Bearings single row cylindrical roller, model NU204

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
500 pc
Supply Capability:
10000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

NU style with double outerrid, and the outer ring, roller,cage can separate from the inner ring.


Bearings single row cylindrical roller, model NU204


Product Features:

The rollers of the cylindrical roller bearing are usually guided by two flanges of a ring.

Because this assembly part composed of cage, roller and guide ring can be separated from

another ring, the cylindrical roller bearing belongs to separable bearing. This type of bearing

can be easily mounted and dismounted. Its advantages are obvious especially when there is

interference fits between the inner, outer ring and the axis, housing.

This bearing is usually subjected to radial load, only the single-row bearing with inner& outer

rings flanges can bear small steady axial load or great intermittent axial load. It has a high

requirement on the processing of the fitting parts such as axis and housing bore, etc.


Product Application: 

Cylindrical roller bearings are mainly used for:

- Iron and steel metallurgical industry

- medium and large motor

- generator

- combustion engines

- gas tuibine

- machine tool spindle

- speed reducer

- loading and unloading machinery and all kinds of industrial machinery


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Seek expert help: cylindrical roller bearings, grease injection, the operation of a short period of time, grease is thrown out, what is the reason, how to solve? Two hundred
The higher the speed, the greater the centrifugal force, this point should be mastered. If the grease of good quality, from the bearing chamber to consider the change of the bearing chamber space, the sides of the bearing sealed by using injection nozzle gun grease can improve the lubrication condition.
Q:Why does cylindrical roller bearings fail abnormally?
Generally, the causes of abnormal failure of cylindrical roller bearings are as follows:1, cylindrical roller bearing manufacturing accuracy is poor, one end of the bearings with loose, and travel source is larger, bearing frame rigidity is poor. Or the bottom of the bearing seat is uneven.2, cylindrical roller bearings axis misalignment (misalignment) axis and the housing of the shoulder to the surface is not vertical, shell installation, bearing two or more holes, different axis.
Q:How to check the thrust cylindrical roller bearings?
This data is the minimum axial load, not the maximum axial load.
Q:Cylindrical roller bearings, mounting dimensions, specific meaning? Twenty
I don't know what you mean. The size of NUP2311E is: inside diameter, 55mm, outside diameter, 120mm height: 43
Q:Does the thrust cylindrical roller bearing need a bearing seat?. Five
In general, this kind of bearing does not use the bearing seat
Q:Cylindrical roller bearingWhat are cylindrical roller bearings, are they available in Kunshan?
This is the simple cylindrical roller bearing rolling body is cylindrical roller, divided into full (no fixed retainer) and belt retainer 2 categories, because the rolling roller, so the axial bearing capacity relative to the ball bearing to be bigger.
Q:Cylindrical roller bearings standard 10
There is some doubt about your description. According to your internal diameter and external diameter, if the cylindrical roller bearings, the scroll is quite small. I don't see much of this kind of cylindrical roller bearing. Do you mean needle roller bearings? If needle roller bearings can be found, and HK2514/18 RS similar models.
Q:Double row cylindrical roller bearings how to disassemble?
If it is replaced, use the flame to heat it quickly under the conditions permitted! The inner ring is heated and expanded and removed rapidly; flame cutting is used directly.
Q:Attention problems of cylindrical roller bearings
1. The installation of bearings must be carried out in a dry, clean environment. Before installation, the machined surface of the shaft and shell, the shoulder end, the groove and the joint surface shall be carefully inspected. All mating surfaces must be carefully cleaned and removed, and the cast surface must be clean. 2, before the installation of bearings, should be cleaned with gasoline or kerosene, dry after use, and ensure good lubrication, bearings generally grease lubrication, oil lubrication can also be used. Grease lubrication, grease, anti rust, extreme pressure and other excellent greases should be used. Grease filling capacity for bearings and bearing box volume of 30%-60%, should not be too much. Double row tapered roller bearing and water pump shaft bearing with sealing structure have been filled with grease, which can be used directly by users and can not be cleaned again. 3, bearing installation, must be applied equally in the circumference of ferrule end face pressure to press into the ring, and may not directly tap bearing end face to the top tool, so as not to damage the bearing. Small amount of interference in the case, at room temperature can be used to suppress sleeve bearing ring face, beating with a hammer sleeve, the sleeve will be pressed into the ring balance. If installed in large quantities, use hydraulic press. When pressing, the outer end surface of the outer ring and the outer shoulder of the shell face shall be ensured, and the inner ring end face is tightly pressed with the shoulder end of the shaft platform, and no gap is allowed.
Q:What are the components of cylindrical roller bearings?
The utility model has the advantages of convenient installation and disassembly, especially when the inner, outer ring and the shaft and the shell are in interference fit. Such bearings are generally only used to bear radial load, only the inner and outer ring with single block bearings can bear less axial load or larger intermittent axial load.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range