Full Polished Glazed Porcelain Tile 600 YDLAA222

Ref Price:
Loading Port:
Guangzhou
Payment Terms:
TT OR LC
Min Order Qty:
1267.2
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Brief Introduction

 

Full Polished Glazed Porcelain Tile 600 YDLAA222 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.

 

Product Features

 

  Polished Porcelain Tile, Double Loading

  Only Grade AAA available

  Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

  Fast delivery

  OEM service could be offered

  Marketing support on samples, catalogues as well as carton designing

  Professional sales team for product, document and schedule of importing and exporting.

 

Product Specification 

 

  Tile Type: Polished Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Breaking Strength: 1800 N

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

  For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl


Material

Porcelain

Dimension

600x600 mm

Packing

Carton + Wooden Pallets

Finish

Glossy, over 90 degree.

Usage

Floor and wall

The polished porcelain tile is widely used for interior houseflooring, hotel lobby flooring, shopping mall as well as other public sites.

Vivid stone texture and vein bring our decoration the naturalstone beauty with much lower cost, easier quality control and easier decorationproceeding.

Advanced glazing technology to make sure the tile surface beautyvivid and clean, via ink-jetting or silk printing.

We could go with OEM model, making 2nd productionbased on clients requirement;

We could offer flexible service on shipment and better supporton payment term;

Our quality guarantee is based on the strict productionprocedure, quality controlling on the shade, straightness as well as whitedegree.


Production Line & Package 


Full Polished Glazed Porcelain Tile 600 YDLAA222

Full Polished Glazed Porcelain Tile 600 YDLAA222


FAQ

 

1.    For Polished Porcelain Tile, is the 30*60 available?

—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.

 

2.    What is the MOQ for this tile?

—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.

 

3.    Can we use the carton with our own design and brand name?

—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs. 


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:how to install floor tile in a diamond pattern?
If your not overly familiar with doing tile a diagonal isn t the easiest to start on. Lay out and proper tools are a big help in your preplanning. Right size trowel and large enough wet saw and had cutter is a must. Get the longest straight site line and split the room in 1/2 with a chalk line. Lay tile back to the wall and figure the size of pc(pcs) you need. You can cut a few of these pcs as a starting point. Knowing you split the room you should be equal when you get to the other side. A perfect straight edge will help keep your lines straight. Use this on all sides as you build out from that wall and lay as though your doing a straight lay just that your on a 45 degree. Or if you are doing an open ended area , you can cut several tiles in 1/2 and work back. A bit trickier but overall look is better. Don t cut tiles directly in 1/2, you must cut just off center if this is a starting point. Very hard to do and takes experience. Any specific questions you can e mail me through my avatar and check my qualifications there. GL
Q:Do I need to lay backerboard before I lay tile?
If you plan to gut the bathroom then yes rip up the old flooring and put new ply wood down. dont use the good one side ply as the glue you will be using will require something to bite into. but if the plywood you use does have some knot holes then yopu have to use a patch filler before applying the glue. in your case its better to fit the new flooring from wall to wall rather than cutting around the new cabinest. you didnt mention what type of flooring you plan to replace the exsisting flooring with. If you are planning ceramic,porcelin,slate/natural stone then you will not have to se that patch filler. but remember when using any sort of tiles of the above mentioned use a thinset as using any mastic will take a very long time to set. Thinsets will set in 24hrs intile for you to grout the next day. Do keep in mind the temps to lay your tiles down on the back of the boxes of grout.
Q:Best way to update ceramic tile?
If you are dealing with ceramic tile and you sand it, you will see the red clay backing come through. Don't do this. You will wind up replacing the tile anyway. If it is just the grout color you want to change, there is a grout colorant that you can purchase to dye the grout to what ever color you want. If the tile is also dirty, you will probably want to replace the tile as well. You can pull up the old tile, or you could put down a new subfloor and tile over that. Check with your local stores, Lowe's, Home depot, etc. You should be able to find tile at a good price and knowledgable people to help you with the project.
Q:Will cloudiness from sealer finish disappear on ceramic tile?
The cloudiness you see is called blushing--the remedy will depend on the finish that you used. If it a lacquer you can use blush eliminator, I have never tried it on shellac or enamel. It may go away after it is dry however. Sometimes the moisture in the air will cause the finish to blush.
Q:Kitchen Backsplash Tiles?
I would go for a mix, either through the very small tiles, or through a stone that combines tones from all of the above. Given that you have white cabinets and a lot of light greys you don't want to go too dark, but adding some of the burgandy and various shades of gray and beiges would look nice. I like the smaller tiles, not just because they are easier to install, but because there is a lot of variety out there so that you can mix and match easily. They may cost a bit more than something you pick up off the shelf, but in the end it is not that much considering an overall kitch remodel.
Q:Terra cotta roof tiles?
here in the uk we dont use shingles ..not man enough to last ..so we have clay ..concrete ..and terra cotta roof tiles ...no point in putting on a roof covering unless it gonna last at least 100 years ..out roof tiles have hooks at top that sit behind the tile lathe ...most tiles are not actually nailed ..most are every 3 or 5 rows ..i have worked on dozens of roofs where not one was nailed ..the roof angles and tile weight prevent them from moving ..we fix with either galvanised or copper nails
Q:Porcelain tile over ceramic tile?
To go over tile I ve used both Flex Bond and VesaBond thinset made by Custom Building products, Both are usually sold at Home Depot.. One suggestion when tiling over tile, allow a few extra days drying time before any foot traffic on the new tile . Moisture has no where to go when doing this and extra drying time IS required. Do NOT add a latex additive if you use a polymer type thin set, only a latexed based thin set.. No sanding is generally needed, just a clean , oil and grease free tile. Any questions you can e mail me through my avatar and check my qualifications there. GL
Q:i need Porcelain tile advice.?
27 hundred dollars? What the hell are ya going to tile, a football field?..Ok, first I would think twice about not using spacers but that's up to you.. When you buy the tile check for the size notched trowel that's recommended and use it on the concrete floor and flat butter the back of the tile, and use a rubber mallet to tap it firm.
Q:Need To Calculate Number of Tiles To Buy?
you would be able to desire to borrow a tile cutter so which you would be able to shrink tiles to greater healthful into the corners, and an prolonged spirit point (the longer the greater constructive). you in addition to would choose a on the instant wood batten and a few nails. If the area of the tub isn't point, you could restoration the batten to the wall with the nails, and lay your first row of tiles alongside the batten. Then while they're dry and caught good, eliminate the batten and the nails, and glue all your different tiles up against the row you have in simple terms fixed. Then purchase your tiles, some glue, some grout and a few plastic spacers. you in addition to would choose a plastic thingy to coach the glue with (you commonly get one loose once you purchase the glue) Then plan very carefully precisely the place the tiles will bypass, earlier you particularly initiate artwork. you will desire to centre the tiles on the centre of the tub, in different words, the centre of the midsection tile (or, if favourite, the connect between the two midsection tiles) will bypass on the midsection of the tub. restoration your midsection tile(s) first, then pass outwards from there. in case you have a window, you additionally should centre your tiles on the centre of the window.
Q:No of tiles required ...need urgent help?
34: if the comparable variable ison the two components of an equation ought to it have the comparable fee on the two components. clarify. for which equation is x=0 no longer a answer? a: 3x+2=2-x b 2.5x+3=x c: -x+4=3x+4 d: 6x+2=x+2 *i think of its b. am i precise?* sure. What does an equation propose? The x represents some unknown variety or numbers. they ought to be comparable on the two components or you may use a distinctive variable/letter.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range