Concentric overhead conducting wire JLHA1/G1A JLHA2/G1A

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
200 m
Supply Capability:
100000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product properties:  

1. The long-term working temperature allowed by overhead conducting wires is 70°C;  

2. When there are large-span rare weather conditions and there is less ice coating occurring in heavy ice areas, maximum stress the lowest point of the conductor sag should not be more than 60% of instantaneous destructive power;

3. When the wires are connected, strands around the connecting pipe should not bulge, otherwise the strands of wires in operation will be unevenly stressed, after the joints are pressed, outlets of connecting pipe should be covered with moisture-proof paint to prevent corrosion; 

4. When the wires are installed, sag stress of all the wires at the same gear should be the same, and within the range permitted by the limited distances to the ground and exceeding the distance for protection of building, the conducting wire stress can be higher by 10-15% than normal tension.  Scope of application:  This product is applied to overhead power transmission and distribution lines.


Scope of application:

This product is applied to overhead power transmission and distribution lines.


Type and Specification:

New Type

Original type

Description

Specification No.

JL

LJ

Aluminum stranded wire

10--1500

JL/G1A  JL/G1B

LGJ

Steel cored aluminum stranded wire

16--1250

JL/G1AF  JL/G2AF

LGJF

Anti-corrosion steel cored aluminum   stranded wire

16--1250

JLHA1   JLHA2

LHAJ

Aluminum alloy stranded wire

16--1250

JLHA1/G1A  JLHA2/G1A

LHAGJ

Steel cored aluminum alloy stranded   wire

16--1120

JL/LHA1  JL/LHA2

LLHAGJ

Aluminum alloy cored aluminum stranded   wire

16--1400

JG1A  JG1B  JG2A  G3A

GJ

Steel stranded wire

6--63

JLB1A  JLB1B JLB2

LBGJ

Aluminum-clad steel stranded wire

4--200






Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:do you have to use a fuse link when hooking up your amp power cable to your battery?
so in theory you want to make sure the wire you are using can handle the the same amount of amperage as the amp or more
Q:My Cd-Rom will not open when ide cable is plugged in.?
Your CD-ROM should have at least two cables connect to it, a power cable and IDE cable that should also be connected to your motherboard or other interface card. Disconnect the IDE cable from the back of the CD-ROM and reconnect it, do the same on the opposite end of the cable. Next, if your CD-ROM drive is not getting any power disconnect the cable from the back of the drive and reconnect it. Check jumpers If you've recently installed any new disk drives such as a new hard disk drive verify that the jumpers are properly set on the back of the CD-ROM. Having the jumpers set improperly to master or slave can cause the CD-ROM to not work. Notice the 1 missing pin in the middle of your Cd-Rom IDE connection?. On your IDE cable there is a blocked hole in the exact same place. If you turned this cable around the wrong way you might have bent one of the pins or broken it off completely
Q:No 6 pin power cable in PSU for graphics card?
maybe okorder.com/... for your vga card and your 500 watt psu is certainly strong enough to support the graphics card. ~hope it help~
Q:Power cord(cable) size?
If you have the ability to increase the voltage to compensate for the volt drop and the cable has sufficient current carrying capacity, then you are fine. The volt drop will cause a little wasted power but nothing compared to cable costs probably. Presumably your boosted voltage generator wont be powering anything else or that will give you problems Edit, Cables are rated in rms voltage
Q:Where can I buy new Xbox 360 cables?
gamestop or OKorder maybe walmart and places like best buy
Q:Does the eVGA GT 440 graphics/video card need a power cable connect from the psu to it?o?
No, it doesn't need one, but it's also a crappy purchase. The Radeon 6670 costs about the same, doesn't require external power, and slaps the GT 440 silly.
Q:Otocinclus eating heater power cable?
No it isn't dangerous at all. He will be fine. I love otos. They are so darn cute.
Q:How much amp does an ordinary power amplifier cable might have?
There is no need for a 200 amp cable. most of the time 75 to 100 amps is more than enough. Just go to the local car audio store and pick up a amp kit. (Depending on amp size depends on price) The local Wal-Mart sales them as well. You'll spend between $25-$100 for a good amp kit. Amp Kit 1 power wire 1 ground wire 1 set of RCA for audio from sterio to amp 1 fuse.
Q:The lights in my room goes out when I take out the power cable on my PS3?
Bad wiring in the house? Sounds at least like a situation like that. Not uncommon in buildings of certain times.. older types of wiring used. And worse not ready for todays amount of electronics. So yeah check the wiring. In between time buy a few extension boxes, you know the type with more then 1 electronic socket. But most important a switch. That way you can switch it off and that way such discharges won't happen any more.
Q:Hard Drive power cables?
exactly what PSU do you have? I am sure if it's a nice modular PSU you can always contact the manufacturer and order some extra modular cables that fit the drive type you are looking for (just make sure the cables you do have will fit into those sockets - they should). I am surprised a 1.2KW PSU didn't come with connectors for 12 hard drives or more. the reason why there's only 4 on one is because that's all the power that channel can handle. you shouldn't overload it. calculate the load for one channel (V*A=W) using hard drive or device power specs, and IF you think there's enough extra power for one more, then stick a splitter on a connector if one is available. it's best to leave some extra Amperage headroom. if you don't want to go through the load calculations, or can't, then just use another cable. but don't simply use a splitter because it's available. you will have to look at PSU rails specs to see what each rail can handle for those modular connectors. try simply looking at the 12V and 5V alone or just the 12V.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range