2Inch Centrifugal Pump(Gasoline Pump) for Irrigation Industry
- Ref Price:
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 10000 set/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
1.Specifications of 2Inch Centrifugal Pump
• Gasoline water pump
• Compact and portable
• High efficiency, low emission
• OEM/ODM
• Good quality and service
2.Main Features of 2Inch Centrifugal Pump
• Large fuel tank for hours of continuous operation
• Aluminum alloy high pressure casting compact in structure and light weight
• Qualified mechanical seal device
• Self-suction structure
• Wide option range in bore size from 2 to 4 inch
• Recoil Starting and Electric Starting are both available for choice
Dewatering Pumps Dewatering pumps are your standard gasoline water pump.Their job is to remove water and displace it somewhere else. Dewatering pumps are commonly used to empty hot tubs, drain ponds or move other types of clean water. With gas-powered engines, these pumps can move a lot of water in a hurry. If you need to pump water with debris or solids in it, you'll need to look to a trash pump instead |
Sewage/Trash Pumps
High-volume , self-priming centrifugal trash pumps come standard with a ductile iron impeller to resist abrasion and "T" handles for easy cleanout. All pumps feature stainless steel internal hardware, iron wear parts, built-in check valve, suction stainer and heavy-duty steel frame. Standard with male NPT threads.
WARNING: Do not use in explosive atmosphere or for pumping volatile liquids. |
3.Technical data of 2Inch Centrifugal Pump
GASOLINE WATER PUMP | ||||||
Model | WP15 | WP20 | WP30 | WP40 | WP20H | WP30S |
Name | Gasoline Engine Self-Priming Water Pump | High Pressure pump | Sewage Pump | |||
Max.capacity(L/min) | 400 | 600 | 1000 | 1600 | 500 | 1300 |
Total head(m) | 30 | 32 | 28 | 25 | 50 | 26 |
Suction(m) | 6 | 8 | 8 | 8 | 8 | 8 |
ENGINE | ||||||
Model | KG156 | GX160 | GX270 | GX160 | GX200 | |
Max. Output(HP) | 4-Stroke,25°inclinde,single cylinder with air-cooled | |||||
Bore*Stroke(mm) | 54*38 | 68*54 | 77*58 | 68*54 | 68*54 | |
Displacement(cc) | 87 | 163 | 270 | 163 | 196 | |
Comperession ratio | 5.5:1 | 8.5:1 | 8.2:1 | 8.5:1 | 8.5:1 | |
Max. Output(HP) | 3.6/3600 | 5.5/3600 | 9/3600 | 5.5/3600 | 6.5/3600 | |
Ignition System | Non-contact transistorized ignition(T.C.I.) | |||||
Starting System | Recoil Starting/Electric starting | |||||
Muffer | Half-dry,double-strainer | |||||
Fuel Tank (L) | 1.7 | 3.6 | 6 | 3.6 | ||
Oil Capacity (L) | 0.4 | 0.6 | 1.1 | 0.6 | ||
PACKING | ||||||
Max. Output(HP) | 440*330*350 | 485*385*390 | 510*385*425 | 630*460*500 | 540*385*425 | 540*385*425 |
Net Weight(kg) | 16 | 28 | 31 | 47 | 30 | 34 |
GASOLINE WATER PUMP | ||||||
Model | WP15 | WP20 | WP30 | WP40 | WP20H | WP30S |
Name | Gasoline Engine Self-Priming Water Pump | High Pressure pump | Sewage Pump | |||
Max.capacity(L/min) | 400 | 600 | 1000 | 1600 | 500 | 1300 |
Total head(m) | 30 | 32 | 28 | 25 | 50 | 26 |
Suction(m) | 6 | 8 | 8 | 8 | 8 | 8 |
ENGINE | ||||||
Model | KG156 | GX160 | GX270 | GX160 | GX200 | |
Max. Output(HP) | 4-Stroke,25°inclinde,single cylinder with air-cooled | |||||
Bore*Stroke(mm) | 54*38 | 68*54 | 77*58 | 68*54 | 68*54 | |
Displacement(cc) | 87 | 163 | 270 | 163 | 196 | |
Comperession ratio | 5.5:1 | 8.5:1 | 8.2:1 | 8.5:1 | 8.5:1 | |
Max. Output(HP) | 3.6/3600 | 5.5/3600 | 9/3600 | 5.5/3600 | 6.5/3600 | |
Ignition System | Non-contact transistorized ignition(T.C.I.) | |||||
Starting System | Recoil Starting/Electric starting | |||||
Muffer | Half-dry,double-strainer | |||||
Fuel Tank (L) | 1.7 | 3.6 | 6 | 3.6 | ||
Oil Capacity (L) | 0.4 | 0.6 | 1.1 | 0.6 | ||
PACKING | ||||||
Max. Output(HP) | 440*330*350 | 485*385*390 | 510*385*425 | 630*460*500 | 540*385*425 | 540*385*425 |
Net Weight(kg) | 16 | 28 | 31 | 47 | 30 | 34 |
4.FAQ
①What is your M.O.Q of this item?
20FT for a order
②How to guarantee the quality of the products?
We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q:What are the problems that should be paid attention to when using vacuum pumps?
- (14) vacuum pump used in the winter season, after stopping the pump body, lower drain plug unscrew medium on the net. To prevent cracking.(15) the vacuum pump has been disabled for a long time. All the pumps should be taken apart and dried. The rotating parts and the joint should be coated with grease and properly preserved.
- Q:What is the liquid pump? What are their categories? What are their strengths and weaknesses?
- The pump is constructed by connecting large diameter gas piston with small diameter hydraulic piston. The two piston area ratio produces a pressure ratio, and the maximum output pressure can be calculated by the pressure ratio. High pressure ratio produces high outlet pressure. You can set the outlet pressure through a simple gas pressure reducing valve. Pressure ratio * gas drive pressure = output pressure.
- Q:Advantages and disadvantages of centrifugal pumps?
- Centrifugal pump; advantages and disadvantages:(1) advantages:The structure of the pump is simple and compact, and the centrifugal pump has small area, light weight, little material consumption and high cost for the foundation. Therefore, the cost of manufacturing and installation is less.For high speed operation, the 2 pole or 4 pole motor can be directly connected. The drive structure is simple and easy to install.
- Q:Why does the centrifugal pump close the pressure to start?
- The motor power is selected according to the rated flow of shaft power points plus 15 to 25%, if the outlet valve is fully open to start, the pump flow may deviate from the amount of fixed lot, pump efficiency also reduces a lot, resulting in shaft power greater than the motor power caused by tripping even burned electric machine.
- Q:Piston filling and peristaltic pump filling which precision is high?
- If the unit area is large, the accuracy of the plunger is certainly not high. The peristaltic pump is used by means of extrusion roller extrusion pump to promote the solution, this also depends on the unit cross section size, the same motor accuracy is very important.
- Q:What is a feed pump?
- Because under normal circumstances, the water pump suction port flow rate is low, can not meet the requirements of high pressure water injection pump. Therefore, the purpose of adding a feeding pump at the front of the water injection pump is to increase the flow rate of the inlet of the high-pressure water injection pump so as to meet its water supply requirements!
- Q:Fire pump and shower pump flow head selection, high resolution.
- 3, larger than 25000, the minimum water consumption of indoor fire hydrant is 20L/s4, the minimum water consumption is the flow of a fire hydrant.
- Q:Suction stroke and lift of water pump
- For example: there is a kind of water pump, the model is called "BSP" series, the volume is not large, but the nominal suction process can be 4 meters, it can not add water to 4 meters, it is considered to be relatively high in the micro pumpIn micro pumps, not all pumps have self-priming capacity ("suction stroke")Some centrifugal pumps there is no self-priming ability to use must first do add water. Although some micro pump with self absorption capacity, but "suction" are often the subject of "and the water inlet pipe in all air, can smoke the vertical height of water gap, even only half not so. The pump selection, the absorption process is a relatively important parameter.
- Q:Is the diaphragm pump and the drain pump one?
- Therefore, the need to play a liquid discharge pump, if the medium is corrosive liquid, high viscosity, volatile, flammable, highly toxic liquid, you can choose diaphragm pump. Conversely, the general liquid, there is no special requirements, you can use the general centrifugal pump to reduce costs.
- Q:Centrifugal pumps for normal operation, is it reasonable to install valves on their inlet lines? Why?
- Reasonable, no valve, how to debug, overhaulGenerally installed on imports of valves of relatively large Cv value
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Similar products
New products
Hot products
You Might Also Like