High Tech 200 Rotary Drilling Rig New Design for Sale
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Tech Rotary Drilling Rig New Design for Sale
Product Features:
| Features of Chassis : |
>>It is high working stability equipped with expert chassis Which is under advanced design. |
| Drill Mast: |
>>Auto lift and fall of the drill mast, convertible and Three section of box-type of drill mast reduce the length and height; |
| Features of upper frame: |
>>Unique body lever, use bracket for upper frame, adopting the leveling cylinder is better than mast leveling, and makes the operator more comfortable. |
| Features of engine: |
>>Volvo boost、mid-cool、electrical control for engine,strong momentum,it can work at the place with 4,500m above sea level with normal condition, Euro 3 emission standards. |
| Features of rotary drive: |
>>Double-motor, double-reducer in the rotary drive, powerful output torque, high ability of stressing. It is with good adaptivity, the speed and output torque can auto-change with different geological conditions; |
| Features for operating cabin: |
>>The operating cabin to supplying the comfortable working place for operator is with all-weather design,adopt sound-proof material,elastic shock absorber，imported adjustable seat, environmental air conditioner. |
| Features for hydraulic system: |
>>Main hydraulic pump system, hydraulic pilot-operated, constant power control. |
| Features for control system: |
>>It can be real time monitored by integrated electronic control system when working, and featured with 16 warning functions. |
| Features for operating system: |
>>Display operation: set up every limit unlock、level the perpendicularity of drill mast、the reset of state parameter of working for engine,set up the logical relationship of drilling rig. |
Parameter:
| Parameter | Model | TW200 |
|---|---|---|
| Max.drilling Diameter (mm) | Distance From Center Of Rotary Drive To Slideway Of Mast | 840 |
| Max.drilling Diameter | 2000 | |
| Max.drilling Depth(m) | 65 | |
| Engine | Rated Power(kw) | tab941 224 |
| Max.output Speed(TW/min) | 2100 | |
| Rotary Drive | Max.output Torpue(kN.m) | 200 |
| Output Speed(TW/min) | 8~32 | |
| Main Winch | Max.lifting Force(kN) | 200 |
| Diameter Of Steel Rope | 30 | |
| Auxiliary Winch | Max.lifting Force(kN) | 100 |
| Diameter Of Steel Rope | 20 | |
| Mast Inclination | Side Inclination (°) | 4 |
| Forward Inclination (°) | 5 | |
| Backward Inclination(°) | 90 | |
| Pull-Down Cylinder | Max.pull-Down Piston Push(kN) | 180 |
| Max.pull-Down Piston Pull(kN) | 200 | |
| Stroke(m) | 5 | |
| Undercarrige | Track Total Length(mm) | 5200 |
| Track Plate Width(mm) | 800 | |
| Track Width(mm) | 3200~4200 | |
| Max.traveling Speed(km/h) | 2.7 | |
| Dimension | Working Condition Dimension(mm) | 8250×4200× 20060 |
| Transportation Dimension(mm) | 3400×3200×14100 | |
| Upper Frame Height(mm) | 1370 | |
| Upper Frame Width(mm) | 2800 | |
| Undercarrige Height(mm) | 1200 | |
| Rotary Radius(mm) | 3800 | |
| Overall Weight(t) | 65 |
Application of prodcts:
FAQ
1.Which payment terms can we accept?
Normally we can work on T/T term or L/C.If you choose T/T,30% payment is required in advance and 70% balance shall be settled before shipment often,it rang a little.
2.How long will our price be valid?
We are friendly dealer, never greedy windfall profit, our price remains stable,except the exchange rate and the increasing labor cost and material cost.
3.What are our advantages compared with manufacturers?
a.Detailed training-We can provide training services to different users. The training sessions include product training,operating training, maintenance know-how,standard and so on to fulfill your individual needs.The training can be conducted at client’s site.
b.Available after service-With our global distributor network, you are guaranteed with fast deliveries and services if you submit your requests.
- Q:A pile driver 1 team can play many 12mI36b steel sheet pile
- According to the geological conditions are different450 pile driverThe number of 9m Larson steel sheet piles is about 100 a day300 times the pile driverTrough sheet steel piles 9m in 200-300 days at a timeGive you a reference: 80 tonsThis is my construction data, I do not know, quasi accurate, you can refer to the next slightly!
- Q:Safety requirements for diesel hammer pile drivers for diesel hammer pile drivers
- 1, the pile driver walking and slewing, hanging pile, hammer should not be carried out simultaneously. The pile driver shall not turn or walk in full swing after hanging the pile. 2 Side Piling and long distance pulling pile are not allowed in pile driver. When the pile is hoisted in front, the horizontal distance of concrete shall not be greater than 4m, and the steel pile shall not be larger than 7m, and the pile shall be prevented from colliding with the post. 3 when the column is turned into place and the column is locked, the piling frame of the double guiding post can be operated. 4 before the start of the diesel hammer, the pile hammer, the pile cap and the pile should be on the same axis, and shall not be driven by eccentric piling. 5 in soft soil pile driving, should first close the throttle, cold beat, to each attack penetration is less than 100mm, can start the pile hammer. 6 after the start of the diesel hammer, the landing gear should be lifted. The distance between the landing gear and the top of the cylinder of the cylinder hammer shall not be less than 2m during the hammering process. 7 when the diesel hammer is running, the jumping height of the impact part shall be visually observed, and the requirements of the instruction manual shall be strictly enforced. When the required height is reached, the throttle shall be reduced and the stroke of the impact part shall be controlled. 8 during the operation, attention should be paid to the change of the soil layer and the operation of the pile driver, and the necessary measures should be taken in time. 9 diesel hammer appear early ignition, should stop working, according to the instructions for processing. 10 when the piston jumps on the cylinder hammer, the grease should be observed to flow out of the drain hole. The lubricating oil of the lower piston shall be filled according to the instruction manual.
- Q:Diesel hammer piling machine principle
- The guide rod type diesel hammer is pressed on the pile cap with a plunger as a hammer seat, and the cylinder is used as a hammer head to move up and down along the two guide rods.When in operation, the pile hanging in place pile frame in Longmen, then put the diesel hammer at the top of the pile, the hook will lift down the cylinder, and the cylinder sleeve off hook to the whereabouts of the piston, the cylinder will be closed in the air compression cylinder rocker pin until the pressure continues to fall outside the cylinder pushing hammer on the base of the fuel pump, fuel pump will be injected into the cylinder oil mist, oil mist meet high temperature gas burning immediately above, blasting, explosive shock down pile., to push the cylinder to cylinder to rise, fall along the guide rod, and the beginning of the second impact cycle.
- Q:What is the starting current for a 55 kW pile driver? What's the big leakage switch, please?
- 55KW motor, rated current of about 110A.If it is started directly, the starting current is about 450A---800A.You can choose 150A with leakage protection circuit breaker.
- Q:CFG pile 22 meters deep, please tell me how many piles are required to flow out at the side of the slope. How about the 360 degree rotation of the pile driver?
- General 50-80, the best drill pipe can be connected, but the construction capacity of pile driver is limited, generally there are more than 20 meters, more than thirty meters, high rack will be able to play deeper.
- Q:Why is AMD's CPU name a pile driver or something?
- This is the core code of CPU development, the first generation of the second generation of bulldozer called piling machine perhaps there roller and so on development of a CPU architecture, the need to re design a lot, is not a simple change, process improvement etc.,
- Q:Mechanical piling machine about how much money?
- A guide frame consisting of two guide rods is used in front of the pile to control the direction of the pile driving so that the pile can be accurately penetrated into the formation in accordance with the design orientation. The basic technical parameters of a pile driver are impact weight, impact kinetic energy and impact frequency. According to the motion of the pile hammer power source can be divided into hammer, hammer, diesel hammer, hydraulic hammer etc..
- Q:My family from the building, a three storey, only two and half layer design now, frame structure and prefabricated panels, a total of three half empty, with the inner diameter of the air is piling machine, 30CM in the field, with an average depth of 6 meters, I asked how wide a safe? The master said, "one meter, one. I feel a little too dense."! Ask everybody specially!How many meters can I use if I choose an empty 80CM pile driver? My maximum span is 4 meters, and some are 3 meters and 2 meters. Because the master is how many piles count money, so there is little doubt!
- Under normal circumstances, only in the bottom of the structural column to the base of the force transmission area, piling, three layers of self building (small span), each column at the bottom of the general arrangement of 1-3 piles, but the depth of the pile should be determined according to the local geological conditions. The spacing of the piles is usually 3-3.5 times the diameter.
- Q:What about a dry digger, a pile driver? How much money? What's the speed?
- Shanghai Zhonglian second-hand excavator market professional solution for you:1, the dry piling machine can be refitted by excavator, but in fact it is very convenient.
- Q:I've heard that money is good. Where do you sell better quality?
- The pile driver in Zhengzhou is quite good. There are several places in Yunnan that are useful and of high quality and low price.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
High Tech 200 Rotary Drilling Rig New Design for Sale
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
