Poly Solar Panels 200W with CNBM Fortune 500

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT or LC
Min Order Qty:
1 PCS
Supply Capability:
100000 PCS/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Description:

CNBM Solar  is a world-leading and Vertical integrated manufacturer ofhigh-performance with Silicon,

Wafer, Cells, Modules, which convertsunlight into electricity for residential, commercial, and utility-scale

power generation.

        

The capacity of CNBMSolar is reach to 1GW, andmake sure each year our shipment capacity is more

Than 700-800MWs, at the same time, wehave set up the largest solar power station with our partner

in Ukraine.

       

CNBM is a Quality + Service orientedcompany with“Excellence at Each Step” approach, composed of

the finest components from TUV andIEC-certified partners around the world, CNBM modules consistently

undergo a variety of trials at thecompany’s Test & Development Centre, ensuring peak performance

capabilities. The company iscommitted to develop and provide the world with clean and renewable energy

to ease the energy shortages as wellas human kind’s impact on the environment.


Characteristics of  Ploy solar panels CNBM 200W

I.Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II.Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III.EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.

IV.AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.

V.Junction box: Multi function junction box with water proof.

VI.Long lifetime: ≥25 years; Less power decrease.

VII.Good performance of preventing from atrocious weather such as wind and hails.

VIII.Resisting moisture and etching effectively, not effected by geology.

IX.The certificate issued by international authority: UL, TUV, IEC, VDE, CE.

 

Standard Test Conditions of  Ploy solar panels CNBM 200W

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

 

Advantages of  Ploy solar panels CNBM 200W

• CNBM Solar performance guarantees for 25 years

• 12 years guarantee for workmanship

• Timeliness of delivery

• Quality Products certified (TÜV, UL, CE, VDE, ISO)

CNBM International Corporation's products including Monocrystalline Solar Panel, Polycrystalline Solar Panel have received and enjoyed famous reputation in many countries and regions in the world .As a solar panel manufacturer in China, we strive to provide our customers with excellent service, superior products and unmatched value.

Temperature Coefficient of  Poly solar panels CNBM 200W

NOCT 

47℃±2℃

Temperature Coeffucients of Isc (%/℃)

 0.064

Temperature Coeffucients of Voc (%/℃)

-0.33

Temperature Coeffucients of Voc (%/℃)

-0.45

 

 

Mechanical Data of Poly solar panels CNBM 200W

Dimension 

1330  ×  992  ×  35 mm

Weight

16.2  kg

No. of Cells and Connections

54  (6 × 9 )

Tolerance

0 ~ + 5 W

Cell

Polycrystalline Cell 156 × 156 mm

Packing

720 Pcs / 40ft(H) Container

 

Limits of  Poly solar panels CNBM 200W

Operating Temperature

-40℃ to +85℃

Storage Temperature

-40℃ to +85℃

Max System Voltage 

1000VDC

 

Guarantees of  Poly solar panels CNBM 200W

Products Guarantee

12 yrs free from defects in materials and workmanship

Performance Guarantee

No less than 90% within 10yrs and no less than 80% within 25yrs

Certificates 

TUV(IEC61215&IEC61730),CE

 

 

The IV Curve of Poly solar panels CNBM

 

 

Poly solar panels CNBM 200W

Picture 1. The workers of Ploy solar panels CNBM 200W

Poly solar panels CNBM 200W

Picture 2. Production of Ploy solar panels CNBM 200W

Poly solar panels CNBM 200W

Picture 3. Packages of  Ploy solar panels CNBM 200W

Poly solar panels CNBM 200W

View Manufacturer's Shop

1. Manufacturer Overview

LocationJiangsu, China
Year Established2004
Annual Output ValueBelow US$1 Million
Main Markets Australia;Asia;South East Asia; South America;North America; Europe;Africa
Company CertificationsISO 9001:2008; CE; TUV; UL

2. Manufacturer Certificates

a) Certification NameCE Cirtificate
RangeThe CE marking is the manufacturer's declaration that the product meets the requirements of the applicable EC directives
ReferenceIssued by European Quality certificate org.
Validity Period From Jul.8,2008
b) Certification NameTUV Cirtificate
RangeSafty certificate for components
ReferenceIssued by TUV SUD
Validity Period From Nov.4,2009

3. Manufacturer Capability

a)Trade Capacity
Nearest PortShanghai
Export Percentage1% - 10%
No.of Employees in Trade Department 200-300 People
Language Spoken:English;Chinese
b)Factory Information
Factory Size: Above 8,000 Square meter
No. of Production Lines 6
Contract Manufacturing OEM Service Offered;Design Service Offered
Product Price Range Average

FAQ: What is your warranty system?

  For c-Si panel: 25years output warranty for no less than 80% of performance, 10years output warranty for    no less than 90% of performance. Free from material and workmanship defects within 5years.For a-Si panel: 20years output warranty for no less than 80% of performance, 10years output warranty for no less than 90% of performance. Free from material and workmanship defects within 2years.




Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Can a solar panel work with an inverter?
There could be a couple of reasons why it isn't working. First, 2V panels actually put out a considerably higher voltage because it is presumed that they will be used to charge a 2Vdc battery. That requires applying a voltage greater than 2Vdc, and usually there is a solar controller that regulates the solar power to the battery. It also has a voltage drop. Look at the first reference reference, and you will see these values for a particular panel: Voc: 2.6V (open circuit voltage) Vmp: 7.2V (voltage at maximum power point) Voc is the voltage the panel produces under standard sunlight and temperature conditions (25°C), with no load applied. As load is applied, the voltage drops (see reference 2). Power is the product of current times voltage, so at one set of conditions (namely at Vmp) maximum power is available from the panel. Your inverter might not be working for either of two reasons: ) it has input protection circuitry that locks out operation when it senses an overvoltage, as in the 2.6V open circuit voltage, or 2) the panel does not produce enough current and the voltage from the panel collapses under excessive load. For example, if you load your inverter to 20W, then nominally the 2VDC input to the inverter must supply 20W/2V/eff = 0A/eff Assuming the inverter has an efficiency of 80%, the input current required is: 0A/.8 = 2.5A A solar panel operating at maximum power would need a rating of about: 2.5A x 7.2V = 25W Is your panel that big? The other option, as mentioned by others, is to charge a battery that runs the inverter. Other nuances: Voc increases as temperature decreases. Sunlight intensity varies (obviously), so the panel may produce less than rated power. The power specifications often are printed on the back side of the panel.
Q:Solar Panel and Wind Power?
I live in the Southwest where the sun shines almost every day. I got a quote for Solar system to produce about enough to cover my annual usage. My annual average electrical usage costs about $2300, or about $90/MO. The system costs around $30,000 but I can get rebates and some of your tax dollars in subsidies to bring my cost down to under $20,000. I can borrow $20,000 for 3 years at 7% and pay $95/MO, so in 3 years I will have the system paid for. As you can see, I don't start Saving any money for a long time. Maybe the rates will go up in later years which will help, but My friends that have solar systems tell me things like controllers go bad over time and they cost like $3000. Will it ever pay for itself? Maybe. Please note. This still does not get me off the grid. This system will not support things like an electric stove, air conditioning, Pool pump running, etc. so I still need the grid for when these operate and my usage peaks. If I installed a system that would totally support everything 24/7 the cost would be astronomical. If you live in the east, midwest, or NW where you have cloudy days, your economic calculations will be much less favorable I would think, unless your power costs are much higher than mine..
Q:Solar Panel Question...?
Nice enough idea you have there, but practical reality is waiting to bring you back to your senses. The appliances you want to operate take a lot of power. You would need an awful lot of solar cells or a very cumbersome windmill to provide sufficient energy for them. You will find that for a mobile kitchen, an ordinary generator running on gasoline or diesel will be much less expensive to buy and maintain, less trouble to haul around, and much easier to replace if necessary. Considering that propane will probably prove less expensive yet, go with that for as many appliances as possible.
Q:Which is the least expensive, yet still very efficient, type of solar panel?
Since you are asking for a rather technical answer you should be aware that solar panels come in several varieties. Two broad categories are photovoltaic panels which have achieved marketable efficiencies of around 24% and solar thermal panels which are routinely achieving efficiencies of between 60 to 80% while they are also much cheaper than photovoltaic panels. So the short answer is solar thermal panels. But what can you do with solar thermal energy. The answer is just about everything you can do with light energy. Sometimes additional equipment makes the efficiency drop to near that of photovoltaic panels. The trick is to keep the devices as simple and as efficient as possible. Solar thermal can of course be used to heat our homes. But it can also be used directly for air conditioning. The type of air conditioner uses a slightly different principal but it is one of the oldest that was once used in ice houses before refrigerators. It is known as an absorption system. At some point you may want to make electricity from the sun's heat. The most efficient commercial systems are not photovoltaic but solar thermal. There are several commercial systems where increased scale improves efficiency. The most efficient is a solar parabolic dish system combined with a stirling engine. At around 30% efficiency it beats photovoltaic and other thermal systems. At this level of commercial development, the various systems are more often described as solar collectors rather than panels.
Q:Solar panel cable setup?
How long is the run? 2 gauge is a good choice for runs up to 25 feet at 20 watts, if you are much further in your run, move to 0 gauge to reduce resistance of the wire itself in the circuit. Otherwise refer to the prevailing electrical code of your local unit government. This is a must if you plan to maintain insurance. At lower voltage, a little resistance means a lot. 4 gauge might be okay for 20 VAC, but the voltage drop on a low voltage system from resistance of the wire itself is measurable at 20 feet. It is the difference between a light fixture working or not. If you are planning on adding additional panels in the future, you can get terminal buss with screw hold downs at various vendors like Mouser or Digi key. Each panel can be on it's own screw, while the buss is common on the other side of the connection. one for the positive and one for the negative.
Q:Solar Panels Energy Theory?? ENERGY?
No. That lie is put out there by people who would lose out if solar panels ever became widely used. It does take about as much power to produce them as the panels make in 2 years in a good location, but considering their useful lifetime is at least 20-30 years, that isn't much. Wind power produces as much power as is used to create the windmill in 7-9 months in a decent location. Neither will ever produce as much power as they required to be made if placed in the wrong location, like in the shade or a non- windy area. No coal plant would ever make as much energy as it took to build it if no coal were provided either.
Q:Making a Charger out of small solar panels?
The first item is whether the psp charger output is ac or dc. IF, AC then you are stuck as the panels put out DC. (Increasing the voltage enough to cover invertor losses is not practical in this instance!) IF DC, then you need to combine panels to produce 2 Amps, after which it is run through the 3 terminal VOLTAGE regulator to limit the voltage to 5v. That is 8 panels in parallel in 2 groups placed in series = 2amps at 8 volts, then add regulator for 2 amps at 5v. (Parallel increases amps, series increases volts.) Total panels required is 6 panels.
Q:Why aren't electronics made with solar panels?
Yes your right, solar panels (photovoltics) could be used to make electricity for small electronics. Right now solar cells are on many calculators, and even flashlight. But the problem is the lenght of time the cells take to charge the device, verses the power demand. I don;t think the size of the panels, and the amount of time needed to charge the device are practical. One think I have been thinking is that every one should have a photovoltaic panel to charge a battery. Then, use the battery to charge cell phones, MP3 palyers. The panel and the battery could be about the 8 x inches, and could sit in window, or on a dash board to get charged, then used in doors over night to charge devices.
Q:Solar Panel Watts?? help!?
Watts is a measurement of power which is a combination of Voltage x Amps Example: a 200 Watt panel can produce 6.6 amps at 2 Volts. (200 = 2 x 6.6) If you bought a 24 volt system the same 200 Watts would give you half the amount of amps since the power (watts) is the same. When determining your needs for a solar system there are many factors that have to be taken into account. The amount of power you use will depend on what appliances you have in the house, how much you use them, and how careful you are with vampire loads (A TV or stereo will use some power even when turned off unless you unplug them). The amount of panels you need will also depend on your battery system, amount of sunlight that you have in a day and how many days of reserve power you think you will need based on the weather in your area. If you wanted to completely run your house on solar energy you are looking at an investment of $5,000 - $20,000 or even more. There sometimes are tax incentive depending on where you live that will reduce your overall cost. Some examples of power usage: Toaster : 800-500W Microwave : 600-500W Dishwasher : 200-500W Washing Machine : 500W Vacuum Cleaner : 200-700W Iron : 000W Clothes dryer : 4000W Ceiling Fan : 0-50W Table Fan : 0-25W Electric Blanket : 200W Hair Blow dryer : 000W Electric Shaver : 5W Laptop Computer : 20-50W Desktop Computer : 80-50W TV (9 colour) : 70W Clock radio : W Fridge / Freezer : 500W 25 colour TV : 50W Electric Kettle : 2000W
Q:Is it truE thet solar panels. . ?
They can supply a current on their own, but that is not very useful. A battery allows you to store that current so that you can use it at night or when clouds are blocking the sun. the voltage regulator makes sure they do not provide more power than the battery or whatever else you hook it up to can handle. Most places that sell solar panels will have these items to go with them. You will probably want a battery with a larger capacity than a car battery.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range