Specification of Air Diffuser
Supplying Air Diffusers
-Frame Thickness: 1.0mm /0.8mm
-Any Size be customed
-Powder Coated RAL 9010/9016
HVAC aluminum air conditioner grille
Extruded Aluminum alloy (6063-T5)
Blades in 45°from aluminum profile or as customer’s requirements
30mm as standard or as customer’s requirements
0.8mm, 1.0mm, 1.2mm, 1.5mm or according to the customers’
Powder coated, Anodized , PVDF, Mill finish.
Width x Height, any sizes available
Powder for Finish
Environmental protection and non-toxic, and Color to keep 5 -10 years.
Refer to RAL colors swatch or customized colors available
Drawings designed according to the customers’ requirements
T/T, L/C, PYAPAL, etc.
Usual 15-20 work days for a 40GP container
Bubble wrap + Cartons for FCL, Bubble wrap + Cartons + Wood-box for
Stainless steel security mesh, Aluminum security mesh
Fixing and adjustable installation
Usage of Air Diffuser
· Adjustable aerofoil-designed blades provide users with the flexiblility to cater to their personal needs. Blades are individually adjustable from the face of the grilles.
· From extruded aluminum of minimum 1.0mm thickness. All grilles are manufactured from highly corrosion resistant heavy gauge aluminum.
· Corners reinforced with welded corner pieces for robust handling during installation.
· Standard powder coated white finish. Painted finish will be enamel coated and oven baked.
· Anodised finishes and other finishes are also available upon request.
FAQ of Air Diffuser:
1, What's size do u have for round type diffuser?
A: We have face size from 150mm to 550mm,neck size from 250mm to 400mm聽
2, Do u still have other types ?
A: Yes, we have round diffuser/ rectangle diffuser/ linear grilles/ baseboard diffusers,etc
3, What's the most early delivery time?
A: Within 25 days for each 40'fcl
- Q:Since the heating is good or good warm
- I feel that the radiator is good, because: First, without too much pressure can be heated, that is, as long as the supply is not more than two floors, or is not a waste of waste In many cases, do not need to install a circulating pump, the money can be saved. Second, the maintenance is simple, if the parts are broken, you can directly replace, not like to warm, if the warm tube or which parts are broken, you have to plan the ground, both trouble, and costly. Third, the radiator is not easy to plug. To warm, if the water quality is very easy to block.
- Q:You are registered or heating works basically useless...
- Home wall boiler attention to what the use of boiler concerns...
- Q:What is the working principle of air source heat pump and what is it?
- Air source heat pump: air energy (source) heat pump, as a heat pump technology, a "natural energy porters" reputation, with the use of low cost, easy operation, heating effect is good, safe, clean and other multiple advantages. The energy in the ubiquitous air as the main driving force, through a small amount of energy to drive the compressor operation, to achieve energy transfer, without complex configuration, expensive water, recharge or soil heat transfer system and dedicated room, to gradually reduce the traditional Heating to the atmospheric environment to bring a large number of pollutant emissions, to ensure the effectiveness of heating while taking into account the purpose of energy conservation and environmental protection. The air source (source) heat pump is driven by the motor. Working principle: Steam compression refrigeration cycle Operating principle, the ambient air is cold (hot) source to produce cold (hot) wind or cold (hot) water equipment, the main zero Components include hot side change equipment, heat source side heat exchanger equipment and compressors. The air energy source heat pump uses the heat in the air as a low temperature heat source, through the traditional air conditioner in the condenser or evaporator for heat exchange, and then through the circulatory system, extraction or release of heat, the use of unit circulation system to transfer energy to the building To meet the needs of users on the hot water, to warm or air conditioning. Air source heat pump technology is based on the inverse Carnot cycle principle to establish a kind of energy saving, environmental heating technology. Air source heat pump system through the natural energy (air heat storage) to obtain low-temperature heat source, the system after the integration of high-temperature heat collector, used to take (for) warm or supply of hot water, the whole system heat collection efficiency is very high.
- Q:What is the geothermal decoration process?
- First to do the original ground leveling, and then covered with insulation materials, the top of the laying of warm water pipes, and then laying a layer of insulation materials, and then above the mortar leveling
- Q:What kind of equipment is the protection of the fan coil in the ground source heat pump?
- Ground source heat pump systems are durable and highly reliable. Contains less mechanical parts, and all mechanical parts are not buried in the ground is installed inside the house, which makes the equipment from external damage. Underground buried pipeline has 50 years of service life. Ground source heat pump system is very quiet, so that the environment inside and outside the house are very pleasant. Ground source heat pump system is no noisy fan equipment, whether in the courtyard or near the courtyard, will not affect the outdoor activities. Ground source heat pump system is safe and reliable. Since no instruments are exposed to the outdoors, children or pets are protected from damage and damage to external equipment. Ground source heat pump systems do not have open flames, flammable fuels or potentially hazardous fuel storage tanks. Plumbing geothermal is closed through the water under the floor of the cycle to the temperature of hot water to increase the temperature of the indoor temperature, do not close the doors and windows, and the head of hot head in line with human health, the body is very comfortable.
- Q:Home to install 400 atmospheric boiler on the first floor, to the second floor for the warm
- With hot water pump, cold water pump not.
- Q:How to use the Beretta boiler
- Any boiler before starting the machine to pay the water to see if the water pressure gauge pointer is between 1 - 1.5bar. If the water pressure in the above range, open the gas pipe valve, power on, set the machine in the winter position, set the heating temperature, usually the upper limit of the floor heating temperature can be set to 55- -60 degrees Celsius, radiator heating up to 75-85 degrees Celsius (if the radiator is not anti-hot protection, it is best to set the temperature a little lower). After normal ignition do not have to ignore it. Bath: see the water pressure gauge pressure is normal, open the gas valve, power on, set the machine in the summer position (if it is winter, that is set in the winter position), the hot water temperature is set at 42-45 degrees Celsius Between, open the hot water head, until the water temperature is appropriate and stable after you can start bathing. Antifreeze: water pressure gauge pressure is normal, the machine power plug (do not boot), the gas path open (must ensure that the gas source) can be. The above operation applies to Faroe, Haas, Ariston, Bosch, Squirrel, Beretta and other brands of boiler
- Q:Now has decided to install the water to warm, but do not know what brand of boiler boilers
- Done the industry are aware of the water to warm the boiler core components like fans, pumps, burners these, the world is so few manufacturers to produce, like computers and mobile phones, just that the circuit board and shell is their own production design, famous A little of the boiler manufacturers are buying that a few manufacturers. So you buy homemade and buy no difference between the foreign, small squirrel is the domestic industry to do a good job, the original import to buy, but the price is not that flower floating lamb spring coins cut Tong public Kunming some foreign brands expensive....
- Q:What kind of material does the radiator have? Which is the best, thank you
- The radiator has iron and advanced ceramic, the current ceramic is better, just the price of your point.
- Q:Household gas boiler classification
- According to the installation method can be divided into wall-mounted gas boiler (balanced, power 20kw-36kw-based, high integration, the first choice), landing gas boiler (atmospheric, power 50kw above, suitable for villas, most need independent boiler room, auxiliary Is independent), wall-mounted and can be divided into board replacement and casing machine. Plate replacement machine high comfort, the price is slightly higher, casing machine cheap, of course, spare parts are also cheap. Above these are the main types, as well as condensing boilers, module boilers, these do not have access.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range