Aluminum sheet,plate for alu composite panels

Ref Price:
Loading Port:
China Main Port
Payment Terms:
Min Order Qty:
Supply Capability:

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Aluminium is a relatively soft, durable, lightweight, ductileand malleablemetalwith appearance ranging from silvery to dull gray, depending on the surfaceroughness. It is nonmagnetic and does not easily ignite. A fresh film ofaluminium serves as a good reflector (approximately 92%) of visible lightand an excellent reflector (as much as 98%) of medium and far infraredradiation. The yield strength of pure aluminium is 7–11 MPa,while aluminium alloys have yield strengths ranging from200 MPa to 600 MPa. Aluminium has about one-third the densityand stiffness of steel. It is easily machined,cast, drawn and extruded.

Aluminium alloys (or aluminum alloys; see spellingdifferences) are alloysin which aluminium(Al) is the predominant metal. The typical alloying elements are copper, magnesium,manganese,silicon,tin and zinc. There are twoprincipal classifications, namely casting alloys and wrought alloys, both of which are furthersubdivided into the categories heat-treatableand non-heat-treatable. About 85% of aluminium is used for wrought products,for example rolled plate, foils and extrusions.Cast aluminium alloys yield cost-effective products due to the low meltingpoint, although they generally have lower tensile strengthsthan wrought alloys. The most important cast aluminium alloy system is Al–Si,where the high levels of silicon (4.0–13%) contribute to give good castingcharacteristics. Aluminium alloys are widely used in engineering structures andcomponents where light weight or corrosion resistance is required


Alloy:  AA1050, 1060, 1100,AA3003, 3005, 3015, 5052, 5754, 5083,8011, etc

Temper:H14/16/18/22/24/32, HO etc.


Width: 100mm2300mm (Can be slitted)

Application: Roofing, Can stock, Marine plateAnti-slipery purpose in vehicles, packing and appliance.


1.     Excellent quality of products

2.     Quick delivery

3.     Best service to clients

4.     BV,SGS  avalible

5.     No buckle o waveness

6.     Tension leveling

7.     Certificate of Origin

8.     Form A,E

Packaging  Detail:

Carton ,Woodenpallet with plastic protection packing ,standard seaworthy packing or as yourrequest.


AnnualProduction capacity of 600,000 tons.

Products areexported to United States, Canada, U.A.E, Brazil, Mexico,Thailand, Vietnam,Nigeria  etc, over 100 countries andregions all over the world.

Production Line:

CNBM aluminumproduction base is comprised of 18 aluminumannealers, 10 coil and foilmills, 4 continuous production lines, 2hot rolling production line and 3prepainted lines.


1.     What is the form of payment?

Normally 30% TT, L/C

2.     Type of quotation?


3.     Port of loading?

Shanghai port

4.     Delivery time?

30 day after client’s deposit

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:1100 scope of application of aluminum plate
1100 aluminum plate is generally used in utensils, heat sink, caps, printing plates, building materials, heat exchanger components, but also can be used as deep stamping products. It is widely used in various fields ranging from cooking utensils to industrial equipment
Q:Why does Aluminum rust is electron orbitals?
'Rusting' commonly refers to the corrosion (oxidation) of iron so when talking about other metals, it is better to use the term 'corrosion' or 'oxidation'. Aluminum can corrode and the fact that it has a general oxidation number of +3 doesn't really matter. Many elements which have a charge that is different from +2 can oxidize. Alkali metals for instance (which have a charge of +1) can oxidize. Lithium can form lithium oxide (Li2O), sodium can form sodium oxide (Na2O) and so on. However, aluminum is known to be quite resistant to corrosion (oxidation) because it spontaneously forms a thin (solid) oxide layer at it's surface protecting it from further oxidation whereas iron, for an example, will easily lose that thin layer (it ''peels off easily'') exposing more iron to corrosion. So since Al has a +3 charge and O has a -2 charge, you'll need 2 atoms of Al and 3 atoms of O to make an electrically neutral compound. 2 atoms of Al = +6 charge 3 atoms of O = -6 charge Hence Al2O3 which is aluminum oxide. I hope it helps.
Q:What are uses of Aluminum Nitride?
Don't know where you looked, but this came up with very basic web search. Metallization methods are available to allow Aluminium nitride to be used in electronics applications similar to those of alumina and beryllium oxide. Among the applications of Aluminium nitride are opto-electronics, dielectric layers in optical storage media, electronic substrates, chip carriers where high thermal conductivity is essential, military applications, as a crucible to grow crystals of gallium arsenide, steel and semiconductor manufacturing. Epitaxially grown thin film crystalline aluminium nitride is also used for surface acoustic wave sensors (SAW's) deposited on silicon wafers because of the Aluminium nitride's piezoelectric properties. One application is an RF filter used in mobile phones called a thin film bulk acoustic resonator (FBAR). This is a MEMS device that uses aluminium nitride sandwiched between two metal layers.
Q:The difference between aluminium alloy and aluminium plate
Pure aluminum density (P =2.7g/cm3), iron is about 1/3, the low melting point (660 C), aluminum is face centered cubic structure, so it has high plasticity (delta psi:: 32~40%, 70~90%), easy processing, can be made into various sections and plates. The corrosion resistance is good; but pure aluminum strength is very low, the annealed state sigma B is about 8kgf/mm2, it is not as a structural material. Through the long-term production practice and scientific experiments, people gradually to join the alloying elements and the use of heat treatment to strengthen aluminum, which has been a series of Aluminum Alloy. Adding alloy elements to form certain can with high strength in keeping advantages of pure aluminum etc. at the same time, a b value can reach 24 ~ 60kgf/mm2. so that its "strength" (strength and the ratio of the proportion of b/ sigma rho) more than a lot of steel structure become an ideal material, widely used in machinery manufacturing, transport Machinery, power machinery and aviation industry, aircraft fuselage, skin, compressor and so on, often made of aluminum alloy, in order to reduce the weight. Using aluminum alloy instead of steel plate welding, the structure weight can be reduced by more than 50%
Q:If copper wire is expensive, why not use aluminum?
They can be joined but only through a suitable device marked specifically for aluminum to copper connections. See website below.
Q:Displacement reactions with aluminum?
Aluminium has a protective coating of Aluminium Oxide, this prevents many chemicals reaching the surface. This is because aluminium has a very strong affinity for oxygen and bonds to it with extremely strong bonds. It can be removed by dipping it carefully into a solution of Mercury (II) Chloride.
Q:Heating aluminum plate, heating scheme, urgent ~!
For aluminum heating silicon heating plate is a good choice. The four corners can be fixed by screws, Beijiao can. Installation is very convenient. I was in the goodway procurement. They are guaranteed for one year.
Q:Soldering aluminum cylinder, strength?
Whether that weld will be OK depends on the diameter of the cylinder. The force on the weld will be equal to the operating pressure time the radius of the cylinder, with the wall opposite the weld have an equal force. Divide that force by the thickness of the weld to figure the stress. You want to have a safety factor of about 3. As the Bernzomatic has either a brass or aluminum head, which would melt at the temperatures which are required for true welding (melting metals so that they flow together), you will be performing brazing with a Bernzomatic. I cannot comment on the strength of the brazing bond. The thickness of the brazing metal deposit depends on the strength of the brazing alloy, which I also cannot comment on. 6061 will melt at 1206°, which you will not approach with the Bernzo kit. A blowout of a metal cylinder at 60 psi could be pretty ugly. I suggest that you befriend someone who has a TIG welder and get their help. A properly welded 1/8 thick cylinder could handle about 660 psi with no problem. If you create a lap joint, using an outer strip of aluminum, and then band your cylinder with stainless steel hose clamps, you will be relying upon the brazing only to provide a gas seal. The strength would come from the hose clamps. You still need to do some calculation on forces involved. A 1/2 wide stainless hose clamp will probably hold back about 240 lb. of force with a comfortable margin of safety.
Q:Aluminum plate belongs to steel or non ferrous metal?
Metal materials fall into two broad categories: ferrous and non-ferrous metals. What we usually call "iron and steel" is ferrous metal; copper and aluminum are nonferrous metals.
Q:How do I calculate the weight of aluminum sheet? What is the density?
First calculate the density of each aluminum plate, then calculate the volume, then the density is good, the volume is the weight

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range