Q:Melamine density board how hand affixed edge strip?

It's OK to use ordinary glue. It's nothing special. Decorative E station through the website of building materials shopping channel, there are many information about the plate, you can go and see.

Q:Where is the construction of the unsupported end plate in the 11G101-1P95 page?

The question is worth exploring

Q:How do you close the wallpaper?

The reason is that there is moisture in the air, the wallpaper will become warped when the time is long, and the building materials market has layering to solve the problem.If you want to say what a letter can be, the box can also, of course the best nail glue and nail, usually with a nail box, before in the frame with steel row nail plate and nail box using the nail, the nail is fine, is not obvious, the best way is to with the wood board nailed on the brace, and then paint on the panel, you can paint or free.

Q:No cutting fault of edge sealing machine

The rear stroke switch is out of order

Q:Teach you, the cabinet backplane thickness is generally 3mm or 5mm, please ask the backplane is also edge it? Prior to the introduction, each board has to edge, but this board is so thin, businesses will also seal the four sides? Or is it just a cover?

When you say the use of 3MM or 5MM backplane, the body of the bracket is equipped with an installation slot, the back is inserted into the slot, without banding, there is no need.

Q:The difference with the closing edge?

With the closing edge actually Datong small guide.The edge can be understood as.Can not be understood as edge.

Q:How about the semi-automatic edging machine and the three row drill?,

The workers are very expensive, my friend asked me to buy, is a manufacturer of Qingdao, named Qingdao Haoda edge machine woodworking machinery, cutting saw and drill, I am still very good quality with

Q:My home closet is the use of paint free plate, at that time did not understand, the master fooled me to install the aluminum alloy edge banding. Ugly to death. Want to take it apart?. Please help God. Thanks again!

Edge paint free plate can be changed, you go to the edge of paint free plate sales shop together with the choice of color and width, bought the white glue or adhesive sticker on it, but the welt is a live, they don't stick.

Q:What kind of beam is an edge banding beam?

Secondary beamMany kinds can be determined according to the circumstances

Q:The more detailed the better, as long as the edge and veneer veneer detailed steps, other steps do not use.

1. edge:The manual or automatic edge banding machine edge, can also manually edge, no matter what kind of program are: edge, edge or edge glue - edgeband pressure post in edge - edge - on both sides of the extra redundant block edge trimming - dressing for automatic sealing machine, milling, and tracking trimming, scraping, polishing and other functions.The edge is the key to the edge of the plate must be straight, not push table saw blade size dislocation generated by the steps, to pressure post close, otherwise prone to edge and edge cracks, hand edge special glue best edge by hand, do not recommend the use of adhesive, heat is easy to fall off.2. veneer veneer:Plate thick sanding - selection of veneer veneer veneer cutting - seam - Sheet glue - coating adhesive on the veneer sheet surface into the hot pressing - trimming or trimmingSeveral key points of veneer veneer:The surface must be flat, and there must be no ribs, depressions, holes and so on, otherwise it is easy to bubbling and separating;Veneer cutting cut straight seam tight, otherwise prone to crack;Coating should be appropriate, even, too much glue, easy to penetrate, glue too little, easy to lack glue, bubble, separation;The temperature and time of pressing should be mastered accurately.