Cast Iron Submersible Sewage Cutter Pump Sewage Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Cast Iron Submersible Sewage Cutter Pump Sewage Pump
Application
This series pump is widely used for sewage treatment of city construction discharge for architecture projects, hotel, mine, pond, dyeing and printing, paper making and textile industries.
It is the ideal tool for transportation of sludge, slurry, living sewage, feces and stale wastes, solid grains fiber, paper chips, sandy soil etc.
Model Description
100WQ 50-30-5
100: Drain aperture (mm)
WQ: Submersible sewage pump
50: Capacity (m3/hr)
30: Head (m)
5: Power (kW)
Operations Conditions
1. The medium temperature should not be over 60oC, the density 1200Kg/m3, and the pH value within 5-9.
2. During running, the pump must not be lower than the permitted lowest liquid level.
3. Rated voltage 380 V, rated frequency 50 Hz. The motor can run successfully, only under the condition the deviations of both rated voltage and frequency are not over ± 5%.
4. The maximum diameter of the solid grain going through the pump has not to be larger than 50% of that of the pump outlet.
Picture
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
- Q:I am trying to replace my old water pump with a new one. I have the quot;special tooland everything but i just cant get the water pump to come loose at all. Any suggestions would be helpful Thanks
- When you mean it wont come loose, do you mean you cant break the bolts loose or is the pump stuck on the motor like glue? If the bolts are stuck, try spray them with penetrating oil and let it work in for about 30 mins. If the pump is stuck, use a narrow putty knif, gently tap in between the pump and the block, and pry it off, then clean the mating surface completely to ensure the new pump seals properly.
- Q:2 pumps in parallel, lift the same, the pump head is not stacked; 2 pumps in series, the same flow, pump head is not superimposed?.
- 2 pumps parallel, lift the same, pump head is not stacked?;Answer: the head can not be superimposed, that is, a lift and a pump, but the pumping speed (flow) is two times a taiwan.2 pumps in series, the same flow, pump head is not stacked?.Answer: the head can be superimposed, that is, the pump head is two times as much as a pump, but the pump speed is the same as that of a pump.
- Q:30kW what is the flow rate of the pump?
- Estimated traffic: Q = nP/ (9.8H), =70%*30/ (9.8H), =2.14/H (m^3/s)It is estimated that the efficiency of the water pump unit n=70%, power P to kW as a unit, the head H to m as a unit, you go to check the head H is how many meters, into the formula can be considered the flow rate is how many cubic meters per second.
- Q:Okay, I have a 1982 Suzuki Dt8 that someone gave me. But it will not pump water well, when you reve it it will have a little watter shoot out the water outlit, but heres the thing. if you take the cover off be the shift linkage and run the engin it will pump water through just fine
- I've passed on answering your question a couple times, mainly because I'm not sure exactly what you are asking. So let me ask. In the water does the engine overheat? I'm not sure that what you are looking at isn't the relief hole and not the water discharge, which should be under water. How are you supplying water to your engine? Are you running in a barrel? The water pump should be replaced every 2-3 years, so unless you are going to do it yourself, take it to a shop and explain what you are observing. Taking the cowling off will have no effect on the water pump, so I'm guessing you are looking at the wrong place. P.S. This was a common error with Evinrude small motors back in the 70's and 80's, motors similar to yours. The exhaust fin was just behind the propeller. not higher up the leg
- Q:I have a small stream by my backyard where my garden is and I want to use that water so I will need a pump with a hose attachment. What kind of water pump will I need to get for this?
- Approach okorder /
- Q:A pump parameter is the maximum flow per hour 960L, followed by the standard flow of 480 what do you mean?
- The parameter standard of the pump factory is determined by its efficiency, that is, the efficiency of the pump is highest at that point. All parameters have two curves, that is, a flow curve and an efficiency curve. You can according to your standard flow, see how much the efficiency of the point, the maximum flow efficiency is how much will know.
- Q:Water pump "rated lift: 6m" what do you mean?
- Lift refers to the weight of fluid per unit weight after the pump, the pump is an important working parameter, also known as pressure head. Simply stated: rated lift 6M refers to the rated operating conditions of the pump, the increase of energy 6M water column height. Here's an example to help you understand:Example 2-1 the head of a centrifugal pump is now measured. The refrigerant is 20 DEG C water, the measured flow rate is 60m^3/h, vacuum pump inlet meter 0.02Mpa, outlet pressure gauge readings for the 0.47Mpa (g), the two known table between the vertical distance is 0.45M if the suction pipe of same diameter and pipe pressure pump, calculate the pump head.Solution:Check the water density at 20 centigrade 1.0*10e3kg/m3,H=0.45m (1Mpa approximately equal to 100 m water column)P exports =0.47Mpa (0.47*100 m water column, =47 m water column)P imports =-0.02Mpa (0.02*100 m water column, =2 m water column)P is the density of the liquidH=h+ (P -p / P g=0.45+ export import) (0.47*10e6- (-0.02*10e6)) / (10e3*9.887) =50.5m (water)
- Q:ok some one put sugar in my gas tank i had to replace my fuel pump and now i have sludge that's eating th inside of my radiator hoses and my water pump went and of course that's timing driven and my timing belt is awful tight i cant put a finger in between it ....and my car is not car water so i cant drive it and i don't have money to blow to take it to a shop any help u can offer will help and i know i am going to replace my water pump and info for when i do that will help and answers to the sludge (its like a Vaseline) and how to find out if its in my motor or my brand new radiator ? me plz i am a 18 yr old girl with knowledge about cars and have friends to help me and my mom so any helpp will help and is better then none
- If okorder /.. Anyway I hope you have better luck, i'd kill someone if they put sugar in my gas tank. Then again i have a locking gas cap. If you have any questions feel free to im me via yahoo messenger.
- Q:I am planning to build a koi fish pond, and I know I need a water pump. All I know is that a water pump will circulates water. Does it do anything else? does it act like a filter? does it provide aeration or oxygen to the pond?
- Get a pump which could drift, the two with an equipment which you are able to purchase or droop it with an inner tube or on some blocks or the pump will suck up debris from the backside or your lake. Use the biggest pump you have got sufficient funds and be constructive to have a GFI to plug it into. What you want to do isn't consumer-friendly, yet it quite is a possibility. Attaching a hose to the pump intake isn't consumer-friendly. purchase your pump at a plumbing furnish domicile and clarify what you want. they are able to have each and every thing you want and save you countless journeys back and forth to a large container save.
- Q:I have a leak coming from the water pump that flows down on the side of the AC compressor before landing on the ground. I cannot verify exactly where the leak is coming from on the pump, but I am sure it is the pump leaking because it also sounds bad like rattling. My question is do I have to remove any other components, such as the AC compressor to be able to remove the water pump. I would be great full for any suggestions.Regards,Steph
- First you have to mention which E320 you have. It could be either a gasoline or diesel model and the E320 model designation has had the M104 I6, M112 V6, M613 I6 diesel, and M642 V6 diesel under the hood. The water pump is not located in the same place on all engines.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Cast Iron Submersible Sewage Cutter Pump Sewage Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
