Full Polished Glazed Porcelain Tile 600 YDL6BB358
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Polished Porcelain Tile Crystal Jade Serie White Color CMAX26601 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Made in Foshan, China.
First choice,grade AAA
Water absorption<0.5%.
Polishing Glazed porcelain tile .
Surface:Innovative way to video output glaze sprayed on the tile surface
Technology:Latest high-tech Digital silk Printing equipment
Usage: wall and floor decoration expecially kitchens ,bathrooms and other area where scratch , stain and water resistance is a must.
function: Acid-Resistant, Heat Insulation, Waterproof.
High-level glossiness, self-cleaning and stain-resisting.
We have different colors and different design in this series.
Environmental friendly production.
Presents Luxury and Beauty.
The best product with the most competitive price.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
- Q: I have a bunch of bottle caps and I thought it might be cool to encase them in some type of clear material so I could use them for tiles in my shower. Is it even possible to do that?
- If you have a tile size , sure make the mold just a hair smaller than the tile. Same if your just replacing a few and making the bottle cap tile as a deco tile. Just use a white thin set and completely smooth coat over the back so you see a all white back ground through your deco.. The use of a extra modified thin set is required because this wouldn t be much different than setting glass tiles. GL
- Q: 1 package tiles can paste the number of square brick
- First of all need to know how many kilograms of tiles you said? If it is 20 kg, then the wall flatness is better, the error in the case of plus or minus 5 mm, probably can do 4 square or so, if the flatness is not good, about 2 square or so. If it is 25 kg installed, then flatness can be about 5 square or so, flatness is not good about 3 square or so, the specific need to understand the base flatness can accurately estimate the consumption.
- Q: i wanted to make a moseque out of ordiniary household tiles i have left over from small jobs around the house. can this be done and is it safe?
- extremely tough subject look using search engines like google that will could help
- Q: I have never laid tiles before and I would like to work from the ceiling down. In the shower I am going to use thin set. the rest of the bathroom is green board. which I intended to use a tile adhesive.the reason I wanted to go from ceiling down is I think the layout will look better
- The best way to lay it would... measure from floor to ceiling lets say that its 8 ft. if the tile you are using is 12in then you know that you wild need 8 tiles from floor to ceiling. but you have to add 1/4in gap in the tile or what ever size gap you pick. so with 8 tiles 12ins plus 8 gaps (not counting the top and bottom gaps) you will have an extra 2ins that you have to figure for. It would look really bad if you had to cut the top tile to fit cutting the bottom tile will look much nicer. So the best way to do it is use a spinning laser level to find 2 ins off the floor and mark with black lines. Use nails to hold up your til to that line. Start laying the tile up form that line. Uses spacers to get the gap you would like. side note is that tiles are not all 12 by 12ins some can be as much as 1/4 bigger or smaller than that so if you get a tile like that use a nail instead of a spacer to fit the gap so all the tile are even. your eyes won't see a thiner gap but they will see tiles that aren't even. once you get to the top adjust the spaces to make all the tile nice and even at the top. once your done and the thin set is dry remove the nails holding the bottom tile in place and cut the bottom tile to the size you need. you can't really use the floor as a guild goin up cuz most bathroom floors are slopped and some sides are Higher that others and that will mess you up in you start from the floor up. hope this helps
- Q: I would like to install laminated flooring in my kitchen. Two of the wall are tiled. Is it possible to undercut these tiles or is there an easier method to do a neat installation?
- DO NOT cut the tile. You will crack, chip and split, and potentially ruin much of the tile work. Then you are stuck with a much larger issue. The solution is simple. Lay the laminate right up to the tile. Use quarter round molding (small). If you use wood, paint it to match the tile, floor, or simply paint it an accent color. The molding can be glued into place, thus relieving you of further issues and making the transition beautiful between floor and wall. Tile may also be glued, or use mastic, to place. Then grout. This is, however, a much more expensive option. But, to prevent a potential disaster, it is worth it. The other, simpler resolution, is to lay the tile right up to the tile and seal between floor and wall with a washable silicon. Write to me if you have any questions.
- Q: How to seal new Porcelin Tile
- Porcelain tile is not porous so sealing is not recommended and can make it slippery like a sheet of ice...You can seal the grout in between though.
- Q: I am tiling my bathroom and in the process of re-tiling the shower stall. I removed the old plastic liner there and now some of the glue remains on the greenboard. Also, some of the green part of the board is ripped of from when the glue came off with the old liner. Some of the paper is flakey in spots. I pulled off some of the loose pieces, but there is more. Now, I‘m an amateur. I was told to use some grout sealer to go over the greenboard. However, since there are flakey pieces of paper from the greenboard on there still, should I simply remove as much as I can before sealing and tiling? Will the seal glue these flakey pieces down and make them secure for tiling? What is your advice? Many thanks!
- I have to agree with answer 1. I tile every day of my life, and while greenboard certainly should be used for the balance of a bathroom, I stopped using it around tubs and showers, years ago. Concrete backer board is an industry standard, is not more difficult to install, and actually aids in tile/mortar adhesion properties. While you have the walls gutted, you might add a vapor barrier as well. The issue with patching over the damage is that it may become just as degraded as the original substrate, and I suspect cause you to be unhappy. Steven Wolf Just my two sense
- Q: We want to put the same sticky tile over the existing tile just stagger them. Will that be unstable or should we remove the old ones...which seems like work lol
- AS long as the old is stuck well, flat, clean of wax, should be fine . Good Luck
- Q: I want to install tile over laminate. How do I do this?
- Do not lay Ceramic tile over the laminatee floor, you must remove the laminat and get to the sub-floor and remove it then put down sheets of durarock on the floor joist. If you are laying it on a concrete floor you must still pull the laminate up and have a clean level surface so the mortar will bond. If you don't remove the laminatee your tile will float on the laminat. Hope this helps.
- Q: Suggestions and stories needed. We have 3 kids, 2 dogs (inside). I am on the fence. We bought stuff for doing the tile but now I am thinking laminate.
- Both are good choices. Tile is more durable but its cold in the winter and harder on the feet. Laminate has a warmer feel and the pad gives it a little bit softer feel. Plus glass objects don't always break when you dop them on it. But it can be damaged a lot easier than tile. I am not saying its easily damaged, by no means, its very durable and will with stand 3 kids and 2 dogs. Laminate is also not recommended in high moister areas. As far as maintaining the floors, Laminate is easier just wipe it up a few times a month and your good to go. Tile needs the grout to be sealed and needs to be scrubbed when t gets real dirty.
Send your message to us
Full Polished Glazed Porcelain Tile 600 YDL6BB358
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
