T-Head Bolts And Nuts With Low Price
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 Sets set
- Supply Capability:
- 10000 Sets Per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of T-Head Bolts And Nuts With Low Price
Available Material
1. Stainless Steel: SS201, SS303, SS304, SS316, SS410, SS420
2. Steel: C45(K1045), C46(K1046), C20,etc.
3. Brass: C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40),etc.
4. Bronze: C51000, C52100, C54400, etc.
5. Iron: 1213, 12L14, 1215, etc.
6. Aluminum: Al6061, Al6063, etc.
7. Carbon steel: C1006,C1010,C1018,C1022,C1035K,C1045,12L14,etc.
8. Alloy steel: SCM435,10B21, C10B33,etc.
Surface Finishing
1. Zn-Plated, Ni-plated, Tin-plated, Passivated, Sandblast and Anodize;
2. Chromate, Polish, Electro Painting, Black Anodize, Plain, Chrome plated;
3. Hot Deep Galvanize(H.D.G.) etc.
Heat Treatment
Tempering, Hardening, Spheroidizing, Stress Relieving.
Applications of T-Head Bolts And Nuts With Low Price
On the other hand, the enlarged shape on one end of a bolt. The type of bolt head determines the type of tool used to tighten it.
Packing & Delivery of T-Head Bolts And Nuts With Low Price
1.bulk+carton+pallet
2.small box+carton+pallet
3.color box+carton+pallte
4.As you require
Our Quality Control of T-Head Bolts And Nuts With Low Price
Our Quality Management System based on the International Standard Specification ISO-9001-2000. The system ensures that our products adequately comply with the standards and specifications required by the customers. Our QA/ QC activities guarantee that the materials supplied by us comply with the required standard specifications. They also ensure that all the employees affecting and well-equipped to perform their assigned tasks with proficiency and perfection.
The inspection activity starts right from the receipt of Raw Material and continues throughout the manufacturing and galvanizing process until final shipment. Trained and highly qualified QC staff conducts inspections at every stage.
To keep check on quality of products, Our Bolts has Quality Assurance Cell. This Cell keeps a close watch, right from the procurement of raw material till the distribution. To further strengthen the control on equipments, strenuous efforts are being made from quality control at every stage of manufacturing. This system ensures strict adherence to specification from the strict adherence to specification from the raw material stage, wherein we check chemical as well physical properties of it. All raw material stages, where in we check as well as physical properties of it. All raw materials accepted and passed are free from cracks and surface discontinuities.
The Process:
All our fasteners are checked with Ring & Plug Gauges, Micrometer and Venire Calipers & Slip Gauges are periodically checked and calibrated & get them checked by approved agencies as well.
Testing:
In-house testing laboratory is well-equipped to do tests like Hardness, Proof Load, Wedge Load, Tensile Strength, Head Soundness, Elongation and Yield Strength etc. All the gauges, micrometers and venire calipers are periodically got calibrated and examined by government approved agencies. Test Reports are provided with each dispatch for customer's satisfaction.
Our Adavantages About In-house Production Line of T-Head Bolts And Nuts With Low Price
Cold Forging: Equipped with multi-station forming machines for high production at close tolerances, from the diameters of bolts 4mm to 27mm and length from 8mm to 400mm.
Hot Forging: Further facilitate us to produce even bigger diameters up to 64mm from 10mm and lengths 25mm to 3000mm (even special head bolts).
Rolled Threads: Rolled thread is the ultimate solution to get more strength and fatigue up to 20%, due to uniform grain flow and unbroken fiber lines.
- Q:Are the fire hydrants where you live red, yellow, white, or another colour?
- Suggest 2 stands with something like a broom handle in between
- Q:Okay, I am running Microsoft Windows 2000 Professional NT..every two weeks, it asks me to change the password to get into my computer. Yesterday, I changed it. It has ALWAYS asked me to verify the password, yesterday it did not. Now the password I thought I typed in will not allow me access to enter the machine. I have tried all the suggestions I received to my previous question (thank you all), and now I am stuck on the User name/ old/ new/ confirm screen.when I type any passwords, it tells me that the old password is not correct. The machine belonged to someone before me, and I have never had this problem before. I do not know how to contact the previous owner.so, can I fix this problem, or has my PC become a very expensive paperweight?
- The Fireman's Union has said that small fires turn into big ones very quickly. I can't wait (unless it's my house that is) to see fire engines trundling along at 30 mph in built up areas, with no sirens etc. This is the classic example of the law of unintended consequences as imposed by idiots. I have never heard of a fire engine causing an accident, have you?
- Q:I need to talk about it in my physics class
- Are you familiar with any type of soldering? There is low temp, and high temp, depending on the application, and the type of solder that you use. The most important thing to remember, is to thoroughly clean the inside of the fittings, and the end of the pipe. If you cut a pipe, make sure that you ream the inside, to restore the inner diameter of the pipe to its full bore dimension, otherwise, water will eat the pipes, from the inside, and you will have a premature breakdown in your piping system. A non acid, water soluble flux is required, again, so your pipes won't deteriorate from the inside. Low temp soldering can use a propane torch, but high temp, requires a hotter flame, to melt the solder. Practice on some pipes, before soldering for real. Never leave your flame in one spot too long. Doing so will cause the flux to be burned at that spot, and no solder will take at that spot, thus, ensuring a leak. Move your flame around the whole joint, heating it up uniformly, and concentrate your flame towards the center of the fitting, as solder will travel towards the heat. Good luck!
- Q:i was standing by my friends, and tripped, pulling the firealarm down. it went off, and veryone evacuated the school.I was in gym, and walked to the neasest teacher and told him i did it. he took me to the vice principals office and told me to sit down, and then he asked me if id leave if he elft and i said no . now im next to tears, i have a near spotless record. The teacher vouched for me that it was an accident Everyone in there said it was an accdient but can i still get in trouble?
- This Site Might Help You. RE: Where do I find a hinge for pipes? I'm looking for a way to join two pieces of PVC or metal pipe, and allow them to fold up. I have looked everywhere for something or the kind, and I know I've seen them used on folding hockey nets and stuff. Any suggestions?
- Q:I've never tested my fire alarm (yes I know i'm stupid) but i'm going to get in the habit of testing it each week. My fire alarm was making a strange chirping noise every so often so I changed the battery and its still chirping. There is a yellow light which is on constantly and a red light which flickers off and on. I want to see if it works so I pushed the button and nothing happened. I assumed that's how you tested it?
- which ever has the italicas is the correct answer! simple! and you can figure that out, check for italiacs!
- Q:we just had a chimney fire and our landlords told us not to call the fire department. we have no smoke detectors in our house. what would have happened if this happened in the middle of the night and we couldnt escape? so now our landlords are beyond pissed at us. yet they are the wrost landlords ever. we have NO heat. it gets to 20 degrees out and we have a 4 month old son. does anyone know what we can do about this?
- sophisticated stuff. search at bing and yahoo. just that may help!
- Q:When I put a DVD, CD or anything into the drive, it sounds like it spins for a moment and then stops. On the My Computer it wont even register that I put something in it. My MediaSmart also says there is no disc when in fact there is one. The button to open the drive works perfectly. What could have happened in the past few days to cause this?
- surprising to know that you are not able get from any of the stores you mentioned.try from a big town nearby.
- Q:Have you ever had a day where you view everyone else as dogs and you are the fire hydrant?
- Head Loss (pressure loss due to elevation change) is going to be a bit of 6 psi. (0.433 psi per foot). That's a lot to expect to overcome. Unless you have a really fast moving river (you will be converting velocity pressure to overcome the head loss and the friction in the pipe, fittings, filter, etc.), this sounds like a no-go project. I could be wrong, it's just a gut feeling.
- Q:As shown in Figure six, the angle of the edge distance 71mm, diagonal 80mm, about 34mm high; and its connection of the pipe joint exposed a small section, measured its outer diameter is 57mm; through these parameters can see the pipe joint screw size is how much? Or see the specifications of the hose.To take something in this, it is not convenient to disassemble temporarily, that can check through standard size, I do not know the check which standard, hose and pipe joint standards are many, I do not call up this kind... Please explain to the master, this call what, check what standard, how to check, through the above parameters can get out what size, etc., thank you very much!! PS: the key is size. Now you're going to do the connection
- The maximum thread size is M60, but the maximum size is only 50.Press joint standards; hydraulic pipe fittings - screw thread. A standard two; classification; 1. screw internal and external threads two; 2.; according to the tooth shape can be divided into: 1) 2) 3 triangular thread trapezoidal thread; according to the 3. line number single thread and multi thread;; 4. by rotation in the direction of the left and right screw screw two, right standard; 5. by use of different points are: with the common thread, metric thread sealing pipe; two. 1. common metric screw threads; metric screw thread with a capital M, tooth type angle 2 DEG =60; 2. metric screw thread according to pitch
- Q:i am repairing a busted line with a compression fitting. I am missing the sleeve of the compression fitting that goes into the pipe.what can i do other than buy another one to repair this line without the sleeve? I already have the fitting on the other part of the line so I don't want to change anything, just fix what's there
- Somebody comes by and paints them. Papaw
1. Manufacturer Overview |
|
|---|---|
| Location | Liaoning, China |
| Year Established | 1998 |
| Annual Output Value | Above US$ 13 Million |
| Main Markets | Mid East, Africa, Europe |
| Company Certifications | ISO 9001:2008; ISO2531:1998 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Dalian, Tianjin |
| Export Percentage | 52% |
| No.of Employees in Trade Department | 500 People |
| Language Spoken: | English; Chinese; Spain; Alabic |
| b)Factory Information | |
| Factory Size: | Above 6500 square meters |
| No. of Production Lines | 3 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Average |
Send your message to us
T-Head Bolts And Nuts With Low Price
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 Sets set
- Supply Capability:
- 10000 Sets Per Month set/month
Offcanvas right
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
