Solar Panels San Francisco Ca - Polycrystalline Silicon Solar Panel 265w
- Ref Price:
-
- Loading Port:
- Nanjing
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200000 watt
- Supply Capability:
- 20000000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Solar cell module production process
Line called packaging line components, packaging is the production of solar cells a key step in the packaging process without a good, multi-well battery is also not a good component of production boards. Battery package not only the battery life is guaranteed, but also to enhance the combat strength of the battery. Product quality and high service life is to win can be the key to customer satisfaction, so the quality of components of the package board is very important.
Introduction
This installation Manual contains essential information for the electrical and mechanical installation that your must know before installing CUSTOMER PV modules. This also contains safety information you need to be familiar with .All the information described in this manual are the intellectual property of CNBM and based on the technologies and experiences that have been acquired and accumulated in the long history of CUSTOMER. This document does not constitute a warranty, expressed or implied.
CUSTOMER does not assume responsibility and expressly disclaims liability for loss, damage, or expense arising out of in anyway connected with installation, operation, use or maintenance of the PV modules. No responsibility is assumed by CUSTOMER for any infringement of patents or other rights of third parties that may result from use of PV module.
CUSTOMER reserves the right to make changes to the product, specifications or installation manual without prior notice.
Work Principle
Data sheet
Maximum power | 265W |
Cell type(mm) | Polycrystalline solar cell 156*156 |
Number of cell(pcs) | 60(6*10) |
Manufacture site | China |
Open-circuit voltage(voc) | 37.7V |
Maximum power voltage(vmp) | 30.6V |
Short-circuit current(isc) | 9.03A |
Optimum operating current(imp) | 8.66A |
Power tolerance | 0~+5W |
Module efficiency | 16.3% |
Dimensions(mm) | 1640*992*40 |
Weight | 19 kg |
Backsheet | Silver |
Frame Colar | White |
Frame | Anodized Aluminum Alloy |
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A: All products offered byOKorder.com are carefully selected from China's most reliable manufacturing enterprises. Through its ISO certifications, OKorder.com adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: What is a solar PV module?
A: A solar PV module consists of many solar cells that are connected together (typically in series) and packaged in a frame (typically made of aluminum).
Q3: What are the advantages and disadvantages of monocrystalline solar PV modules?
A: Monocrystalline solar PV modules are the most efficient type of solar PV modules, with the exception of CdTe thin film solar PV modules. As a result, monocrystalline solar PV modules are more expensive when compared to almost all other types of solar PV modules.
Q4: What is the typical service life of a solar PV module?
A: The typical life of a PV module is 25 years. However, superior quality PV modules boast service lives up to 35-40 years (electrical generating capacity is often reduced, however by that point).
- Q: I need to be able to charge a 2v 7amp battery with a solar panel. I understand that the charge controller will keep the battery from over charging/discharging, but what I don't understand is the amps.The solar panel is rated at 5watts.The solar panel comes with a 2v 3amp charge controller but will I need to buy a 7amp charge controller and replace it with that for my battery pack? Please explain. Thanks in advance.
- The battery is probably 2v 7amp-hour, not 7 amp. 7amp-hour is basically just how big the battery is. You can charge that battery with as little current as you want, it'll just take longer. The 7 amp-hour tells you that it'll take a long time to charge. 7 amp-hour means it can discharge 7 amps for hour. If you were charging it at 7 amps, it would take hours to charge, but I don't recommend that. You could charge it at .5 amps for 4 hours or .25 amps for 28 hours. The smaller the current, the longer it will take, but it will get there eventually assuming your voltage is high enough (which it should be with the charge controller).
- Q: Can solar panels be used in combination with wind turbines?
- Yes, solar panels can be used in combination with wind turbines. This combination of renewable energy sources allows for a more reliable and consistent power generation, as wind and sunlight are complementary in nature. By integrating solar panels and wind turbines, the system can generate electricity during both day and night, as well as in varying weather conditions, maximizing energy output and increasing overall efficiency.
- Q: I have seen DIY software which explains everything for novices. Specifically, how to build your own solar panels and tie them into your home electrical system for about $00 in parts.Has anyone tried doing this? Was it easy?
- Hi Mitch, Yes they are legitimate ans so much so the government will actually help you pay for them. Someone has already mentioned if you purchase them from your local solar panel installer they will not be cheap.They have come down in price a lot over the last couple of years. Yes you can build your own and no its not too difficult.You need to know in your own mind whether you just want to reduce your utility bill or come off the grid completly. The best solution is a combination of wind and solar power and yes you can build your own windmill as well and at the bottom her I will show you where to go to get easy non technical plans. Naturally the sun does not shine at night so your solar panels would not work then but windmills function 24/7 as long as there is wind. If you have nearby neigbours please be aware windmills do make some noise which might upset your neighbours and of course see if you need planning permission from the town. The solar panel plans show you how to set an 80w solar panel which of course would not be able to power your whole house,but once you have built one why not build loads more and each one will get easier to build. Wish you all the best.
- Q: How do solar panels affect the resale value of a property?
- Solar panels can have a positive impact on the resale value of a property. Studies have shown that homes with solar panels tend to sell faster and at higher prices compared to homes without them. This is mainly because solar panels can lower energy costs for homeowners, increase energy efficiency, and contribute to a more sustainable lifestyle, all of which are highly valued by potential buyers.
- Q: How do solar panels impact the electric bill?
- Solar panels can significantly reduce or even eliminate the electric bill. By generating electricity from sunlight, solar panels can offset the amount of power needed from the grid. This means that homeowners or businesses with solar panels can consume less electricity from the utility company, resulting in lower energy bills. In some cases, excess solar energy can be exported back to the grid, earning credits that further reduce the electric bill.
- Q: if so, would it be possible to make (or remake) an organism that could subsist off of sunlight and external heat like plants?
- There are, in fact, protozoa that use chlorophyll to harvest sunlight, but the thing is, they also MOVE. So it's not entirely unreasonable that an animal cell could do the same.
- Q: I need a new roof soon and I was wondering what the difference in cost would be from a standard shingle roof to a roof including solar panels. Does anyone know the cost difference?
- The solar panels are very expensive to provide much power. If u go that way do not skimp on the support as a high wind will blow them away. In Ecuador I put in a remote site for communications. It was working good when a Strong wind blew $0.000 worth of solar panels all over the jungle.
- Q: How do I choose the right size of solar panels for my home?
- To choose the right size of solar panels for your home, you should consider factors such as your average electricity consumption, available roof space, and budget. Start by calculating your average monthly electricity usage, and then determine how much of that you want to offset with solar power. Consider the size and orientation of your roof to evaluate the available space for panels. Additionally, assess your budget and the financial feasibility of the installation. Consulting with a solar professional or installer can provide valuable guidance tailored to your specific needs and help you make an informed decision.
- Q: How do solar panels affect roof ventilation?
- Solar panels can potentially affect roof ventilation by creating shade and reducing airflow, which can result in higher temperatures and reduced effectiveness of the ventilation system. However, this impact can be minimized by using solar panel mounting systems that allow for proper airflow and by ensuring adequate spacing between the panels and the roof surface.
- Q: It measured volts before I attached it, and after attaching the voltage regulator device, the voltage dropped down to 3 volts, even when just measuring the difference in the solar panels nodes themselves, suggesting that the entire panels voltage dropped and not just the voltage in the regulator. I tried testing it with a power supply of 7 V 0. A and it works fine, but I don't know why it won't work for the solar panel.
- you cannot treat the open circuit voltage of a solar panel like a voltage source (like a battery.) the load response of the panel doesn't behave that way. small panels and panels that are producing less than about .5A are very happy to have their output voltage pulled down to whatever they're connected to (typically zero.) I observed the same phenomenon when i connected a 2V 725mA panel to a 2V 325mA fan -- the open circuit voltage of 5V dropped to 3V when connected to the fan, and returned to 5V when disconnected. The easiest workaround is to use 2V of rechargable batteries in parallel with the panel so that the battery holds the 2V potential difference and the panel just supplies the current. any excess current charges the batteries, so you might consider whether or not you need some type of charge controller to prevent burning the batteries via overcharging. there are actually very few applications of solar panels connected directly to circuits that i have seen that have any kind of robust performance -- if they work at all, they eventually die/burn themselves out in a couple of months. the best robust designs always have a rechargable battery and charge controller somewhere in the power circuitry to buffer the load circuit from the panel. .
Send your message to us
Solar Panels San Francisco Ca - Polycrystalline Silicon Solar Panel 265w
- Ref Price:
-
- Loading Port:
- Nanjing
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200000 watt
- Supply Capability:
- 20000000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
