Gypsum Ceiling Board Tiles for New Design
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 540000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PVC Laminated Gypsum Ceiling Tiles
Gypsum ceiling tiles is a kind of environmental friendly, light weight, high quality,
fire proof,water proof and corrosion-resistant decorative ceiling board. It’s
made of high quality paper- faced gypsum board with a layer of pvc on surface and aluminum foil on its back.
(Gypsum PVC and aluminum foil are all 100% environmental friendly materials with
character of water proof and fire proof).
Main Characteristic
1.Environment protection product: Adopting natural gypsum material free of any harmful material.
2.Light weight, convenient to transport
3.Sunken proof & Non-dust, Easy clean
4.Good light reflection
5.Corrosion-resistant
Product Name | PVC Gypsum Ceiling Tiles |
Size | Length 600mm / 1200mm |
Width 600mm / 600mm | |
Thickness | 7mm / 7.5mm / 8mm / 9mm / 12mm |
Edge | Square Edge (with tape or without tape) |
Tolerance | Length <±2mm, |
Width < ±2mm | |
Thickness <±0.5mm< p=""> | |
Strength | Over 160N |
Fireproof Class | Class B1 |
- Q:Detailed construction technology
- This is a fixed mode it, learn more like Oh
- Q:Gypsum board ceiling specifications which are detailed
- In general, as far as possible because the ceiling caused by the space is too low and depressed, ceiling layer of gypsum board and the height of the original roof, you can set the height of the lamp to decide, that is just to put down the downlight. Therefore, the height of the first layer (the middle part of the figure) should be selected in advance (because the downlight has a difference in size and length). The second layer in the figure, that is, along the wall of the week, the width of about 400-600mm between. Room span is large, then wide, the room span is small and narrow. The second layer of the middle diagram shows a flood light band, the actual production is a reserved slot, slot edge from the upper layer of gypsum board about 100-200mm, the greater the distance, the more flood light, The less light (but by the brightness of the band). As a result of the first layer of bedding, there is no need to care about the problem can be installed. But the second layer surface from the first layer of the surface between about 150-250mm.
- Q:Gypsum board ceiling seam how to deal with?
- First with a good point of caulking gypsum treatment base, dry, the second treatment again leveling, pay attention to spatula to be flat, and then use a good point of the seaming agent or white latex plus paper bandage bonding, careful not to timely ventilation, To be closed to deal with dry after the beginning to do putty.
- Q:Want to be in the living room and dining room around the kitchen together about 36 square feet. The middle is not hanging. Need to find someone to do it. What materials are needed. Around the ceiling + spotlights + lights with a total estimated how much cost. The Master come Thank you How much money will be budgeted together? The I do not know this is not the middle of the lamp is not included. Just do a four-week ceiling, and spotlights. (You can not buy such a expensive shot, etc.). how much is the total
- Wood keel gypsum board ceiling, you this amount of work, I will be estimated by the big, the process ceiling (that is, around the ceiling), 160 yuan a square, look at the effect of thinking around the bucket lights (two), the price of 120 or so One to count, light with T5 lights, a set of 1, 2 meters, the price of 50 or so, latex paint 35 a square, the difference between the largest price of the middle of the process, ranging from 300-3000, look at your own bargain. The specific number and area to calculate their own.
- Q:I would like to ask: light steel keel gypsum board ceiling materials and labor costs are how much money?
- You a solid wood door, not understand. Is that kind of? 1, solid wood, open falcon drilling, the kind of door plate? 2, solid wood, outside the panel, parquet line? 3, Blockboard cut the box to do the box, outside the panel, wood line edge? About 450 or so, hanging door press 100 or so.
- Q:Gypsum board ceiling shot hole with what tools drilling, decoration did not give?
- Pistol above the opening with a hole
- Q:My house is a prefabricated board and is a kind of old tile-roofed plaster ceiling can you, life is how much?
- My house is a prefabricated board and is a kind of old tile-roofed plaster ceiling can you, life is how much?
- Q:Bedroom three meters a, beam 40 cm, to cover the beam with gypsum board seal after the left two meters seven high, do modeling smallpox, do fifteen centimeters. High only 2550 meters, and I consult the school teacher said that 2550 meters a little short, but this is the height of the company's designer.
- It is recommended not to do modeling, directly do flat top, install the downlight. This is simple and generous
- Q:I recently remodelled my home and installed new roof - replacing old wooden beams with all steel structure.roof is then corrugated zinc which coated with black tar then topped with red tiles.I live in tropics - now rainy season here the new gypsum ceilings are showing black (damp ?)marks which could be caused by humidty being trapped in ceiling.when ceiling was installed they did not use any insulation could that now be the problem ??I am about ready to move into house before christmas so need to resolve this problem firstand don?t want to lift off roof again or remove ceilings.what could be the problem and how to resolve it ???
- i think its a moisture problem rather than leak probably where wall and ceiling meet you need ventilation attic vents do the trick also house may be sealed to good need a fresh air intake
- Q:Living room size length 5.2 wide 3.5 high 2.75 ceiling width should be designed to be somewhat beautiful? What is the distance from the ceiling to the ceiling? Is the kind of buckle groove, what materials before the production? Do not paint it?
- Woodworking materials: ??? Wood studs (nails and anti-corrosion site production), blockboard (shaped ceiling), paper gypsum board, nails, steel row nails, gas row nails, tapping screws, foaming agent, white latex, preservatives Most of the home decoration) and so on.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Gypsum Ceiling Board Tiles for New Design
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 540000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords