Cu core Low-smoke&Halogen PVC Insulated Armoured Power Cable
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 1000000meters m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Cu core Low-smoke&Halogen PVC Insulated Armoured Power Cable
Application:
It is suitable for transmission line with a rated AC voltage U0/U 3.6/6KV and below.
Executive Standard: GB/T12706-2008 ,equivalent to IEC502(83)
Operational Performances:
1. Working temperature:
For general type, not over 70°C as the maximum
For 105°C flame-retardant material, not over 105°C as the maximum
For 135°C flame-retardant material, not over 135°C as the maximum
2. Lowest ambient temperature:-40°C for fixed laying,-20°C for non-fixed laying
3. Rated voltage U0/U:0.6/1kV, 3.6/6kV
4. Min.bending radius:not less than 10 times of outer diameter of cable if without armor, and not less than 15 times of cable outer diameter provided the cable is armored.
5.Short-circuit condition:The maximum temperature of cable conductor will not exceed 175°Cunder short-circuit condition(longest time of 5 seconds)
Main Technical Data
1,Material:
Table 1:Flame-retardant Technical Data of Varieties of Materials
Item | Technical Data | ||
General flame-retardant PVC | Low smoke and low halogen material | Low smoke and halogen-free material | |
Oxygen index(%) | 30-20 | 31-33 | 36-40 |
Smoke density | 600 | 300 | With flame:50 without flame:260 |
Hydrogen halide release (mg/g) | 580 | 100 | 0.5 |
2,Product
Table 2:Main Performances of Product
Serial No. | Item | Performance | ||
1 | Structure | Attached Sketch* | ||
2 | Conductor resistance | As per GB3956-1996 | ||
3 | Voltage-withstand test | No breakdown | ||
4 | Mechanical | Tensile strength | Insulation | Min.12.5N/mm2 |
Sheath | Min.12.5N/mm2 | |||
Elongation at break | Insulation | Min.150% | ||
Sheath | Min.150% | |||
Mechanical property after aging | Tensile strength | Insulation | 100°C±2°C,Min. 12.5N/mm2 in 7 days | |
Sheath | 100°C±2°C,Min. 12.5N/mm2 in 7 days | |||
Change rate | Insulation | 100°C±2°C,Max.±25% in 7 days | ||
Sheath | 100°C±2°C,Max.±25% in 7 days | |||
Elongation at break | Insulation | 100°C±2°C, Min.150% in 7 days | ||
Sheath | 100°C±2°C, Min.150% in 7 days | |||
5 | Flame-retardant feature | In compliance with GB/T12666.5-1990(Type CB) and IEC332-3 (Type CB) | ||
| Insulation resistance constant Ki MΩ·km | Minimum at 20°C | 36.7 | |
At 70°C | 0.037 |
3,Color Code of Insulation Core: Complies with Requirements of National Standard GB6995.5-86
2-core | Red,Blue | 4-core | Red,Yellow,Green,Blue |
3-core | Red,Yellow,Green | 5-core | Red,Yellow,Green,Black,Blue |
4,Vary in cross-section area, the four and five's
5,Basic Type and designation
Type | Designation of product |
VV | Cu core PVC insulated&sheathed power cable |
VLV | Al core PVC insulated PVC sheathed power cable |
VV22 | Cu core PVC insulated&sheathed armored power cable |
ZR105-VV | Cu core flame-retardant (105°C)PVC insulated&sheathed power cable |
ZR135-VV | Cu core flame-retardant (135°C)PVC insulated&sheathed power cable |
ZR105-VV22 | Cu core flame-retardant(105°C)PVC insulated&sheathed armored power cable |
ZR135-VV22 | Cu core flame-retardant(135°C)PVC insulated&sheathed armored power cable |
ZR105-VLV22 | Al core flame-retardant(105°C) PVC insulated&sheathed power cable |
ZR135-VLV22 | Al core flame-retardant(135°C)PVC insulated&sheathed power cable |
ZR105-VDVD | Cu core low-smoke&halogen PVC insulated&sheathed power cable |
ZR135-VDVD | Cu core low-smoke&halogen 135°C PO insulated&sheathed power cable |
ZR105-VDVD22 | Cu core low-smoke&halogen PVC insulated&sheathed steel tape armored power cable |
ZR135-VDVD22 | Cu core low-smoke&halogen 135°CPO insulated&sheathed steel tape armored power cable |
VV32 | Cu core PVC insulated&sheathed thin steel wire armored power cable |
VV42 | Cu core PVC insulated&sheathed thick steel wire armored porter cable |
ZR105-VV32 | Cu core flame-retardant (105°C)PVC insulated and sheathed thin steel wire armored power cable |
Type explanation
Code and definition
Item | Code | Definition |
Flame-retardant code | / ZR | Non flame-retardant can he omitted Flame-retardant |
Insulation material | V VD | PVC Low-smoke & halogen material |
Sheath material | V VD | PVC Low-smoke & halogen material |
Armor material | 22 32 42 | Steel tape armor Thin steel wire armor Thick steel wire armor |
Class of heat-resistance | 70 90 105 135 | Max. operating temp. is 70°C Max. operating temp. is 90°C Max. operating temp. is 105°C Max. operating temp. is 135°C |
Rated voltage | 0.6/1kV 3.6/6kV | Rated voltage U0/U is 0.6/1kV Rated voltage U0/U is 3.6/6kV |
Specification Size
Marking Examples:
Example 1:Copper-core PVC insulated and sheathed steel-tape armored 3+1 type, main core section is 50mm2 and that of neutral core is 25mm2, such power cable can be represented by: VV22 3X50+1X25
Example 2:Rated voltage is 0.6/1kV copper-core flame retardant(135°C)PVC insulated and sheathed, small-gauge steel wire armored, 4+1 type, main core section is 70mm2 and that of neutral core is 35mm2, such power cable can be represented by: ZR135-VV 0.6/1kV 4 X 70+1x35
Example 3: Rated voltage is 0.6/1kV, copper-core flame-retardant(105°C)PVC insulated and sheathed, steel tape armored, 3+2 type, main core section is 185mm2 and that of neutral core is 95mm2, such power cable can be represented by: ZR105 -VV22 0.6/1kV 3 X 185+2 x 95
Example 4: Rated voltage is 0.6/1kV, aluminum core PVC insulated and sheathed, 3+1 type, main core section is 50mm2 and that of neutral core is 25mm2, such power cable can be represented by: VLV 0.6/1kV 3 X 50+1 X 25
Example 5: Rated voltage is 0.6/1kV,aluminum core flame-retardant PVC (105°C)insulated and PVC sheathed power cable with main core section to be 50mm2 and that of neutral core is 25mm2, it can be represented by: ZR105-VLV 0.6/1kV 3 X 50+1 X 25
Example 6: Rated voltage is 0.6/1kV,aluminum core flame-retardant PVC (135°C)insulated and PVC sheathed power cable with main core section to be 50mm2 and that of neutral core is 25mm2, it can be represented by:ZR135-VLV 0.6/1kV 3 X 50+1 x 25
- Q:Mine isn't so I'm just wondering what it would do.
- the power noise will bleed through the lines.......which means u would have interference noise in ur system.....and even alternator noise(were buzzing/ringing high pitch whine increases with engine speed) sometimes.......
- Q:I have my old 350 power supply cable but i got a new 520 one. do i have to use the defuly 520 power suppl cable? i use my old cabbke
- No, as long as it can supply the proper voltage and amperage.
- Q:I have one Ethernet cable running to a WiFi antenna. The antenna is powered by the Ethernet cable, using PoE. I want to be able to plug the current cable into a hub or switch, so I can connect other devices (non PoE) like an Xbox 360 or PC, but I also need to maintain the PoE to the antenna. Taking the antenna off PoE is not an option. What kind of device can I use to split this PoE line into PoE and non PoE cables?
- familiar ethernet cable is nice for 100m (approximately 328 ft), Any device which includes a hub, router etc. oftentimes acts as a repeater, 'cleansing' and boosting the sign to make greater desirable the variety. The distances you point out will have not any impact on ethernet. besides the shown fact that any undesirable connection or cable alongside the way can doubtlessly injury the sign. I have not any issues extending broadband ethernet hyperlinks over a number of thousands of metres with strategically placed small switches alongside the way for serious enterprise use.
- Q:(above question) and can i use a fender strat guitar with this amp instead of a bass? and are there things i should know before using this amp?
- You have three questions, let's see if I can get you three satisfying answers. Does it need a pre-amp? That's kind of like asking, does my dvd player need surround sound? In short, yes. But really, no. A good preamp will make your sound much better if used effectively. Can I use a Fender Strat guitar with the amp instead of a bass? Yes. Playing a guitar through a bass amp is done from time to time. There are pros and cons. The big pro is the low end and the volume. The big con is that you lose your high end pretty much entirely. So, you will sound pretty muddy and gross. But, you can do it and it shouldn't blow up at low/moderate volume levels. Are there things I should know before using this amp? Have fun, learn to play, when you know you will play for a long time - upgrade to tube.
- Q:Electrical equipment installation project "power cable laying" cable cross-sectional area refers to the cable cross-sectional area, or refers to the copper core cross-sectional area, such as 3 × 25mm2 refers to 25mm. 75mm2 or cable cross-sectional area of 490mm2? More
- Is not the power cord is loose, or is the motherboard battery power
- Q:cause i wanna make my gameplay hd, but when the hdmi cable is in, there not enough space for the power brick cable,
- Seeing as the power cable gives the system the power it needs to run, no, you can't play without it. However, you are able to play with both the power cable AND the HDMI cord. There's enogh space for both to fit into the console, and the power cord plugs into a wall outlet while the HDMI cord plugs into your TV's HDMI slot. There shouldn't be any problem with room.
- Q:Power cable YJV22-8.7 / 15kv-3 * 300 what meaning
- (Including the insulation layer) of the total area should not be greater than 40% of the internal cross-section; . the tube wire is not allowed to have joints and twist the phenomenon; . the same loop of the phase of the wire, Regardless of the number of roots should be penetrated into a tube, and different circuits and different voltage lines are not allowed to wear a tube, AC and DC line wires shall not wear a tube, a phase line are not allowed to penetrate alone Steel Pipe. If the requirements are not strict, the power cable, the control cable can wear the same tube; but the signal line will be discretionary, although the signal line is shielded cable, but in order to maximize the signal transmission quality, and other signal lines are generally layout. UPVC plastic pipe with excellent insulation, acid, corrosion resistance, many chemical plants used as infusion piping. The other is also used for sinking engineering, medicine piping works, mineral salt water piping works, electrical piping works. Also widely used as a telecommunications cable. So it can be UPVC pipe to do electrical piping. As for the galvanized steel pipe is not necessary. If the power cable and signal cable at the same time with UPVC pipe laying, were classified separately perforated, the best interval between the two 20cm to prevent interference, with galvanized steel pipe pipe is not necessary so care.
- Q:I blew 2 fuses in my amp in my car, i have replaced them both, one was a 30amp and the other a 20. The 30 amp was an inline fuse from the battery to the amp and the 20 amp was a standard 20 amp fuse in the amp. As i said i replaced both fuses and try the amp again and it wouldnt go. There is a LED light on the top just lighting up a logo, when i attatch the power from the battery the light goes off and when i disconnect it the light comes on. When i dissconect the power the red light for diagnose comes on.
- This sounds like a wiring problem i reccomend you completly inspect all wiring to your amp if looks fine then use a test light and test all the wiring if all passes then your problem is within the amp itself. test the remote wire with stereo to car on if wired that way.
- Q:Hi, my old laptop has broken: when i try to put the power cable into the socket on the laptop, it only goes in on a certain angle and never stays there even when taped, so its impossible to get the laptop on for more than a few seconds. I've tried different power cables too, and nothing seems to work, so it must be the actual laptop problem... how can I get the laptop to stay on to retrieve some photos that I have got on there? Thanks
- you will no longer get lots money for a computing device without stress. right here is what to do: (a million) purchase a caddy ( a container that turns the stress into an exterior USB stress) ?10 - ?20 (2) take the stress out of the previous device, positioned it in the caddy, connect it to a distinctive computer (3) use the different computer to wipe the stress (4) flow the stress back to the computing device (5) sell the computing device (and the caddy, in case you do no longer want it; notwithstanding that's properly worth conserving it for emergencies).
- Q:How would I go about stripping 4 gauge power battery cable for my amp? oh and how would i screw the fuse holder down? with what kind of screws? thank you!
- I use a knife to strip that wire, just be careful not to nick the wire. Drill a hole and use sheet metal screws to screw the fuse holder down.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Cu core Low-smoke&Halogen PVC Insulated Armoured Power Cable
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 1000000meters m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords