Nut coke of phosphorus 0.045

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1000 m.t.
Supply Capability:
100000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


1. Structure of Metallurgical Coke of Nut coke of  phosphorus 0.045 Description:

Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.

Sulfur content in coke: sulfur is one of the harmful impurities of iron smelting, it lower the quality of cast iron.The sulfur content in pig iron for steel making is more than 0.07% for the trash.By the blast furnace burden into furnace sulfur 11% came from the ore;3.5% from limestone;82.5% from coke, so coke is the main source of sulfur in charge.Coke sulfur content directly affect the blast furnace ironmaking production.When coke sulfur content is greater than 1.6%, sulfur, every 0.1% increase in coke consumption increased by 1.8%, increased by 3.7%, for the amount of limestone ore content of 0.3% by 1.5 - a 0.3% increase in the blast furnace production. The sulfur content of metallurgical coke is not greater than 1%, large and medium blast furnace using the sulphur content in metallurgical coke is less than 0.4-0.7%.

2. Main Features of the Metallurgical Coke of Nut coke of  phosphorus 0.045:

• Quality assurance

• Mutual benefit

• Preferential price

• Various choice

3. Metallurgical Coke of Nut coke of  phosphorus 0.045 Images:

 

Nut coke of  phosphorus 0.045

Nut coke of  phosphorus 0.045

Nut coke of  phosphorus 0.045


4. Metallurgical Coke of Nut coke of  phosphorus 0.045 Specification:

 

Parameters

Guarantee

Rejection

Total Moisture (As received basis)

5% max


Ash (dry basis)

12.5% max

13.5%

Volatile Matter (dry basis)

1.5% max

> 1.8%

Sulphur (dry basis)

0.65% max

> 0.75%

Phosphorus (dry basis)

0.035% max

> 0.045%

M10

7% max

9%

M40

84% min

82%

CSR

65% min

63%

CRI

25% max

27%

Size 30-90 mm 

90% min


+90 mm

5% max

8%

-30mm

5% max

8%


5. FAQ

Coke ash content: coke ash content on the influence of blast furnace smelting is very significant.Coke ash content increased by 1%, the coke rate increase 2-2.5%, therefore, lower coke ash content is very necessary.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How much coke is needed for a ton of iron
Blast furnace production is continuous. A generation of blast furnace (from start-up to overhaul shutdown of generation) to continuous production of more than ten years. The production, from the top (usually roof is composed by Bell and hopper of modern blast furnace is the valve bell and bell less top) constant load of iron ore, coke, flux, from the lower part of blast furnace tuyere blowing hot air (1000 to 1300 degrees Celsius), sprayed into the oil, coal or natural gas. Fuel
Q:What is the reasonable ratio of coal to coke
According to the proportion of each unit type, different operation, different existing coal and different coke quality requirements are different and so on, can be said to suggest that the landlord can look at the altar of the myriads of changes, in some aspects of the coal blending, grasp some general principles, and then develop the proportion according to the actual situation.
Q:How coal is turned into coke in the coking chamber
Simply put is to let the coal in the isolated air furnace heating, volatile volatile, and the rest is cokeOf course, the volatile ingredients to be collected, are the baby
Q:Coking coal, coke, coal, steam coal what is the difference?
Coking coal is the raw material for coke
Q:What is the use of petroleum coke
According to the quality can be divided into two kinds of primary and qualified products. Qualified products are divided into six grades. Used in the manufacture of electrodes, calcium carbide, corundum and so on and used as a filling tank, also used as insulating materials and fuel, etc..
Q:Dry or dry carbon carbon, coke or coke, and I do not know which word of
Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
Q:What is the density of coke?
There is also a parameter is also available for your reference: coke porosity of 35% ~ 55%The above parameter is a general range, according to the need to choose to determine.
Q:How easy to use coke barbecue?
Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage.
Q:What is the amount of waste gas produced by a ton of coke burning
The coking coal is heated to 1000 DEG C under the condition of isolated air (high temperature carbonization)
Q:What are the quality indicators of coke
Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%. Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength. The strength of coke is usually represented by two indices of crushing strength and abrasion resistance. Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10 value method, commonly used in our country the German migon drum test. Evaluation of the quality of coke, 1 of sulfur in coke: sulfur is a harmful impurity of iron smelting, which reduce the quality of pig iron. The sulfur content in the pig iron is more than 0.07%. 11% of the sulfur from the blast furnace charge into the furnace comes from the ore, and the other comes from the limestone; the other is from the coke, so the coke is the main source of sulfur in the charge of the 82.5% of the charge. Sulfur content in coke directly affects the production of blast furnace. When the sulfur content in coke is greater than 1.6%, sulfur increased 0.1%, the amount of coke increased 1.8%, limestone amount increased 3.7%, 0.3% increase in amount of ore blast furnace output to reduce the sulfur content under 1.5 - 2.0%. metallurgical coke is not greater than 1%, the use of large and medium-sized metallurgical coke content in blast furnace is less than 0.4 - 0.7%

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range