Q:What does injection mean?
- Heel cast steel. The cast iron is about the same,,
- Q:What is I/O on an injection molding machine?
- I means "IN", and "O" means "OUT.", that is "input" and "output"
- Q:4 160T injection molding machine, how much cooling tower should be equipped with?
- In general we 160T mold, pipe size of 16MM-20MM in diameter, but in general we pump flow rate Straw at 2 m / S (injection cooling water is recycled, water pump Straw flow is the decision point need air conditioning cooling tower), so we can assume that the size of pipe diameter is 20MM, the water flow rate of 2 meters so every hour per second; each injection molding machine needs the amount of water:PI (0.01 meters) * (0.01 meters) *2 M / s *3600 s =2.26 cubic metersYou do this, and here you should be clear! In addition, individuals feel that there is still need to consider whether the subsequent expansion of production, that is, increase the number of injection molding machine, so personally feel that the need to reserve space as well!
- Q:What kind of metal material is the nozzle head of injection molding machine?
- The injection nozzle of the injection molding machine has alloy common nitriding material
We are engaged in mechanical and electrical integration products' research, development, production, sales and service companies. Its main products are injection molding machines, CNC, EDM, wire cutting.
1. Manufacturer Overview
|Annual Output Value
||CERTIFICATE OF COMPLIANCE
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||51% - 60%
|No.of Employees in Trade Department
||English, Chinese, Japanese
|No. of Production Lines
|Product Price Range