Heat Resistance Custom Size 5MM Glass Safety Toughened
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pallet
- Supply Capability:
- 100000 pallet/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Heat Resistance Custom Size 5MM Tempered Glass Safety Toughened
Advantages of Heat Resistant Glass
The main advantage of Heat Resistant glass is that it helps in insulation by reducing the heat gain and heat loss. Adding multiple layers of glass with gas infill further protects the windows and building from heat loss.
Another advantage of Heat Resistant glass is that it increases the energy efficiency in buildings. The reduced heat transfer lowers the electrical power consumption required for heating or cooling of the space. This drastically cuts down the electrical bills especially in areas subjected to extreme heat or cold. The use of low-e glass and reflective coatings can further improve the efficiency of the windows by further limiting the heat transfer.
Heat Resistant glass also helps in sound insulation and improves the acoustics of the place. The inert gas present in between the two panes of glass does not allow noise to pass through and acts as a barrier between the interiors of the building and the noise that is present outside the building .
The factory mainly produces
Borosilicate 3.3 heat-resistant glass is widely used in household appliances, electronics, instrumentation, optics, aerospace and other fields.
Borosilicate 3.3 heat-resistant glass has good thermal properties, mechanical properties, optical properties and ultra-high chemical stability. The visible light transmittance is 92%, and the high light transmittance in the near-infrared and ultraviolet bands exceeds 90%. The sign of fluorescence is far lower than that of soda lime glass.
1）Water resistance (International Organization for Standardization 719): Grade A
2）Acid resistance (International Organization for Standardization 195): Grade A
3）Alkali resistance (International Organization for Standardization 695): Grade B
The thickness of the glass ranges from 2.5mm to 15mm, and the maximum size can reach 4800mm×2440mm.
Bullet-proof glass
Layered with glass,PVB and polycarbonate,the kinetic energy of the bullet is convered into heat by the glass and interlayer.The Bullet-proof glass is widely used for museum artifacts,banks bulletproof,showcase,villa doors and windows etc.
Thickness:3-19mm(can be customized)
Max Size：4800*2440mm
Product Property:Tempered,Laminated
Specification
OUR PACKING
Wooden crate, carton box, plastic film, customized, all packing can be fulfilled at QIMINGXING Glass.
professional and experienced working stuff, all packing and loading is guaranteed to be strong and seaworthy to reduce the breakage rate to as low as possible.
Package Type:
1)Inter package is paper or plastic between two sheets;
2)Seaworthy wooden crates;
3) Iron belt for consolidation for insulated glass
Company introduction
CNBM is a subsidiary of China National Building Materials Group Co., LTD., one of the World's top 500 enterprises CNBM line adopts oxygen combustion + electric boosting technology + platinum system technology with completely independent intellectual property rights. It is equipped with a melting furnace, tin bath, annealing furnace, and cold end cutting system suitable for the production of borosilicate glass. There are well-known international brands suitable for cutting and edging of borosilicate glass in Italy, and the latest tempering furnace in Finland. The company mainly produces borosilicate 3.3 heat-resistant glass and borosilicate 4.0 fire-resistant glass.
FAQ
Q:How to get a quotation?
A: we need to get specific details, such as size, color, thickness, quantity, edge,etc.
Q: Can you do the production as customized?
A: Yes, we have a professional technique team, we could produce the glass depends on your requirements.
Q: What the your glass package ? Are they safe ?
A: Wooden Crates Worthy for Ocean and Land Carriage .The crates will be very strong and every loading worker has 12years packed,
loading and fixation crates with container experience. And we send the loading pictures for you after we loading .
Q:. What is your minimum order quantity?
A:Our MOQ is one full 20 feet container.
Products of different sizes and specifications could be mixed in one container.
Q: Can you supply a free samples ?
A: yes, if you want us to provide big size sample according to your requirements, you should pay the cost of production.
- Q:Short point is to do hand copy
- The three conditions that trigger the fire are: combustible, oxidant and ignition energy coexist and interact. Explosive conditions are: explosives (containing reducing agents and oxidants) or combustibles (combustible gas, steam or dust) and air mixture and the initiation of energy at the same time, interaction. If we take measures to avoid or eliminate one of the above conditions, you can prevent the occurrence of fire or explosion, which is the basic principle of fire and explosion.
- Q:Outdoor steel ladder as a fire evacuation ladder has any requirements
- Outdoor evacuation staircase set requirements: (1) stairs and each floor of the export platform application of non-combustible materials production. The fire resistance of the platform should not be less than 1h. (2) in the stairs around 2m within the wall, in addition to evacuation door, should not open other doors and windows openings. The evacuation doors shall be of Class B fire doors and shall not be on the stairs. (3) the minimum net width of the stairs should not be less than 0.9m, the tilt angle should not be greater than 45 °, railings should not be less than the height of 1.1m.
- Q:Polyurethane fireproof material really effective?
- From the fire
- Q:Construction of the building when the need to set up a firewall, the most common way is to use solid brick, then do not have this, out of indignation when the fissure when the river with what other can replace, which is better? More
- There are a lot of fireproof materials, but the price is generally higher than ordinary bricks, if you use other fireproof materials can certainly replace, but your cost will increase, so for investors is not worthwhile.
- Q:Basement ceiling extrusion board insulation material fire rating What are the requirements? What are the requirements of fire acceptance?
- Use the extruded plate on it
- Q:Ul94v-0 refers to the fire level or a material
- 【UL94V-0】 refers to the plastic material of the fire rating (flame retardant grade). Plastic flame retardant grade from HB, V-2, V-1 to V-0 step by step increase: HB: UL94 standard in the bottom of the flame retardant grade. It is required that for samples of 3 to 13 mm thick, the burning rate is less than 40 mm per minute; samples less than 3 mm thick, the burning rate is less than 70 mm per minute; or extinguished before the 100 mm mark. V-2: After two 10-second burn tests on the sample, the flame is extinguished in 60 seconds. There can be a burning thing falling. V-1: After two 10-second burn tests on the sample, the flame is extinguished in 60 seconds. Can not have a burning thing falling. V-0: After two 10-second burn tests on the sample, the flame is extinguished in 30 seconds. Can not have a burning thing falling. Flammability UL94 grade Flammability UL94 grade is the most widely used combustible performance standard for plastic materials. It is used to evaluate the ability of the material to be extinguished after being ignited. According to the burning speed, burning time, anti-drop ability and whether the beads can burn a variety of judging methods. Each test material can be a lot of values ??depending on color or thickness. When a material of a product is selected, its UL grade shall meet the thickness requirements of the wall part of the plastic part. The UL rating should be reported along with the thickness value, reporting only UL grade without thickness is not enough.
- Q:Class C fire door with what material
- Material is the same, in the thickness or strength of the difference
- Q:Is it permissible or permitted to block the use of fireproofing in cable ducts?
- Construction electrical engineering construction quality acceptance in Article 12.2.1 Article 6 provides "laying in the shaft and different fire partitions of the bridge, according to the design requirements of the location, there are fire blocking measures." This lazy rough short Nao stubble Preserving flowers in the "design requirements of the location" is generally in the fire partition wall.
- Q:What is Class A Fire What is Class B Fireproof?
- B is a combustible material; B2 is a combustible material; B3 is a combustible material; B1 is a combustible material; B2 is a combustible material; B3 is a combustible material. This is divided by the oxygen index. For example, see the "interior decoration design fire safety norms."
- Q:What is the raw material for producing fire retardant coatings?
- The specific I can not say that it is a trade secret but can generally talk about 1. Non-intumescent concrete fire retardant coating, is made of inorganic adhesives and organic adhesives, and fire-resistant insulation materials by a reasonable modulation of the fire insulation Coating material. Its low density, good adhesion, good insulation, anti-aging, weather resistance, easy construction. Once the fire occurs on the surface of the coating will form a barrier oxygen, fire glaze layer, in the 2h range can guarantee the concrete components do not crack, do not collapse. 2. Thick steel structure fire insulation coating by the porous insulation materials, adhesives and performance moderators, non-asbestos. The protected steel structure, due to the thermal insulation coating, has a function of suppressing the combustion and preventing the fire from escaping the function of the flame, which significantly improves the fire resistance level. 3. Thin steel structure Fireproof coating is made of binder and refractory insulation material grinding, mixing, mixing made. The coating is water-based and has no pollution to the environment, but the construction and storage temperature should be & gt; 0 ° C. Spraying wipes are best to spray the best. After coating film, resistant to moisture, weather resistance, corrosion resistance, anti-aging also adjustable the corresponding color. The effect is convex and numb. According to the project requirements, but also smooth.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Heat Resistance Custom Size 5MM Glass Safety Toughened
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pallet
- Supply Capability:
- 100000 pallet/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
