Full Polished Glazed Porcelain Tile 600 YDL6BB260
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile 600 YDL6BB260 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
- Q:Over time the tiles in my apartment bathtub have turned yellow. It‘s not all of the tiles, just a few in the back/corner. I undoubtedly have hard water but I can‘t figure out why a few of these tiles are yellow. As far as I can tell, these are cheap plastic tiles (white). I have tried comet (with bleach), full strength bleach, vinegar/water solution, vinegar/baking soda, baking soda by itself, mr. clean magic eraser, and full strength CLR to no avail. The only thing that worked at all was using comet and scouring the tiles with steel wool. Although it scratched the surface, the actual scratch part wasn‘t noticeable. But there has to be an easier way than breaking my arm to get one tile cleaned. Any suggestions? If anyone wants I can email them a picture of the tiles.
- Anything you've used that has already scratched the tiles will only result in hard water deposits clinging to them again, as the glaze has been compromised. CLR full strength is really the only thing that works that won't damage the tiles although it requires repeated treatments to clean them. Take an extra fine media abrasive (0000), mix a 50/50 solution of a product called Barkeeper's Friend and CLR and try this. You may have to treat it several times but the hard water scale should dissolve without damaging the tiles. I've heard of mixing a solution of scratchless cleaning powder and kerosene, but you don't want to apply that to plastic and you don't want to use VOCs (Volatile Organic Compounds) in confined spaces. A better solution would be to break out all the plastic tile and have it replaced with ceramics, but since you're renting and your landlord probably doesn't want to spend money on remodeling this is your best bet.
- Q:anyone know this kind of tile?How durable is it? is it suitable for wall or floor?
- If its the honey or green onyx in the lower pictures, to answer your question, it is for wall application only, not durable enough for flooring. Expensive but can be used with other tile if you d like to make stripes and small designs. Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q:How can you cover ugly wall tiles??
- The best way is to have them refinished (if they're ceramic). You can have a contractor do this or there are kits available to accomplish this as well. Similar to refinishing a bathtub.
- Q:i have vinyl tile in my dinning room(high traffic) its new but its not brillant ,and i saw a mantenance guy last night in wallmart using a buffer machine to pollish the tile..my question what kind of pad the used?they use any quimical with this pad?..how often this treatment its needed?
- it was a buffer pad used after wax was applied and let dry on a clean floor
- Q:I‘m looking to replace a ceramic tile floor in my kitchen with a different style ceramic tile. The contractor says I have two options. He can either lay the new ceramic tile on the old, which will be cheaper than bringing up the old tile but then the floor will be raised 1 to 1 1/2 above current level. Or, he can take up the old ceramic tile but then he‘d have to remove the old layer of plywood and put down a new layer, which will be more labor-intensive and expensive. Is there any other issues regarding these two scenarios that I should take into account?
- The largest advantage to taking up the old floor and replacing the sub floor is that you get a chance to see if there are any underlying problems (i.e. rot, unevenness, cracks). When I had my floor tiles removed and replaced, it was found that the original sub floor was improperly installed, was rotted by the kitchen door, and was hiding some structural issues. Sounds scary I know, but I would rather find out about these things and fix them before laying a new floor than having to rip up said new floor later to fix them.
- Q:Ok so our bathroom is old and crappy and the faucet in the shower always come off. I was taking a shower and when i went to put back the body wash it fell and must have landed on the faucet and the faucet came off and two tiles along with it. The tiles are broken into little pieces. My mom is gonna be mad but it wasn‘t even my fault im so scared =(
- stick the tiles back together and back on the wall it will be like a jigsaw puzzle-so cool!
- Q:Please help me decide the right color to use. We are renovating our bathroom and I always wanted a navy blue or maroon toilet bowl. Today, I see a perfect navy blue/dark blue toilet bowl but I do not know what is the best color of tiles or walls should I use. We do not like white tiles or walls since it is really hard to maintain. My husband wanted a floor to ceiling wall tiles. Please advise.
- I also like floor to ceiling tile but usually not the whole room, but definitely in the whole tub/shower area. I think the rest of the room should be painted. As for color choices with a navy blue toilet... Thinking into the future and a possible sale of your home someday, I would go with a neutral color tile, possibly using the same tile (floor to ceiling) in the tub/shower area and on the floor of the bathroom. This really makes the whole room appear larger. If you go with the navy toilet bowl, gray and beige shades of tile would both go well and keep the hard-to-change things in the room, neutral. A new owner could easily change out a toilet if they did not appreciate the look of navy as you do but replacing the tile is a big issue. Stay neutral. So, navy bowl, beige or gray tile, sink-?, countertop-neutral complimentary to the tile, walls-shade of gray or beige. You can then add a pop or two of another color to liven up the room if desired. Like red navy towels or throw rug. Or gray print shower curtain. Or a colorful piece of art on the wall.
- Q:I was thinking of installing ceramic floor tiles for countertop in order to save money. I will use 1/16 joints with a dark tile and dark grout. The edges will be mahogoney or oak. I would think that floor tile would hold up better because it is thicker and more durable. Anybody have experience with installing this type on counters? tx in advance..
- yes you can use floor tiles, in fact floor tile are harder by their nature ( better clays, higher class rating, dense body structure and longer firing times ), make sure the top is properly prepared for tiles and as someone has mentioned are usally better off cut by wet saw. if you going for floor tiles try porcelian floor tiles extremely durable as they are thee most dense tiles out there offeric the best scratch resistance of any tile
- Q:It has been installed on a concrete slab for about five months now, could the slab not have cured right or is the tile layed wrong?
- probably there was dirt or something under the tile proir the installation. or the adhesive was not put on properly. you will need to remove the tile, clean the floor completely and re install, and re grout.
- Q:What techniques and tools would make it easier to go through doorways when laying ceramic floor tile
- When installing ceramic tile, great care should be taken when measuring around your doorways. The doorways are the hardest place to apply tiles, as the area has many sizes to take into consideration. Cutting and installing ceramic tile around doorways should not be seen as a daunting task.Before you begin, you will want to first take careful measurements at your doorway. Once you have the proper measurements, you will then want to cut your tile using a masonry saw. Cut your tiles to fit the measurements of your doorway and lay them in the doorway as you cut them to help you keep track of where each tile should go. you can find some good tile saws in my source site.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Full Polished Glazed Porcelain Tile 600 YDL6BB260
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
