Nut Coke

Hot Products

Metallurgical Coke of Coke Strength after Reactivity 64

Metallurgical Coke of Coke Strength after Reactivity 64

Metallurgical Coke of Coke Strength after Reactivity 62

Metallurgical Coke of Coke Strength after Reactivity 64

CNBM Nut Coke with Normal Phosphorous

CNBM Nut Coke with Low Phosphorous

CNBM Nut Coke with Normal Phosphorous

Metallurgical Coke of Coke Strength after Reactivity 65

Metallurgical Coke of Coke Strength after Reactivity 65

Metallurgical Coke of Coke Strength after Reactivity 64

FAQ

How to remove the bottom of coke steel

After high temperature sintering, and carbonization of things, glued to the pot, often with chemical methods.The most effective way to do this is by hand:Soak in hot water for a few hours (or a day and night).

What is the difference between coking plant and coke plant

Never heard of coke plant, coking plant is the production of coke products, there are other chemical products, it is estimated that you said the coke plant is the purchase of other people's desire to sell second-hand coke traders.

Mechanism of carbon and coke is not the same as the price which high?

Now, carbon factory has been discontinued, I start the original work - cable maintenance. The first floor of the post is my hair, said all no empty words. A combination of equipment quality is too bad, and Beijing Shougang, cleaning the equipment of large and the fact they are and exactly the same. Beijing is a liar equipment. Zhang Lian do is a donkey trading, factory equipment do Ba Chau are defective, they sold to Beijing fake technology company. I was at his factory inspection equipment of Shougang crooks in the factory. They stay trapped the loss of numerous investors. I now have been unable to recover

Coke indicators are divided into grades

The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke. Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%. Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength

The chemical composition of coke is m10.m25

Quality index of cokeThe quality index of coke coke [] is a solid product of high temperature carbonization, the main ingredient is carbon, is the pore structure has a crack and irregular (or pore porous). The crack number directly affects the coke strength and crushing strength, the index of general degree (refer to how to crack crack length unit the volume of coke in the measure.) to measure the pore structure of the main indicators for the porosity (coke pore volume only percentage of the total volume) that it affects the coke reactivity and strength

Coke boiler belongs to coal-fired boiler

In addition, the utility model is characterized in that the utility model is used for heating and catering industry. Generally speaking, coke boiler belongs to coal fired boiler. Reason is that coke is a coal and fat coal for coke production.

What is the difference between coal and coke, heat, price, pollution, smoke, odor. Thank you experts answer

Coal is the raw material that has not been treated by coking. Not every kind of coal for coke, according to the different requirements of the different kinds of coal

What are the criteria for coke classification and how to distinguish between primary and two grade coke?

4, coke in volatile coke: according to the volatile content of coke can determine maturity. Such as volatile than 1.5%, said coke; volatile matter less than 0.5 - 0.7%, said too much, generally mature metallurgical coke volatile is about 1%.5, the moisture in the coke: water fluctuation will make coke measurement is not allowed, thus causing the furnace condition fluctuation. In addition, coke moisture will increase the M04 high, M10 low, to the drum index error6, coke screening composition: grain size of coke in blast furnace smelting. It is very important to China in the past, coke size requirements: on the coke oven (1300 - 2000 square meters) of coke particle size greater than 40 mm; medium and small blast furnace coke particle size greater than 25 mm. But some mills tests show that the coke 40 - 25 mm in size as well. More than 80 mm coke to whole, little change in its size range. So the coke size uniform, large gap, small resistance, the furnace is running well.