Welding Electrodes Rods of AWS E6013 High Quaity Factory Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
1.Structure of Welding Rod Descrition
1.Sheet metal
2.Irregular short welds that change positions
3.Maintenance or repair welding
4.For use with small AC welders with low smoke
2.Main Features of Welding Rod
• All-position electrode for the welding of mild steel.
• Excellent choice for sheet metal lap and fillet welds
• Easy slag removal. low smoke.
3.Welding Rod Images
4.Welding Rod Specification
Mechanical Properties of Deposited Metal
Test Item | Rm(MPa) | ReL(Mpa) | A(%) | KV2(J) | KV2(J) |
Guarantee Value | ≥420 | ≥330 | ≥17 | -(normal temperature) | -(0℃) |
Reference Current (AC, DC)
Electrode Diameter(mm) | φ2.0 | φ2.5 | φ3.2 | φ4.0 | φ5.0 |
Length(mm) | 300 | 300(350) | 350 | 400 | 400 |
Welding Current (A) | 40~70 | 55~95 | 80~130 | 120~180 | 160~230 |
V-up, OH | 35~60 | 45~90 | 60~120 | 100~160 | 120~200 |
5.FAQ
Q:Are you factory?
A:Yes, we are factory not shell company. So we can promise good prices and best quality. Welcome you to visit our factory.
Q: What's the delivery time?
A: For products in stock, we can ship it within 7 days after receiving your payment. For custom order, within 24 tons, production time is 20-30 days after confirmed every details.
Q: What about the warranty?
A: We are very confident in our products, and we pack them very well to make sure the goods in well protection.
- Q: What are the characteristics of SHJ507 welding rod?
- SHJ507 is J507, and the SH in front represents only the manufacturer.J507 is a low sodium hydrogen electrode, it is a kind of basic electrode, welding steel structure can be typical of Q235 steel, the tensile strength of E4315 is much larger relative to the common electrode, so the general welding force or under dynamic load of steel structure.J507 welding rod diameter ranging from 2.5mm to 6.0mm, can be carried out in all position welding, welding using DC welder, polarity reversal. Of course, if there is only AC welder in the field, AC welder can be used, but the current needs to be switched on.The weld formation after J507 welding is more difficult than that of the acid welding rod. If an electrode is used on the cover of the steel structure, the acid electrode can be used.Chemical composition of deposited metal (%)
- Q: What welding rod should be used for welding between No. 20 and No. 45 steel?
- J427When welding, pay attention to the small current at the bottom, and the weldability of No. 45 steel is poor
- Q: Types of electrodes
- Ask me, the welding rod according to the diameter commonly used has 2.5, 3.2, 4. According to the use of ordinary, stainless steel, cast iron, wear-resistant electrode. Among them, the ordinary electrode according to grade 422506 and 502, stainless steel 102, 132, cast iron points 302, 402. Electrode wear is generally used in digging bucket, carbon and some high wear resistant. These are commonly used welding rod, and some special electrode, the amount is very small. Generally speaking, the higher the grade of the electrode, the more expensive the price. Little dragon, what else do you know? Ask me!
- Q: What does "E7016" mean? What should I pay attention to when welding? Can I weld the pressure vessel (pressure 1Mpa)?
- The electrode E7016 is American Welding Society AWS grades, the tensile strength of 470MPa, yield strength is 390MPa, the impact toughness of 100J (-50 C) section, the elongation is 30%, and the yield strength and tensile strength of the national standard J507 (E5015), so this electrode can replace J507 (E5015) electrode, is resistant to ultra low moisture absorption hydrogen electrode, excellent low temperature impact properties, using direct reverse, used for all position welding. Look at the electrode welding electrode has not expired, no quality problem, and then the electrode drying (350 DEG C for 1 hours), more than 3mm thick plate to groove, welding parts to rust, water, oil, dirt, can pressure vessel welding Q345R, 16MnDR strength is plate (as for the pressure, according to the the design requirements of 1MPa or greater pressure can be, but the thickness is different).
- Q: Does the welding rod have a shelf life?
- Welding rod has shelf life,The quality index of storage time exceeds a certain time limit, changes in different degree of quality (metamorphic). Various types of electrodes are stored for a long time, and sometimes white crystals are found on the surface of the electrode. This is usually caused by water glass. Packing should be improved to prevent moisture absorption of welding rod and must be properly kept in storage. All kinds of welding rod are seriously deteriorated, and the batch of medicine is seriously falling off. The welding rod should be scrapped.
- Q: What is the cause of partial magnetic blow?
- The magnetic lines of force around the arc may be evenly distributed;2) adjust the dip angle of the welding rod properly and tilt the electrode towards the blowing direction;3) the method of subsection retreat welding and short arc welding can effectively overcome the magnetic deviation blow;4) AC welding instead of direct current welding. When alternating current welding is used, the induced current is induced by the changing magnetic field in the conductor, and the magnetic field produced by the induced current weakens the magnetic field caused by welding current, thus controlling the magnetic bias blow;5) place a ferromagnetic material that produces a symmetrical magnetic field, so that the ferromagnetic material around the arc is uniformly distributed;6) reduce the residual magnetism on the weldment. The residual magnetism on the weldment is mainly caused by the orderly arrangement of atoms and domains. In order to reduce or prevent the magnetic deviation of the magnetic domain arrangement of the weldment, the part of the residual magnetism on the weldment can be locally heated, and the heating temperature is 250~300 degrees centigrade. After production, the demagnetizing effect is good. Moreover, in the residual magnetic field of the weldment, the applied magnet balances the magnetic field.7) reverse demagnetization. That is, a magnetic field is produced by the welding piece to counteract the residual magnetism on the weldment so as to overcome and eliminate the influence of the magnetic deviation blow on the welding arc.
- Q: Welding Q345C steel plate with ordinary electrode?
- Welding Q345C steel plate with ordinary welding rod, that is, 16Mn should use 507, ordinary welding rod welding performance is poor, hope to adopt
- Q: How to use hot 317 welding rod?
- R317 is a low alloy steel welding rod with low sodium hydrogen type. It can be welded in all positions by DC reverse welding, and the welding process is good. The weldment should be preheated to 250~300 DEG C before welding and should be treated at 700~740 DEG C after welding.The electrode (coveredelectrode), is the metal coating in the welding core (coating), uniform centripetal pressure applied to core. The electrode consists of two cores and coating composition. The different cores are also different. The core components directly affect the composition and properties of the weld metal, so the harmful elements in the welding core to as little as possible.
- Q: What kind of welding rod does 1Cr13 steel plate use?
- If used in high temperature situations, G202, but welding is troublesome, preheating before welding, heat treatment after welding, heat treatment should be carried out. If it is not high temperature occasions, A402 austenitic electrode is best. Preheating, welding, heat treatment, heat treatment are not necessary before welding.
- Q: What's the type of electrode used for 304 stainless steel?
- 304 stainless steel is the United States brand, equivalent to the domestic brand 06Cr19Ni10, usually with A102 or A107 welding rod.The selection of reference electrode parent material, selection and composition of base metal electrode in the same or similar; owing to the great influence of carbon content on corrosion resistance of stainless steel, stainless steel weld metal carbon content is higher than that of base material. A102 is Cr19Ni10 stainless steel electrode titanium calcium type coating, corrosion resistance of the deposited metal has good mechanical properties and resistance to intergranular, has excellent welding performance and anti porosity property, anti cracking, red medicine Pinai. A107 is a Cr19Ni10 stainless steel electrode with alkaline coating. The deposited metal has good mechanical properties and intergranular corrosion resistance. Therefore, they are aimed at 304 development of welding electrodes.
Send your message to us
Welding Electrodes Rods of AWS E6013 High Quaity Factory Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
