Edge Banding Machines CHINA MARKET AND PANAL SAW
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 kg
- Supply Capability:
- 5000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of Edge Banding Machines-Panel Saw Description
A panel saw is any type of sawing machine with a sliding table that cuts sheets into sized parts.
A sliding panel saw was invented by Wilhelm Altendorf in 1906 in Germany. Its invention set a new standard in woodworking, with dramatic differences from traditional machines. Up to that time, a conventional table saw had no mechanism for edging. Meaning that for the first and second longitudinal cut on untreated massive wood, the lumber always had to be fed manually through the saw blade. The new system accomplished the task more elegantly by allowing the work piece to be fed through the saw blade while lying on a sliding table. Thus cutting becomes faster, accurate and effortless.
2.Main Features of Edge Banding Machines-Panel Saw
Panel saws are used by cabinet shops to easily cut panels, profiles, solid-wood, MDF, laminates, plastic sheets and sheets into sizes or cabinet components. They are also used by sign shops to cut sheets of aluminum, plastic and wood for their sign blanks. Some higher end panel saws feature computer controls that move the blade and fence systems to preset values. Other lower end machines offer simplicity and ease of use, including full scale hobbyist level panel saws at a mere fraction of the cost. While the entry level machines are designed for light duty usage, they offer home DIYers a cheap alternative for infrequent cutting when accuracy and clean cuts are not required.
Panel saws can have one main saw blade, or a scoring along with a main saw blade. Scoring is used to create a groove, especially in double side laminate before the main saw rips the piece apart, to avoid chipping. The scoring saw rotates in an opposite direction, as the main saw to avoid chipping.
3.Edge Banding Machines-Panel Saw Images
4.Edge Banding Machine-Panel Saw Specifications
Maximum cutting length2800mm2800mm
Maximum cutting thickness80mm80mm
Main Blade sizeΦ305×Φ30mmΦ305×Φ30mm
Slot Blade sizeΦ120×Φ22mmΦ120×Φ22mm
Main saw shaft speed4000/5000rpm4000/5000rpm
Slot saw shaft speed9000r/min9000r/min
Main saw motor power5.5kw4kw
Slot saw motor power1.1kw1.1kw
Total power6.6kw5.1kw
Suction mouthΦ100×1Φ100×1
Weight800kg770kg
Box set dimensions3400×1150×1100mm3400×1100×1100mm
5.FAQ of Edge Banding Machines-Panel Saw
1) What can we do for you?
.We can ensure the quality of the Edge Banding Machines-Panel Saw and avoid extra expenses for customers.
.We can provide you the professional technical team.
.We can provide professional building proposal for your projects.
2) What promises can be done by us?
. If interested in this kind of formwork, please feel free to write us for any QUOTE.
. If need any technical and building assistance, we could provide on-site professional staff for instruction.
. Please DO check goods when courier knocks your door and contact us asap if any issueS.
3) What about of our after-sale services?
. Response will be carried out in 24hours after receiving any complain or request.
. Any formwork cost can be refund after order is confirmed.
. If the products are not based on the requirements, there will be the relevant compensations made for you.
4) What about the package and shipping time?
.Packing: wood package and adhesive tape
.Shipping: by sea
Shipping time: Normally small orders, it just1week business days to arrive your hand; When comes to the customs declaration, it may need 2weeks.
- Q:How to seal the edge of panel furniture?
- Edge banding machine is not a curve and straight line, well, if not, then hand stick
- Q:Types of edge banding
- Acrylic edge strip is made of acrylic extrusion molding. PMMA, commonly known as organic glass, also known as acrylic (Acrylic), from this name, you may not know what kind of material it is, and no way of knowing what elements it is made of. The polymer chemical name of transparent material called polymethyl methacrylate, acrylic plate often said is poly methyl methacrylate (PMMA) plate, which is composed of methyl methacrylate monomer (MMA) polymerization. High transparency. Organic glass is the best polymer transparent material at present. The transmittance is 92%, which is higher than that of glass. The lamp is called the artificial sun solar quartz is done, this is because the quartz can be completely through ultraviolet. Ordinary glass can only penetrate 0.6% of ultraviolet light, but organic glass can pass through 73%. Shanghai plastic sealing edge adopts imported production equipment and raw materials, good toughness, products edge and face color, with anti oxidation and anti ultraviolet effect, and high temperature, cold resistance. Mainly suitable for high-grade furniture, cabinets, doors, shelves, bedroom suites, office furniture, according to the product specification or customer requirements to provide a variety of sizes, thickness can range from 0.5mm to 8mm, width from 9mm to 180mm, priority technology, edge expert.
- Q:How to seal the opening of the cabinet?
- Cabinet? If it is a circular hole can be used for special edge edge, if the square hole is required in the basis of edge banding on sealed glass glue.
- Q:How much is the furniture edge banding machine?
- You can choose banding machines of different types according to their own needs, my friend spent more than 110000 to buy one, some features do not, in general I Albert woodworking machinery bought only spent more than 50000, better than he that fortunately, is practical
- Q:South Hing edge machine before the block after the action no action to repair block
- You'd better have it repaired by the manufacturerSealing machine is suitable for medium density fiberboard, blockboard, wood, particleboard, plywood and other linear polymer doors, edge trimming, disposable with double-sided adhesive tape cutting edge edge tape pressing, block, chamfering, rough trimming, refinementScraping, polishing and other functions, the edge is exquisite and smooth, feel good, sealing line straight and smooth. The equipment is stable, reliable, durable and moderate in price. It is especially suitable for manufacturers of large and medium-sized furniture, cabinets and other panel furniture
- Q:Method for using small-sized edge banding machine
- 1. Turn on the power before checking whether the switch is in the closed position. Close the trimming and turn the heating switch on the right to make it work.2, the edge belt is arranged on the rotating disc edge is greater than the thickness of 3-4MM, otherwise edgeband can not completely seal plate, there will be a period of above or below the seams phenomenon, the edge by hand pressure with five-star lever into the scissors seat, front and rear belt pressing lever presses down edgeband not too tight, not too loose, too tight edgeband cannot pass through the pressure rod, loose edge will appear in front of or behind the phenomenon of deviation.3, before the start of the work to see if the melt has been melted, and then send the material size of the pressure modulation plate thickness, size, start the transfer switch, check the amount of sizing, and whether it is suitable for working conditions.
- Q:12 mm sunshine board with what specifications of edge banding?
- The sun in color: transparent / Blue / Green / White / Brown / Blue routine specifications: 2.1m (W) * 6m (length), thickness: 6.0mm, 8.0mm, 10.0mm three layer: thickness: 12.0mm, 14.0mm, 16.0mm, 18.0mm panel color: transparent / Blue / Green / White / Brown / Blue General specifications: 1.22/1.56/1.82/2.1M (width) *30M (length), thickness: 1.0-15.0MM such as a large quantity, color and specifications can be customized according to requirements of aluminum strip is mainly used for fixed joints between PC plates, screws, with waterproof tape and EPDM tape to the water leakage effect, effective and beautiful appearance, long service life, no corrosion of the plate. Mainly used for closing sun plate sealing ends, prevent dust, rain, worms into the hole, material life and beauty!
- Q:I want to know how to use the veneer to seal the edges. The bark is 0.6MM. Is it made by hand or by the machine?
- It's better in quality, but not as good in appearance as the machine. It's not that good. In fact, it is recommended to use manual.
- Q:Can the reinforced edge of the raft foundation be mechanically connected?
- There are two kinds of edge banding: 1, longitudinal reinforcement, bent hook and interlaced edge banding. 2, U rib structure edge banding methodIn the first type, the bottom and top longitudinal bars shall be staggered 150. After that, a side structure steel bar shall be attached to the two interlaced bent hooks. Therefore, the design shall be considered as the way of sealing the edges
- Q:The more detailed the better, as long as the edge and veneer veneer detailed steps, other steps do not use.
- The answer to the 80home fashion furniture is very standardPlate sanding refers to the customer will need to add the wood edge or due to stitching caused by surface roughness of substrate enough through the wide breadth sanding machine for sanding processing, mainly in order to achieve the purpose of smooth surface for hot pressing plate is not uniform throughout the compression of thick sand is light foaming. An attached sander function, sometimes plate thickness does not meet the regular customer needs, only by sanding again and again to reduce the thickness of the thickness of demand until close to the customer so far. Because the accurate thickness of sanding machine can be accurate to about 10S, so with the caliper can reach the thickness of purpose.A process is in fact in the preparation of the veneer veneer veneer cutting industry. Because of the impact of natural conditions, the conventional width veneer are generally restricted in a dozen centimeters (some more narrow, of course there are some more wide), so must pass before veneer and veneer edge stitching, there will be a lot of white edge (also is the color difference and the middle) if you do not cut off together will be very ugly, in order to make the stitching seam is not too obvious to do so to seal, then as long as two edges to splice line can be better. There are special cutting veneer veneer cutting general machine, cutting machine blade length of two or three meters, basically can satisfy the needs of
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Edge Banding Machines CHINA MARKET AND PANAL SAW
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 kg
- Supply Capability:
- 5000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
