Q:What is the effect of coke moisture on the blast furnace?

2, if the long-term use of water containing high coke and blast furnace gas purification system and dry, it will affect the normal operation of the purification system (filtration pressure increased, serious and even lead to normal filtration, also lead to dust can not be normal unloading etc.); more serious for the blast furnace with net gas said not even a normal discharge (top pressure tank or a pressure higher than indoor clock dozens of kPa

Q:What is the difference between coking coal and coke

Therefore, coke is not coking coal, coking coal is one of the products after processing

Q:What are the indicators of first grade coke and the two grade coke?

No greater than 12 is not greater than 0.6 not less than 80 not greater than 8 not greater than 1.9

Q:In the coke analysis index, M40% and M25% respectively mean what?

(2) mainly used in: Coal Science and Technology (first level), coal processing and utilization (level two), coal chemistry and coal quality analysis (level three)

Q:Coke can be used to do what carbon black can be used to do?

2 carbon black is produced by compounds of carbon and carbon, the main hydrocarbon combustion, the combustion is not sufficient, can not be converted into carbon dioxide, is carbon monoxide, so as small particles of carbon particles, which is carbon black; carbon black can be used as filling agent of rubber mixture, preferably for tires.

Q:What is the use of petroleum coke

Petroleum coke. Solid residues produced by high temperature coking of residual oil, residual oil or bitumen from petroleum refining

Q:Braised meat burning coke, iron black layer, I do not know how to clean, please help answer

Tomatoes to the bottom of the potNot a few good tomatoes in the pot boil, it will naturally fall.4, beer and liquor to the bottom of the potIf cooking is careful not to paste pot, the pot dish, if not easy to brush off, can pour a little wine and beer and a small amount of water (1:1:0.5 ratio) mixed cover, placed 5 minutes after it is easy to scrub clean.

Q:What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you

Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke. Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.

Q:How many degrees of coke ignition temperature can ignite coke

Ignition temperature (450-650) in air;Dry ash free base low calorific value is 30-32KJ/g;The specific surface area is 0.6-0.8m2/g

Q:Coke is how to make it? What is the use?

Coke production has prepared the material into the coal charging car from coal tower, were sent to the furnace chamber. The gas produced by the dry distillation is sent to the chemical product recovery workshop for processing. After a coking period (from charging to pushing the required time is generally 14 to 18 hours, depending on the carbonization chamber and the width), a pusher will mature by refining coke coke machine into the coke car; coke quenching, coke is discharged into the cold coke; then screening and storage (Figure 4).The coking plant is generally composed of two coke ovens. The two coke ovens are arranged on the same central line, and a coal tower is arranged in the middle. A furnace with coke oven machinery -- corresponding charging car and coke machine, machine coke, coke quenching car and motor vehicle; also equipped with a set of facilities including coke quenching, coke quenching tower, coke quenching pump, coke powder and coke powder sedimentation tank grab, arranged in the end furnace group. The center of the coke quenching tower is not less than 40 meters from the center of the carbonization chamber. If dry coke quenching, coke oven station. The coking plant is also equipped with the necessary piping and reversing system.