GLAZED TILE-CMAX-600806
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 M2 Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of Our Glazed Porcelain Tile :
800*800 full glazed porcelain tile
Specifications of Our Glazed Porcelain Tile:
.Absorption rate:<0.5%
.Size:800x800mm
.Grade AAA
.CE&ISO9001
Features of Our Glazed Porcelain Tile:
1.Superfine powder twice hedging penetration imitates"pearl"effects and has a kind of flowing effect.
2.The waving of tiny lines randomly spreads together with powder flowing field form natural petaline"pearl"effect.
3.Mulit-pipe ground color and multi-pipe grains combine;superfine powder multiple soft spreading creates natural piled up grains that are clear in gradation with strong 3D effects.
4.Adopts a kind of top stain-resisting technology,to form a special dense protective layer on tile surface and effectively fill the pores left after polishing and penetrate into tile body to closely integrate with tile body,thus put an end to any super stains from penetrating in.
Test Report of Our Glazed Porcelain Tile:
TEST REPORT | ||||||
Item | Inspection Item | Unit | Provision of Standard | Test Result | Judgement | |
1
| SIDE | The deviation ,in percent of the average side for each tile from the work size. | mm | ±1.0 | +1.0 | Pass |
The deviation ,in percent of the average side for each tiel from the average size of the 10 test speciment . | % | ±0.4 | +0.01 | Pass | ||
Thickness | % | ±5 | +4.21 | Pass | ||
Straightness of sides | % | ±0.2 | +0.06 | |||
Rectangularity | % | ±0.2 | +0.05 | Pass | ||
Center curvature | % | ±0.2 | +0.05 | Pass | ||
Surfaceflatness | Edge Curvature | % | ±0.2 | +0.05 | Pass | |
Warpage | % | ±0.2 | +0.08 | Pass | ||
2 | Surface quality | / | A minimum of 95% of the tiles shall be free from visible defects that could impair the appearance of a major area of tiles | Pass | Pass | |
3 | Water Absorption(E) | Average value | ≤ 0.5 | ≤ 0.3 | Pass | |
Individual value | ≤ 0.6 | ≤ 0.5 | Pass | |||
4 | Breaking strenghth | N | Thickness ≥ 7.5mm,not less than 1300N | 2187.3 | Pass | |
5 | Modulus of Rupture | Average value | Mpa | 48.1 | Pass | |
Individual value | Mpa | 46.1 | Pass | |||
6 | Thermal shock resustance | / | Test method availuble after 10 times testing | Pass | Pass | |
7 | Mark(On the package) | Manufacturer logo or/and Origin | Pass | Pass | ||
Quality mark | Pass | Pass | ||||
surfacecharacter ,GL OR UGL | Pass | Pass | ||||
8 | lra | ≤ 0.5 | Pass | Pass |
Transportation of Our Glazed Porcelain Tile:
- Q:Currently the stairs are carpeted. I have heard that if this is not done properly the tiles will crack. How do I ensure that the stairs are level and stable enough for the tiles? Any guidance is greatly appreciated.
- this is a really risky thing here not to mention costly. you would have to make some type of wonder board on your stairs. if you are not working with an open stairwell above and below it is really going to be quite a messy, costly job that may or may not even come out the way you want it. Just as a suggestion i wanted something different looking too i took glass rocks and glue them all the way up on the sides. it came out beautiful but it was a helluva job itself to complete. it still gave it the unusual look and everyone who sees it comments on it and likes it personally, i would rethink the tile ON the stairs thing.
- Q:The tile is attached to sheetrock and I don‘t want to damage the sheetrock by ripping off the old tile.
- your better off ripping the old tile off, if you rip the bottom of the sheetrock off you should cover it with trim besides trim will make the tiles stand out more
- Q:Things fade on the tiles how to get rid of
- Very polluted for all-round water cleaning Daily cleaning of household cleaning or detergent cleaning Removal of oil tiles daily cleaning optional detergent, soap and other cleaning. Add a little mixture of ammonia and turpentine soap, cleaning tiles can make the tiles more shiny. Polished tiles should be regularly waxing treatment, the time interval of 2-3 months is appropriate. Brick noodles, such as scratches, can be applied in the scratches toothpaste, wipe with a dry cloth can be repaired. Brick and brick cracks can be used from time to time with dirt to remove dirt, and then in the gap brush a layer of waterproofing agent, can mold growth. Tea, coffee, beer, ice cream, grease and other pollutants using sodium hydroxide or potassium bicarbonate solution. Ink, cement and other pollutants such as hydrochloric acid, nitric acid and other dilute solution. Paint, paint and other pollutants use special cleaning agent. A variety of plastic can be used to remove the banana water, pure banana water is colorless transparent volatile liquid, a strong smell of banana, slightly soluble in water, soluble in a variety of organic solvents, flammable, mainly used as paint And thinner.
- Q:newly installed ceramic tiles did not adhere to the tile adhesive
- were they walked on before they dried? .. or maybe the thinset wasnt put down thick enough to make a good bed or mixed incorrectly .. all i can think of .. sounds like a mess ..
- Q:I just finished grouting my tile yesterday I want to remove the haze with vinager should I let the grout cure for three days,then seal it and then scrub the whole floor including going over the grout lines (which would be then sealed) scrubbing with a sponge and avoiding the non cured grout is working but is taking far too long
- Know what works best? Don't use any moisture at all to remove haze--You'll have to do it 2 or 3 times to totally remove the haze. Let the haze dry on the tile, then polish it off with a dry soft terry cloth--It may create a little dust in the air, but it works really well. Also, wait about a month or so before sealing your grout lines.
- Q:I am installing 13x13 porcelain tile on a wall. Should I leave a 1/4‘‘ gap for grout or can I butt them up tight for a smaller grout line?
- You can buy plastic spacers from tile shops in various sizes, In the shop I would place a meter of tiles on the floor and use some spacers to get the look you like. Then you know what space to leave for grout.
- Q:Why the new tiles are double? What material, so good?
- It is not Yeah, Hongyu tiles on all the whole body bricks, all a layer, so that the selection of more detailed, with a higher specification, the quality is so more stable
- Q:My husband and I are building a small rectangular pool and want to add some mosaic tile designs on the floor of the pool. Is there a good website that explains how this should be done or can anyone share some advice on pool bottom tile work? Is this going to be easy to do or something to leave to the professionals?
- Best to have the bottom of the pool smooth concrete because some things will grow in small lines or cracks of tile. Use tile as a ring at the water level or above it. Ask around there is a reason that pool bottoms are smooth.
- Q:How can I remove ceramic tiles from a bathroom wall without damage the wall itself, as I want to paint the wall. Would steam help loosen the glue used?
- Ceramic Tile For Bathroom Walls
- Q:Immediately home decoration, and now consider the floor, but they do not understand anything, so would like to ask about what the advantages of the two? How much can the cost be?
- Ordinary price wrong is not too much ordinary wood flooring for a long time easy to deformation and decay but the tiles will not be and can also effect
1. Manufacturer Overview |
|
---|---|
Location | Guangdong, China |
Year Established | 2005 |
Annual Output Value | Above US$ 90 Million |
Main Markets | 8.00% Mid East 15.00% Northern Europe 15.00% North America 12.00% Eastern Asia 10.00% Africa 9.00% Eastern Europe 20.00% Southeast Asia 4.00% Oceania 3.00% Western Europe 2.00% Southern Europe Mid East; Eastern Europe; North America |
Company Certifications | ISO 9001:2008;CCC,CE |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Foshan,China |
Export Percentage | 41% - 50% |
No.of Employees in Trade Department | 20-30 People |
Language Spoken: | English; Chinese; Spanish |
b)Factory Information | |
Factory Size: | Above 100,000 square meters |
No. of Production Lines | Above 10 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | High; Average |
Send your message to us
GLAZED TILE-CMAX-600806
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1 x 20' FCL m²
- Supply Capability:
- 100000 M2 Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords