Plastic Tubes - China PP-R Pipe and Fittings for Industrial Applications
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Overview
1)Cold/hot water supply facilities for public buildings
2)Food, chemical,electronic industry pipeline networks;Such as Pipeline networks for transporting all kinds of corrosive liquids
3)Drinking water production system pipeline networks;Such as Pure water and mineral water
4)Air conditioning facility pipelines
5)Compressed gas pipeline networks for industry
6)Pipeline networks for swimming pools
7)Pipeline networks for solar energy facilities
8)Agriculture and garden production transporting systems
PPR Pipes Advantages:
1.Sanitization & Non-poison: This product is green building material which is able to use for pure clean drinking water pipe system. No heavy metal additives would not be covered with dirt or contaminated by bacterium.
2.High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
3.Corrosion-Proof & Non-Fouling: Resist chemical matters or electron chemical corrosion. Able to avoid the pipe's fouling or blocking as well as the blemish, rust on basin and bath.
4.Heat Preservation & Energy-Saving: Excellent heat insulation features, minimal thermal conductivity which is only 0.5% of the conductivity of metal pipes.
5.Less Weight & High Strength: Its proportion is only 1/8th of metal pipe’s, with pressure-proof strength up to over 5MPa(50kg/sqcm),high tenacity and impact resistance.
6.Beautiful Appearance & Higher Flow Capacity: Smooth inner and outer surfaces, less flowing resistance, soft color and beautiful figure.
7.PP-R is recyclable and environmental friendly.
Why Us？
1.We can make any requirements in design,pattern,color and size.
2.We can make customer's logo on the surface of products.
3.The dimension tolerance of our products is controlled within 0.03mm.
4.Our products are child safety,pet safety and environment-friendly.
5.Our products are exported to America,Europe,India,west Asia, etc.,and conforms to the standard test.
Product Description
Pressure | Size(mm) | Pressure | Size(mm) |
PN1.25MPA | 20*2.0 |
PN1.6MPA | 20*2.3 |
25*2.3 | 25*2.8 | ||
32*2.9 | 32*3.6 | ||
40*3.7 | 40*4.5 | ||
50*4.6 | 50*5.6 | ||
63*5.8 | 63*7.1 | ||
75*6.8 | 75*8.4 | ||
90*8.2 | 90*10.1 | ||
110*10.0 | 110*12.3 |
Product Show
Our Services
Pre-Sales Service
1.Inquiry and consulting support.
2.Sample testing support.
After-Sales Service
1.Training how to instal the machine, training how to use the machine.
2.Engineers available to service machinery overseas.
- Q: i have a plastic tube that i want as a handrail how do i do it, cos tube is 1 inch wide
- There okorder /
- Q: Is it difficult to sell plastic pipes now?
- The clerk shouted at the top as an individual, may not be effective, you can only tell you the appeal of a person or several people, in order to allow others to accept your ideas, needs to have professional knowledge, familiar with the business, full of sincerity and positive working attitude, have certain pricing, but also want to know when will the wind blows. To continue, when to exit.
- Q: Can plastic tubes be used for fluid transfer?
- Yes, plastic tubes can be used for fluid transfer.
- Q: I remember we use to have tubes that bent up well but were very soft a tin like material that eventually they found because it had lead in them it leached into the toothpaste such that now we have plastic toothpaste tubes predominatly made in the US.
- That sounds about right. I do remember those tubes that rolled up easily and were made of a bendable metal. In those days, I was pretty bad about brushing my teeth so it's probable that I wasn't affected that much by whatever lead content there was. I did get a lot of cavities, though.
- Q: do anyone remember the plastic tube roll that you put on your b&w tv to mimic a color set?
- YUP. I think it was the mid 50's.
- Q: I added a bit too much Oil into the engine, so I decide that I would be able to suck the oil out with some tubing. However part of the plastic tubing fell off into the dipstick hole and it possibly in the oil pan now. I call some mechanic, and ended up having some say that it will damage the engine and some saying that it will not effect the engine. Can someone give me a more in-depth explanation. On how I can remove the plastic tubing? and How is will effect the engine? Should I even drive it?
- Since it it plastic and your engine gets extremely hot it will probably just melt. I will bet when you get around to it. The plastic will have already been melted. Even though its 5 inches it will just swirl around in there until it melts or untill you get it out. I dought you will be able to get it out by using a wire put its worth a try. One little piece of plastic tubing will not stop forged rods and a crankshaft from moving nor will it stop up an oil pump that has a filter on it to remove such things from entering your oil ways. And to pay somone to do that will be about 150$. About 2-2 and a half hours labor to remove and install the oil pan. Save your money itll be alright.
- Q: Buried PVC wire tubing (heavy) is a rigid flame retardant tube or a semi rigid flame retardant tube?
- Semi hard plastic tube, Department of PVC resin and plasticizer, stabilizer and other auxiliary agent, by extrusion molding, suitable for electrical and fluid conveying pipe casing, can be used to protect the wire and cable etc. under normal temperature. The tube is provided with the length of not less than 10 meters. The colors are white, yellow, red, blue, black and ecru. The pipe connections are generally made of plastic sleeves, glued and bent freely, without heating
- Q: Are plastic tubes resistant to abrasion or scratching?
- Plastic tubes can vary in their resistance to abrasion and scratching depending on the type of plastic used. Some plastic tubes, such as those made from high-density polyethylene (HDPE) or polypropylene (PP), tend to have good resistance to abrasion and scratching. However, other types of plastics may be more susceptible to these forms of damage. It is essential to consider the specific characteristics and properties of the plastic material used in the tube to determine its resistance to abrasion and scratching.
- Q: I went to buy a plastic water bottle that has a tube inside that you frezee, and keeps the water cold they don't have anymore they sold like hot bread. I been looking everywher, and only found a place Alibaba that sells them wholesale only. A Hello kitty in OKorder which is not the one I want . If anybody knows wher I can buy i will appreciate a link or name of the place.
- You can keep water cold without having to use the frozen tube. Just buy a double wall insulated bottle and that should do the trick. If you want an extra layer of insulation, you can always add on an insulation sleeve too.
- Q: Can plastic tubes be used for wire insulation?
- Yes, plastic tubes can be used for wire insulation.
Send your message to us
Plastic Tubes - China PP-R Pipe and Fittings for Industrial Applications
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
