Handicap Elevators For Homes

Hot Products

Building hoist SC100/100 Best quality Construction Machinery

Reliable control system building hoist SC200/200BP

Building Hoist Hot Galvanizing Mast Section Sales with 5.4ton Capacity

Building Hoist SCD200 with Counterweight

Precise assembly and accurate drive building hoist SCD200/200B

Building Hoist European Standard Electric Parts with 2.4ton Capacity

Building Hoist Mast Section Manufacturer with 3.2ton Capacity

Building Hoist Sales Galvanizing Mast Section With 33m/min Fixed Speed

Building Hoist Mast Section Manufacturer with 4ton Capacity

Building Hoist SC200/200 with 50m Height

FAQ

How do construction suspension scaffolding be handled in the people's elevator?

Suspension of steel and steel is used to avoid the elevator, and it is OK to encrypt it on both sides of the elevator

How many kw is the sc construction elevator

There is no fixed standard, which is widely adopted, 3X11KW, which is 33 kilowatts. The power of the motor is determined by the speed ratio of the decelerator. The most common lifter is 33 kilowatt, the speed ratio 1:16, 33 meters per minute.

The working principle of construction elevator

How the elevator works: The main bearing structure is self-formed system, which is low on construction. It more driven by force, drive devices are installed on the hanging basket, through the gear and rack drive system, the mutual cooperation, so as to realize the rise and fall of the elevator.

How is the construction elevator installed

The construction elevator should choose a good position first, do the elevator foundation, at the same time make the wall in the setting process. This one has the corresponding elevator basic drawing, should the professional personnel carry on setting up and disassembling.

Construction elevator positioning should consider which problems

The construction elevator is short for construction. It is an important equipment in high-rise building construction, and construction site accident hazards easily, because it can cause many major accidents, injuries in the inspection should be listed as a key to check the content. Based on past accidents and on-site inspections, we often find topics that we think should be examined in a critical area

Safety device for construction elevator

1. The governor To prevent the hanging basket construction elevator overspeed or fall and set up a safety device, is divided into a unidirectional and bidirectional type two kinds, the one-way speed limiter can only along the direction hoisting cage falling within the speed limit, two-way speed limiter can up and down along the hoisting cage speed effect on two directions. The speed limit shall be tested for performance in accordance with the prescribed time limit. 2. The buffer spring Buffer spring in spring seat connected to the base frame, so that when hanging cage fall accidents, reduce the impact of the hanging basket, at the same time ensure crane cage and weight drops landed into flexible contact, slow down the hoisting cage and the impact of weight landing. The buffer spring has a cone winding spring and a cylindrical spiral spring. Usually, there are two or three cone coiled springs or four cylindrical coils on the base of each cage.

Should a fire extinguisher be equipped in the construction elevator?

The temporary building area shall be equipped with fire equipment according to the regulations. In general temporary facilities, each 100m2 is equipped with two 10L extinguisher. If the total area of a large temporary facility exceeds 1200m2, there shall be a special service for fire fighting, such as taiping pail, water bucket (pool), and huangsha ponds, etc. No items shall be piled up around the facilities. Between temporary carpenter's room, paint room, wood and machine tools, each 25m2 should be equipped with a suitable extinguisher. The oil depot and dangerous goods warehouse shall be equipped with sufficient quantity and type suitable extinguisher.

What is the meaning of double straps in the construction elevator?

One component of the elevator's drag system is the weight of the car. The other side of the car is connected to the top of the car by dragging a wire rope. It can be used for the energy saving of the elevator towing system, because the elevator load optimization is calculated by the theory calculation. The elevator should be calculated before the weight is weighed: the calculation principle is that the weight is equal to the weight of the car and half the load.