Product Description:
Detailed Product Description
access equipment--30m
Working height:32.1m (105ft)
Platform height:30.4m (100ft)
Platform capacity:480kg (1056lbs)
| access equipment--30m Sinoboom GTBZ30 |
| | |
| Productivity |
| Working height | 32.1m (105ft) |
| Platform height | 30.4m (100ft) |
| Horizontal reach | 22.9m (75ft) |
| Platform capacity | 480kg (1056lbs) |
| platform rotation | 160° |
| Gradeability | 42% |
| Driving speed | 4.4km/h |
| Volume |
| Length--Stowed | 13m (43ft) |
| Width--Stowed | 2.49m (8ft) |
| Height--Stowed | 3.08m (10ft) |
| Platform size | 2.44*0.91m (8*3ft) |
| 1.83*0.76m (6*2.6ft) |
| Wheelbase | 3.66m (12ft) |
| Ground clearance | 0.43m (1.4ft) |
| Tire | solid |
| Weight | 2WD--18.5T (40700lbs) |
| | 4WD--18.67T (41076lbs) |
| Power |
| Power source | Commins/Perkins/Lovol/Yuchai |
| Auxiliary power unit | 24V DC |
| Hydraulic tank capacity | 170L |
| Fuel tank capacity | 125L |
- Q:4 meters high buried, the wall is more than 2 meters high, the pool diameter of 18 meters in the middle of the column above the top to cap
- The problem is too high, but the Google First, the project overview Sewage treatment South Station 1000 cubic meters of clean water pool is xxxxxxx company xx area supporting facilities engineering, we contracted the cave of civil works
- Q:How do you break the window with a glass knife? The
- Windows are tempered glass, take a glass knife does not account for any big advantage, in the edge of the glass tapping that is broken. If the window is closed, only with a pointed hard knock, not called fragile. Casually smashed on the more difficult.
- Q:Do not suggest me to find carpenter and the like, I want to do it myself! Draw a simple map, because it is renting the house, so there is not much budget, all with the cheapest material can be used, but I do not understand those who professional. I would like to know what materials need to buy, board nail glue ah what, and do need to pay attention to what the focus, the approximate steps is how? First link which part of the door how to get. Thank you, everyone ~ ~ ~ answer is good, then I add points ~ ~ ~ ~ PS: drawing with pictures, two tubes fixed, the middle is the position of the wash basin, this can not change. If the above board put up how to pull the eyes of the pipe ah?
- I have seen how people assembled before, first from the bottom up the assembly sprinkle First inside behind The need for tools: hand-held woodworking push (with a large core board nail a table, the saw can be installed in the following can be saw), drill (drilling), nail hammer, tape, these tools if you just casually Under the words, I see you go to the secondary market to buy the old can be used, I bought, economical and practical, Oh ~ ~ ~ ~ cost about 300 yuan or so, but you have to bargain material: plate (better 110 yuan / Zhang, cheap 70 yuan / Zhang, this will see you), PVC edge of the article (60 yuan volume), Wan Nengjiao (edge with), the cabinet bowl pull blue 120 yuan / sets, seasoning Pull the blue 95 / sets (these two you want to buy the words, to say that the kind of stainless steel thick) and then some small accessories are: hinges, door handles, rails, hangers, screws or something, you should know, Ha ha The The
- Q:To write an internship report ah. Trouble to help the next busy. Can also help me find a commercial space research
- The restaurant is decorated with great flexibility and can be decorated in different styles according to the hobbies of different families and the specific living environment, creating a variety of atmosphere and atmosphere, such as continental style, country style, traditional, simple, modern and other restaurant decorations style
- Q:Brief introduction of CNC machine tool CNC device hardware, software composition.
- CNC system generally by the input and output devices, numerical control devices, programmable controllers and other components. 1. The input / output device input device can transmit different processing information to the computer. In the early days of the production of CNC machine tools, the input device for the perforated tape, has now become out; at present, the use of the keyboard, disk, etc., greatly facilitate the information input work. Output refers to the output of internal operating parameters (including the machine is normal, the ideal working conditions of the original parameters, fault diagnosis parameters, etc.), the general work in the machine just to output these parameters for record and save, to be a period of time, then the output and the original Data for comparison, control, can help determine whether the machine work to maintain normal. . numerical control device (CNC) numerical control device is the core of CNC machine tools and lead, to complete all the processing data processing, computing work, and ultimately the NC machine tool functions of the command work. It contains microcomputer circuit, a variety of interface circuits, CRT monitors and other hardware and the corresponding software. . the programmable controller that PLC, it is the spindle unit to achieve control, the program speed command to control the spindle speed; management tool library, automatic tool exchange, the election method, the cumulative number of tools, tool life And the number of tool grinding and other management; control the spindle reversing and stopping, quasi-stop, cutting fluid switch, chuck clamping release, the robot handle knife and other actions; also on the machine external switch (limit switch, Control switch, etc.) to control the output signal (knife, robot, rotary table, etc.) to control.
- Q:What is the difference between cement mortar mixer and cement paste mixer?
- automatic: the knob switch to the automatic position, press the program controller to start the button, that is automatically completed a low speed 30 seconds - and then low speed 30 seconds, while the automatic sand - high speed 30 seconds - stop 90 seconds - high speed 60 seconds - stop the rotation of the working procedures
- Q:I would like to ask what is the cloth cloth cloth cloth? There is the kind of cloth on the cloth is what kind of dye or paste? Where some sell? Thank you
- the first cutting machine to adjust the half-engraved function (available Wentai 2000 software) the composite Transfer paper through eight nine into the depth, with a knife to pick out the text ----- If the word is too small, too many handwriting, please use the adhesive stick, the transfer paper stick to the end of the paper on the lettering (method and engraved stickers the same) Transfer: Transfer paper and blank banners are laid together, with a colored side facing the cloth, heated by a thermal transfer banners with a pressing force, and the color of the contents of the thermal transfer paper is moved to the blank bar, Thus forming a banner of content Adjust the angle of the table and the heating tube: first transfer the fabric into the transfer machine empty 30 meters long, if the cloth to the left side of the slope, please put the end of the table (put a roll) to the left slowly Adjust until the cloth goes positive vice versa Should pay attention to prevent the transfer of Yin words when the Phoenix tail: transfer, with both hands with paper, a little hard to transfer paper as far as possible after the band (if necessary, later brought to the transfer paper and roll and other vertical groove ) Until the entire banners are finished Make a lottery with a thin polyester taffle material, please transfer a cloth under the white paper, so as not to color transfer to the blanket
- Q:Test block check the order of time for the first to send cushion after the test block to send those test blocks
- According to the batch of concrete pouring, 100M3 non-mass concrete standard batch of a test block and other provisions of the inspection, the order of inspection according to the order of construction ah; such as pile core concrete test block, brick mold mortar test block, floor Test block (such as the wall on the anti-500 high and the floor of the different height of the inspection should also be a separate) ...
- Q:How to play the collapse of the mainland _ collapse of the mainland novice Raiders
- Bounced a long time the monster chaos big collection game "crash the continent" (Crashlands) finally landing iOS platform friends
- Q:This is my war Roman and Cartier combination of playing skills
- The most classic version of the legendary version of the game, multiplayer battle cross-service competition play Fen battle, ten years the most classic game, heroes hit, 3D special effects gorgeous, quickly try to play about
Focusing on market demands and technical innovation, our company is developing, guided by the globalized strategy, as the one who enjoys growth rapidly and steadily.
The foundation is on Credit and Honesty.
The way we go is driven by innovation.
The pursuit of excellence is consistent and continuous. We build values for customers and partners, opportunities for employees, and long-term benefits for investors.
1. Manufacturer Overview |
| Location |
Hunan,China (Mainland) |
| Year Established |
2008 |
| Annual Output Value |
Above US$100 Million |
| Main Markets |
South America 26.68 %
Eastern Europe 0.92 %
Southeast Asia 9.66 %
Africa 0.64 %
Oceania5.52 %
Mid East 14.72%
Eastern 1.38 %
Western Europe 0.46%
Northern Europe 0.46%
South Asia 2.76 %
Domestic Market 36.80% |
| Company Certifications |
ISO9001;Sinoboom Self-patent Cetification;Type Approval Certificate--GTBZ38;Type Approval Certificate--GTBZ36 |
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
31% - 40% |
| No.of Employees in Trade Department |
Above 50 People |
| Language Spoken: |
English, Chinese, Spanish, German, French, Russian, Korean, Italian |
| b)Factory Information |
|
| Factory Size: |
50,000-100,000 square meters |
| No. of Production Lines |
Above 10 |
| Contract Manufacturing |
OEM Service Offered |
| Product Price Range |
HIGH |
