HDF Laminate Flooring 8mm Export to Europe
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction:
Laminate flooring is a multi-layer synthetic flooring product, fused together with a laminationprocess. Laminate flooring ismost often four layers of materials，From topto bottom is Durable Overlay, Decorative Paper, HDF board, Balance Paper.
Durable Overlay is made by applying an AL2O3 solution over transparent paper, AL2O3 is very fineand thus it does not hide the color and design of the decorative paper.
Decorative Paperis a computer made paper which imitates natural wood, stone etc, by applying AL2O3to decorative paper, the latter becomes protected from the environment.
HDF board are made of wood fiber compressed into a high density panel (≥880kgs/m3).
Balance Paper is the thick and strong paper treated with AL2O3 on the back of laminate flooring,it gives stability to the laminate flooring boards and provide a measure ofisolation from under-floor humidity.
Wear Rating:
Durable Overlay Thickness | Applying Place | Euro Grade | EN438 | EN13329 | China National Stand |
22g／m2 | 21 Family Low Grade | AC1 | 2000 | ≥600 | 1500 |
33g／m2 | 22 Family Medium Grade | AC2 | 4000 | ≥900 | 2500 |
39g／m2 | 23 Family High Grade | AC3 | 6000 | ≥1800 | 4000 |
45g／m2 | 31 Commercial Low Grade | AC3 | 9000 | ≥2500 | 6000 |
62g／m2 | 32 Commercial Medium Grade | AC4 | 12000 | ≥4000 | 9000 |
76g／m2 | 33 Commercial High Grade | AC5 | 15000 | ≥6500 | 12000 |
Formaldehyde Emission：E1
Moisture Content：≤12%
Surface: Mirror, Middle Emboss, Fine Emboss, Crystal, Hand Scraped
Specification:
Thickness: 7.3mm,8.3mm, 12.3mm, 15.3mm
Based on order, other specification are alsoavailable.
Packing: 8-10 pieces per carton, 35-60 cartons perpallet, about 20 pallets per container.
- Q: How to choose a solid wood flooring
- 1, formaldehyde emission combined with the provisions of the state is not more than 1.5mg / L; 2, no pattern on the flaws; 3, select the satisfaction of after-sales service; OKorder high liver 薨 Philippine for ten ginger 4, quality, price, service 6, shop acceptance, and the purchase is the same; 7, who buy someone who shop, the responsibility clear; 8, the contract should be marked with the material, specifications, quantity, price, amount; Pay attention to daily maintenance.
- Q: What does the composite wood floor do?
- What does the composite wood floor do?
- Q: Strengthen the composite floor of the Americans also use it ???
- Flooring in the United States are FMCG, especially the strengthening of the floor, a few dollars in the supermarket a square, are locked deduction pole pole shot Yao Yue poem super stream, the installation is simple, of course, foreigners more expensive labor costs
- Q: Listen to cloning the floor good care, lazy preferred, Google only found a Cologne floor. Did i hear it wrong, or is it going to strengthen the composite floor? More
- Is the floor of the floor is the meaning of "copy" "copy" solid wood flooring look so early that the trail over the lie lie to pull the pull for the cloning of the floor and then the so-called Cologne floor drilled a loophole so many people mistaken Is his Cologne floor to see the original post & gt; & gt; trouble to adopt, thank you!
- Q: We have ceramic floors that are ugly and cracked on a radiant heated concrete floor, we was going to put laminate over but after reading reviews it looks like we need to take ceramic tiles out then lay the laminate or engineered flooring.. Which flooring is better for radiant heat?
- If the tiles are still well secured and just stress cracks, you can go over them with a laminate. Note... I said still well adhered. Same is true with a floating engineered wood floor. But if the tiles are loose at all, they need to come up , the thin set scraped down and the slab smooth . Then you can do a glue direct engineered wood or a floating floor with laminate or engineered. Both will radiate the heat about the same. Any questions you can e mail me through my avatar. GL
- Q: How to laminate the floor?
- It is recommended that you do ground floor treatment. Method is: playing keel leveling, and then laying a large core board, and then shop composite floor! If the use of cement leveling, raising the ground does not say, but also increase the weight of the floor, if leveling the cement layer is too thick, short time the ground dry through, the water is not completely distributed, so easy to cause composite floor expansion, drums. If the ground is relatively flat suggested that you do not make any treatment, pavement can be
- Q: Strengthen the composite floor is thin or good thick, and now the market has 8mm9mm10mm12mm, 12mm more
- 12 mm is the mainstream, the thickness of the feet feel moderate, 8MM to be hard many, and the winter when the second long jump Ken Ken the old tan Dan 10MM slightly higher temperature (professional equipment test), the most important is the extreme temperature Variation conditions (such as to warm), 12MM is not easy to deformation, and waterproof effect is good. Currently 8MM is mainly used for rental housing, shops, and other engineering purposes, 12MM is mainly used for the family. Related links: export floor tail single discount store dragon leaf floor flagship store St. elephant official flagship store Bell floor flagship store four floor flagship store flagship store flagship store
- Q: A portion of the top layer is broken and the flooring is glued down.
- My suggestion would be to fill it with an epoxy material.
- Q: How to strengthen the composite floor?
- Reinforced wood flooring accessories installation requirements: 1. The bottom mat can prevent the floor by wetlands, and between the ground and the floor from the buffer effect. When the mat is installed, the mats and mats can not overlap, and the interface is sealed with tape. 2. Geothermal ground, the first floor and large shopping malls and other ground to add 0.2 mm thick film, and every two films should be overlapped every 200 mm, and sealed with a tight strip. 3. Electric heating The ground is recommended to use anti-aging, good thermal conductivity of the material as a mat, in the full improvement of flexibility and reduce noise at the same time, electrical insulation protection must be improved. {TodayHot} 4. The quality of the skirting board must also meet the national standard requirements. Pavement process requirements: 1. Before installing the floor, doors and door sets must be set to the appropriate height to ensure the installation of the floor. 2. The floor of the pavement, requiring seams tight, no significant difference between high and low, no obvious gap. 3. Determination of floor expansion and contraction must be adjustable width of the special pad to determine. 4. Construction, as far as possible to maximize the savings of materials. 5. When installing the skirting board, the height of the hole on the wall to be consistent, shall not damage the pipeline within the wall. 6. Requirements skirting board at both ends of the seam tight, highly consistent.
Send your message to us
HDF Laminate Flooring 8mm Export to Europe
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
