Glazed Porcelain Tile Gris Series GR60A/60B
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Glazed Porcelain Tile Gris Series GR60A/60B is one of the most popular color of Glazed Porcelain Tile Serie, which is one serie of Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas.
Product Features
Glazed Porcelain Tile,
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
4. Why choose our Floor Tile?
1). Less investment and shorter lead time because we ship tiles directly from Factory.
2). Better ETD and more stable price bacause we keep abundant stock for future needs.
3). Experienced service because we have an experienced team and we could send our experienced engineer for guving useful instruction on your jobsite.
4). Better warranty of products because we enjoy a reputation and we have got varies certificates and awards for our products.
5. How to choose bathroom tiles? Porcelain tiles or glazed tiles?
Currently used in the bathroom tiles with glazed tiles (mainly from price considerations, some high-end can choose tiles, notice to choose tiles), divided into Shinny and Matt two kinds. Light color makes people feel shinny, but the bathroom more appropriate to create a warm feeling, so the best choose is uses matte, the shinny feels more soft and not dazzling.
- Q: I went and removed 3 ft of tiles from the side of the bath tub starting at the bottom. The tiles had the cement on it so it came off the wall exposing the wood the to the house and i saw the water damage to the wood. How do i patch up the wall? Do I use plywood and than cement it and than add the new tiles?
- If I understand the problem correctly, it sounds like you have water damage inside you wall. You first need to find out what caused that damage. If you repair the wall without finding the water leak, it will happen again. If the area was dry rot and it didn't sem like there was currently water there, then it is likely safe to fix. Carefully remove tiles until you no longer see any water damage to the wood. I'm not sure what wood is there. If its plywood, replace it with a like thickness (most of the time today, they use drywall, but its a special kind that is usually green that's made for bathrooms and moist areas). Before replacing the tiles, clean them up and remove any old grout from the edges. Be careful as the tile are very brittle and break easy. There are a number of bathroom tile type caulks that can adhere the tile to the wood. I suggest going to somewhere like Lowe's or Home Depot or a similar store and ask someone in the plumbing dept or the paint dept what kind of caulk to use to attach tile to wood. Apply the tile to the wall using the caulk. Now you need to re-grout the seams. Buy grout and apply it in all the seams. Let it completely dry (read the box but most say at least 24 to 48 hrs to completely cure) then after its cured, apply grout sealer over the top of the grout seams.
- Q: I have ceramic tile throughout home and in kitchen around one tile the grout or whatever the stuff is between the tile has crumbled and is getting bigger. Can i seal it myself,with what? or do i need to hire a stud to fix it?
- Go to local hardware store and ask for grout repair.
- Q: Real estate tiles where the tiles as Guangzhou? What are the consequences if the wall is not good?
- It is recommended to go to the building materials market to see, choose the brand of tiles also try to choose a large brand, quality guaranteed. But also their own hands to test the quality. Do it yourself
- Q: We are looking to buy a house and we‘re choosing between tile and hardwood floor. I prefer hardwood because I feel its easier to clean and more comfortable. Husband prefers the tile. Is it just personal preference or is one better than another, cleaning wise.
- Pros and Cons: 1)Porcelaine and ceramic tile are harder and will wear better with sand and water. However, you have grout to deal with (seal it and use the right cleaners and that wont be a big con) 2) Wood is beautiful and warm. It can warp with moisture, and scratch, especially with sand. Of course durability should be an issue, and it really depends on how much sand you will track in, and how much moisture will be on the floor. They do make some tiles that look like wood. One that is really nice is Interceramic's Timberland series. That might be a nice compromise.
- Q: I have a rental that currently has sheet vinyl in the kitchen that is in bad shape. I am considering putting in self adhesive floor tiles over the vinyl. I have installed similar flooring in a bathroom but used inexpensive tiles. It looked good, but the tiles tended to slide. I‘m thinking it was because I used bargain tiles rather than better quality.I just need comments as to longevity and problems you might have encoutered with self adhesive tiles. Also, do you have any particular brand or type you recommend?
- I have numerous rental properties that I use peel and stick tiles in with good success. I get them at Lowe's usually and I spend about a buck a tile. Never had any problems with them other than if the floor gets to wet for extended periods of time the tiles will pop up. best remedy for that is a small tub of vinyl tile adhesive and a small notched trowel, put a little glue on the back of the tile that pops and stick it back down. as far as longevity, I have floors that I have put down more than 5 years ago and they still look as good as the day they were done. Pay attention to how thick the tiles are. The thin, cheap tiles are just that, thin and cheap. The tiles I get from Lowe's I'm not sure who the manufacturer is but they are called Eurostone, they look like marble more or less. If the vinyl on your floor is in good shape and sticking good you can go right over that, if not you may have to put down luan on go over that.
- Q: I am installing 13x13 porcelain tile on a wall. Should I leave a 1/4‘‘ gap for grout or can I butt them up tight for a smaller grout line?
- large tiles (13x13) usually require at least a 3/8 space. you can butt up the tile but ive seen this done and it does look awkward .
- Q: We have recently had our bathroom refitted, and tiled floor to ceiling with large ceramic tiles in a brick pattern. However now finished it is obvious that they are uneven. The tiler said it is the tiles. Is this likely or is it just a bodged job - he re-platerboarded the walls prior to tiling so they should be flat?
- From what I understand, I'd install either waterproof drywall or regular which you can then seal. You can shim the drywall out where the gap is with furring strips. This will give you a straight surface to put your tile on. This assumes the drywall butts into a corner. You can't put tile on an uneven surface as it just magnifies the unevenness. You might be able to put a molding on to cover the gap. That sounds the easiest and cheapest. Take a picture and show it to some one at a tile store or at a hardware store and they might be able to help.
- Q: all ceraminc tiles, mounted in between to tiles maybe?
- The shelf could only appear to have been made from tile. The tiles are mounted on a subframe, covered with cementitious board and adhered with mortar, typically. With new construction (or major remodel), this is pretty straightforward; you'd just plan it in to the framing and finishing. With an existing shower, I'd have to say No, to this thought, because there'd be nothing to mount the tiles properly to. If you do get that far, you can get tiles with a specially shaped edge, called a bullnose that won't show the underside of the tile's body (an unglazed edge) for the edges of a surface, like a shelf. Grout can also be used to hide those 90 degree angles, if the bullnose tiles are not made to match the tile you are working with. Hope that helps/
- Q: What is the probability that the two faulty tiles share an edge?
- Break down the titles into 3 categories: - Corner tiles (there are 4) - Outer tiles that aren't corner tiles (there are 6*4=24) - The rest, on the inside (there are 6*6 = 36) If a tile is on a corner, there are only 2 possible other squares in the grid that it can share an edge with. If the tile is in the second category, there are 3. And if the tile is somewhere in the middle, there are 4 neighboring tiles it could share an edge with. The total probability that two random tiles share an edge is: ( P(tile is a corner tile)*(2/63) + P(tile is on end)*(3/63) + P(tile is in middle)*(4/63) ) / 2. We have to divide by 2 because we're counting each pair twice. So this is: ((4/64)(2/63) + (24/64)(3/63) + (36/64)(4/63)) / 2 = (8 + 72 + 144) / 2(64*63) = 112/4032 = 0.027777... EDIT: Right after I first posted this I noticed that the user above me got the same answer unsing a different method. I like his method better, but it would seem to be that the total number of unique pairs on the grid is not 64*63, but 64*63/2 because there are two different ways you can pick tiles to make the same pair (depends on which order you pick them in). So maybe the answer is 112 / 2016 and I missed something in my reasoning!
- Q: Dont worry about looks with the dollar tile just want to know pricing pretty much on the tile and how expensive it is.
- If you are doing the tile work yourself, it will be cheaper than having one of those fiberglass shower enclosures put in. You are looking at the cost of tile (at $1/sqft.), grout ($10 or less), permabase/durock ($9 per 3x5 sheet), mastic ($30 for high quality), and caulk ($4), to get the job done. On an average size shower, this will bring your total material bill in at right around $200. This is based on entirely ripping out your old shower walls (back to the studs), and building an entirely new shower. A complete rennovation for $200. This is what I do for a living, and I can honestly tell you that you will save tons if you are handy enough to do this yourself. One side note on the pre-fab showers (fiberglass, urethane, etc) - we get a lot of calls to come out and remove mold from these types of enclosures. On most that I've seen there are a lot of corners and small nooks that moisture gathers up and sits in. Just something to watch out for should you go that method. Good luck to you, either way.
Send your message to us
Glazed Porcelain Tile Gris Series GR60A/60B
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
