Low Price And High Quality Calcium Silicate Board
- Loading Port:
- Lianyungang
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 300000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
It can be applied not only in the interior use but also in the outdoor walls. It has low water absorption rate and high impact resistant ability. These advantages make it suitable for any purposes of applications.
Product Applications:
calcium silicate board can be used for interior and exterior wall, ceiling, floor, kitchen and toilet wall panels, materials of vessel and the subway projects, sewer separating boards in high-rise building, and even for furniture lining, fire linings, billboards, lockers board etc.
Product Advantages:
1)excellent fire-proof
2)excellent damp-proof
3)Durability and long service life
4)high strength
5)stable dimensions
6)good heat and sound insulation
7)non-asbestos
Main Product Features:
100% asbestos-free
Product composition: Portland cement, highly pure quartz sand, cellulose fiber
Density: 1.1-1.4 g/cm3
Water absorption: ≤30%
Moisture interference degree: 0.27mm
Moisture content: ≤10%
Swelling: ≤0.25%
Dry shrinkage rate: 0.5%
Impact resistance: ≥2.0 KJ/m2
Flexural resistance: ≥12 KJ/m2
Thermal conductivity: ≤0.2 W(M.K)
Screw-pull force: ≥75 N/mm
Frost resistance: After 25 freeze-thaw cycles without rupture and layer phenomena.
Product Specifications:
FAQ:
•Q: How to calculate product transportation cost?
A: According to the products weight or volume, according to the logistics company quotation.
•Q: Do you provide free sample? And how many days it will take?
A: Yes, we can provide free sample, of course it is better if you would like to pay the courier charge.
•Q: What's our price?
A: We provide resonable quotation.
•Q: How about our quality?
A: We provide international quality.
Images:
- Q:Hydrate calcium silicate gel under what circumstances
- Hydrated calcium silicate is hydrated by tricalcium silicate and dicalcium silicate, or an aqueous compound synthesized from a silicon-containing material and a calcium oxide-containing material.
- Q:Paper gypsum board, calcium silicate board, silicon calcium board difference
- Gypsum board is built with gypsum (that is, CaSO4) as the main raw material, mixed with the right amount of additives (adjust the rate of condensation) and fiber to do the core, with a special plate for the face, the processing of the plate. High, impatient
- Q:What is the difference between silicon calcium board and high crystal plate?
- Cost is also good. Recently we use the project with the high crystal plate ceiling, customers are also very satisfied.
- Q:Calcium silicate board outside the brush coating needs grassroots?
- Now the market in Hebei, Beijing, Fujian and other miscellaneous board quality is not stable enough, the process does not pay attention to the above questions must be out. In particular, the batch of a few putty, a putty dry to do the next one, putty thickness can not be too thick, 2-3MM can, and some workers do not understand, plus buy a cheap board after the installation of wave deformation, putty approved Die thick (cracked place with shovel shovel actually have 6-8MM thick), not cracked strange. As for the paint on the normal to do like a bottom two or two bottom side, do not worry. The most important is the grassroots must be installed and installed.
- Q:Buy the house is fine decoration, wood flooring poor quality to tile bathroom ceiling is calcium silicate board, it is necessary to replace it? Need to change the material of the ceiling?
- Bathroom environment is more complex, humidity, bacteria, air quality is poor, if it is calcium silicate board, it is easy to be affected, resulting in security risks such as rupture, beautiful drawbacks, that is, mold attached to the above.
- Q:Jinfu calcium silicate board and Matsumoto easy hair board that kind of good?
- Different types of raw materials, different processes and different production processes processed calcium silicate board used in the range are also different, such as fiber reinforced calcium silicate board using a variety of conditions under the composite wall panels and lightweight partition board, especially for Composite walls of the interior and exterior panels, public buildings and civil buildings of the partition board, as well as ceiling, ceiling. Fiber reinforced calcium silicate board moisture resistance is better, it is also suitable for humid environments, such as bathrooms, kitchens, toilets and basement. At the same time, fiber reinforced calcium silicate board is also suitable for the activities of the ground, can be used for computer room, fire and moisture requirements of the Treasury and warehouses and so on. The calcium silicate board is used for the general houses and commercial ceiling, cut off more common place.
- Q:What is the silicate? What is the price of calcium silicate and the market is much worse?
- Ette board is a factory in Guangzhou, the production of calcium silicate board, named Ette board because of its long history, good quality, so its price has always been more than other brands of calcium silicate board more expensive. Calcium and lime in the quartz powder through the high temperature and pressure of the reactor to produce terbutaline to the crystal, the formation of strength, which is the role of fiber to enhance the strength of the fiber as if the role of reinforced concrete in the same reinforcement. If this answer can make you satisfied, please add points.
- Q:What is the use of high-temperature calcium silicate board? I want to find a material can be resistant to high temperature 1500 ℃, and must be pressure,
- Chemical composition has long been changed, the intensity is certainly lost, do not say that fight against, there are problems with compression. Calcium silicate does not meet this requirement
- Q:Home improvement ceiling with a special board, scraping the cover is a good place is rural?
- Yes. Etter board is not calcium silicate board. The name of the Aite plate is a fiber-reinforced silicate plate. The board is imported from the plant fiber, not the ordinary calcium silicate board. Often the national standard is low. Etter board thickness has a lot of 6-12mm range. But for the ceiling is also due to project vary. Some room ceiling related to fire protection requirements, then they usually choose low-density series 8mm or 10mm; some just a simple office ceiling, then use the density of 6mm can be completely.
- Q:What is the difference between perforated calcium silicate wallboard and gypsum board?
- Perforated calcium silicate wallboard as a new environmentally friendly building materials, in addition to the function of the traditional gypsum board, but also has excellent fire performance and moisture resistance, the advantages of long life, in the practical use of a wide range of applications. Our unit is used in Jiangsu Sanxian Architectural Acoustics System Co., Ltd. production of perforated calcium silicate wallboard.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Low Price And High Quality Calcium Silicate Board
- Loading Port:
- Lianyungang
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 300000 m²/month
Offcanvas right
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords