NUT Coke of 10 --- 30 mm

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 m.t.
Supply Capability:
3000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Structure of NUT  Coke   of  10  ---  30 mm    Description

Coke is a hard texture, with carbon as the main component of irregular porous body, with cracks and defects in silver. The true density is 1.8 ~ 1.95 g/cm3, bulk density is 400 ~ 500 kg/m3, the porosity of 35% ~ 35%,.Coke all vertical and horizontal crack can be seen with the naked eye observation. The vertical and horizontal crack along the thick break, still is focal piece containing micro cracks.

Currently found in the earliest coke in our country, is in Guangdong new will be a unearthed in the ancient ruins in the late 13th century, during the southern song dynasty period in our country. Thus concluded that China's song dynasty, have been used to coke ironmaking. Guangdong new will find coke is also found that the earliest in the world. In Europe, the UK in 1788 began with coke ironmaking, this is the earliest record of western countries, the more than 500 years later than our country.

2. Main Features of the NUT  Coke   of  10  ---  30 mm   

     Quality assurance

     Mutual benefit

     Preferential price

     Various choice

3. NUT  Coke   of  10  ---  30 mm    Images:

 

NUT  Coke   of  10  ---  30 mm

NUT  Coke   of  10  ---  30 mm

NUT  Coke   of  10  ---  30 mm

NUT  Coke   of  10  ---  30 mm


4. NUT  Coke   of  10  ---  30 mm    Specification:

 

Quality

Quality  guaranteed

Moisture (As receive basis)

7% max

Ash (dry basis)

12.5% max

Volatile Matter (dry basis)

1.5% max

Sulphur (dry basis)

0.65% max

Phosphorus (dry basis)

0.018%max

Size 10—30mm

90%min

-10mm

5%max

+30

5%max


5. FAQ

We have organized several common questions for our clients,may help you sincerely:

1)Main type

Metallurgical coke is blast furnace coke, coke, iron alloy and nonferrous metal smelting with coke. As more than 90% of the metallurgical coke for blast furnace ironmaking, so often called the blast furnace coke metallurgical coke.

Foundry coke is dedicated to cupola molten iron. Coke is the main fuel of cupola molten iron. Its role is hot metal melting furnace charge and overheating, support stock column maintain its good air permeability. As a result, coke blocks should have large, low reactivity, low porosity, with sufficient impact crushing strength, ash content and low sulfur content.

2) Application of coke

     Used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury

     Other non-ferrous metal smelting of blast furnace,

     Reducing agent, compound

     The function of stock column frame.

3) The history of coke

Currently found in the earliest coke in our country, is in Guangdong new will be a unearthed in the ancient ruins in the late 13th century, during the southern song dynasty period in our country. Thus concluded that China's song dynasty, have been used to coke ironmaking. Guangdong new will find coke is also found that the earliest in the world. In Europe, the UK in 1788 began with coke ironmaking, this is the earliest record of western countries, the more than 500 years later than our country.

Although the use of coke earliest in our country, but has not seen through the records. Coking and the earliest recorded with coke can be found in the late Ming dynasty in China side to write the physical knowledge, he pointed out that coal everywhere all have, "smelly burning-out and closed into stone, chisel and charging again yue reef (coke), May 5, fire, cook Fried mine stone, will save Labour". This smelly coal, it is to point to contain volatiles more coking coal, the coal sealed burning-out, becomes hard coke, used for smelting, the effect is very good.




Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:The cost of iron ore and coke
Per ton of iron ore 490 yuan / ton, the use of steel per ton coke of 500 kg, coke per ton of 1250 yuan / ton. You can calculate the proportion of these data
Q:What are the indicators of first grade coke and the two grade coke?
No greater than 12 is not greater than 0.6 not less than 80 not greater than 8 not greater than 1.9
Q:It was concluded that the following two facts: coke can not be used to restore aluminum ore, but can be used to restore copper and iron ore
K, Ca, Na, C, Mg, Al is not able to use C, CO, H2 and so on to restore the preparation of metal, because these metals are very active, can be used to restore copper and iron ore, indicating that the reduction of strong;
Q:With the number of 1 tons of steel smelting coke
Because it can reduce energy consumption and reduce costs. So in the iron and steel enterprises coke rate decreased as the main goal of public relations, all the staff for the blast furnace coke rate reduction efforts. A few data in Liaoning, the average coke rate of Anshan and Benxi, Anshan Benxi is 330kg/t, is 360kg/t, that is to say a pig needs 330 360kg and coke production 2 saddle of the iron and steel enterprises. Shanghai Baosteel coke for the best in the country, can reach about 280kg/t. Is about 280kg per ton iron coke, the national leading level.
Q:What chemical plant used to coke
In order to achieve better technical and economic indexes of blast furnace operation, the coke (metallurgical coke) must have proper chemical and physical properties. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Such as foundry coke, generally require large size, low porosity, high fixed carbon and low sulfur; chemical gasification, strict requirements for strength, but requires good response, high ash melting point; calcium carbide and coke production requirements to improve the fixed carbon content.
Q:What is coke and how is coke classified?
Types of cokeCoke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke, calcium carbide and coke gasification etc.) with coke. The pressurized pulverized coal forming coal, coke carbonization etc. in the new postprocessing process called Formcoke.
Q:The total amount of heat released by the fully burnt 200g coke is 60% by the mass of 10kg water absorption [q coke =3.0 * 107J/kg, C water =4.2 * 103J/ (kg = C)
At a standard atmospheric pressure, the boiling point is 100 DEG C, the temperature of the water rises to a temperature of 100 DEG C, and the temperature will not change,So the water temperature can be increased to 100;Answer: (1) the heat absorbed by water is 3.6 * 106J;(2) after absorbing heat, the temperature of the water will rise to about 100 degrees centigrade
Q:Standard grade two grade coke standard
2, the phosphorus in the coke: iron metallurgical coke coke content should be in the following 0.02 - 0.03%.3, the ash content of coke: Coke Ash on the impact of the blast furnace smelting is very significant. Coke ash increased by 1%, coke consumption increased by 2 - 2.5%, therefore, the reduction of coke ash is very necessary.4, volatile in coke: according to the volatile content of coke can determine the maturity of coke. Such as volatile content is greater than 1.5%, is said to produce coke; volatile less than 0.5 - 0.7%, it is said to be overdone, the general maturity of metallurgical coke volatile is divided into about 1%.
Q:Coke indicators are divided into grades
Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10 value method, commonly used in our country the German migon drum test.
Q:How to calculate the average particle size of coke
Introduction of a commonly used, called "surface area volume average diameter", abbreviated D (3,2):D (3,2) = 1 / (fVI (/DI)).

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range