15 Gallon Black Plastic Pots

Hot Products

EPDM Waterproof Membrane for Roof Project

Waterproof Membrane Roll for all Types of Ponds

Hdpe Geomembrane for Aquaponics Construction

2mm HDPE Geomembrane for Pond Liner and Landfill Project

Geocell for Road Construstion and Wall Reinforcement

Geomembrane Waterproof Roll for the Agriculture Industry with High Stabilization and Stabilization

HDPE Pond Liner/HDPE Geomembrane with ASTM Standard

HDPE Geomembrane for Landfill and Waterproof

Waterproof HDPE Geomembrane with ASTM Standard

HDPE Geomembrane Liner for Aquaponics Construction

FAQ

Geomembranes perform well in high-pressure gas containment applications. They are designed to have high tensile strength and excellent resistance to punctures, tears, and abrasion. Furthermore, these membranes have low permeability, which ensures minimal gas leakage and effective containment. Overall, geomembranes are reliable and efficient in maintaining gas containment under high-pressure conditions.

nan

Pressure transmitter is to achieve the control work by the increase or decrease of pressure, when the pressure drop to a point it will start work, and when the pressure is increased to a certain point it stop working.

nan

Civil engineerings. They can be used in projects of seepage control of the landfills, sewage works, landscape lakes, urban roads and of maintenance and of landscape, etc.. Water conservancy engineerings. They can be used in the projects of seepage control of artificial lakes, reservoirs, canals, dams, etc. Highway and railway constructions. They can be used in the projects of tunnel seepage control, road maintenance, railway construction and slope protection, etc.

Yes, geomembranes are generally resistant to algae blooms. The impermeable nature of geomembranes prevents the growth and penetration of algae, making them an effective barrier against algae blooms in various applications such as pond liners, reservoir covers, and wastewater treatment facilities.

nan

Forming characteristics: 1. It is an amorphous material with small moisture absorption and poor mobility. In order to improve the mobility and prevent the occurrence of bubbles, plastics may be dried in advance. Mold gating system should be thick and short, and the gate section should be large without blind angles. The mold need to be cooled, and coated chrome on the surface. 2. Due to the corrosion and mobility, it is best to use special equipment and mold. All products are required to be added to different types and amounts of additives. 3. It is easy to decompose, and will be more likely to decompose under temperature of 200 degrees and meets steeland copper. And corrosive and pungent gas will escape from it when composition. It has a small temperature range of forming. 4. When using the screw injection nozzle, the aperture should be large to prevent the material is lagged at dead corners. It is best that it has no inserts, and if it has, the inserted parts should be preheated.

nan

Coated glass is made by coating a layer of several layers of metal, alloy or metallic compound thin?filmon ordinary glass to change the glass optical?property and meet particular requirements. For example, heat reflective coated glass has appropriate transmittance for visible light, higher reflectivity for infrared?ray, and higher reflectivity for ultraviolet ray, mainly used in buildings curtain wall glass. low emissivity glass has high transmittance for visible light, high reflectivity for infrared?ray and good heat rejection performance, mainly used in construction and automobiles, ships and other means of transport. Because the film has poor strength, it is generally made of hollow glass. Conductive film glass can be used to heat, defrost, demist glass and as liquid crystal displays.

Yes, geomembranes can be used in irrigation canal lining. They provide an impermeable barrier that prevents water seepage, reducing water loss and increasing efficiency in irrigation systems. Geomembranes also help in controlling the movement of chemicals and contaminants, ensuring water quality.

nan

1. The carbon film resistor is made by depositing crystallize carbon on a ceramic rod framework. Carbon film resistors have low cost. Stable performance. Wide resistance range. It has low temperature coefficient and voltage coefficient, is the most widely used resistor at present. 2. The metal film resistors. Coating the alloy material on the surface of the ceramic rods framework by vacuum evaporation . Metal film resistors have higher precision, good stability, and low noise and temperature coefficient than carbon film resistors, thus is widely applied in the instrumentation and communications equipment. 3. Metal oxidation film resistors is made by deposited a metallic oxide layer on the insulating rod. Because it itself is an oxide, it is stable at high temperature and thermal shock resistance with strong load capacity. 4. The synthetic membrane resistor is made by coating the conductive composite suspension liquid on the substrate, therefore, it is also called paint film resistor. Due to its grainy structure of the conductive layer, it produces a lot of noises, and has low precision. It is mainly used in the manufacturing of high pressure resistance and small resistors.