Full Polished Glazed Porcelain Tile 600 YDL6BB311
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile 600 YDL6BB311 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.
Product Features
Polished Porcelain Tile, Double Loading
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Polished Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers
- Q:I keep hearing that tile showers are a real chore to keep clean. I bought some tile sealer, and grout sealer. Will this help out significantly? How often should I reapply? Any other tips I should know about while it‘s still a virgin shower before it‘s too late?
- I can say I sealed my grout with a aerosol spray grout and it worked great. Make sure you do it twice.
- Q:my boss wants to remove floor tiles and stain the cement floor underneath the tile, what is a easy way to remove the old tile
- It's according to your budget, the size of your arms and the shape your back is in. A 2 1/2 wide masons chisel and a 4 lb hammer will get it done about as fast as you can do it, if your body is up to it. If you have an air compressor you can buy an air chisel at Big Lots, Walmart, etc., for around 20 bucks and that will get the job done, along with the first answer for the real stubborn places as easy as you are going to do it. It will take at least a 2 or 3 hp compressor. Check the cubic feet per minute on both it and the chisel. I have done it using both when the compressor really wasn't large enough. When it runs low on air, grab the hammer and let the pressure build up. One last bit of info. Get you a little creeper seat or build you one that keeps your tail about 8 to 12 inches above the floor. You DO NOT WANT TO BE DOING IT ON YOUR KNEES. If you are a young buck like I used to be, when you get to be an old man like I am now, you will pay for it. Trust me, I am on disability now because of what I used to think was OK to do. Your body only has so many miles for it. Keep the speed down, if you know what I mean. Save something for the good times. And yes, mastic is glue. Good to put down but the worst to get back up.
- Q:I am planning on laying some tile today but not sure when it can be walked on. Also, can I lay some today and start again tomorrow? It is in a small bathroom.
- Tile to a border and don't leave adhesive sticking up, place a board over the tiles after 4 hours and it will stand light traffic, continue this to the end and grout up, should be ok 12 hours after grouting.
- Q:I need either of two types of tile one was a sheet of multicolor mosaic tiles the other is a creamy colour with a beige sort or swirly thing going through it
- Rose, You might get lucky and find them if you Google it. Only 3 years old, you might find them somewhere out there. Good Luck !!!
- Q:how do i do the measuring and lay out on a 10 foot by 6 foot floor when laying the tiles diagonally?
- A 10x6 room requires 60 square feet of tile to cover the floor. On a normal square to the walls pattern, I would order 10% more tile to cover waste. On a diagonal pattern, you will have more waste. I would order 15% to 20% more tile to cover waste. To set up to lay the tile, I start by picking the most obvious sight line in the room - maybe from the next room through the door and chalk a line perpendicular to the far wall along that sight line and parallel to the side wall. Then you chalk a line 45 degrees wall to wall through the center point of the center of the first line. This is your 45 degree pattern. Chalking a line wall to wall 90 degrees from the second chalk line through that same center point gives you your grid pattern to set your tile from. Ignore the first line - that was for reference only - line two and three are the lines you set your tile from. Set out tile dry with spacers to see if you like the effect. I will sometimes set out all of the whole tile possible in the room and walk around to see if it looks good. If it doesn't look right or you end up with too small pieces along the edges or in the doorways, you can move your initial start point and rechalk your lines.
- Q:I only have a couple of tiles in my shower to grout. I bought some pre-mixed tile grout from Home Depot. It says on the back NOT FOR USE IN SHOWER OR UNDERWATER. I called home depot and they said it would work if I were to seal it. As many know sealer is very expensive and I‘m only doing a couple of tiles that will be exposed to water. Do I have to seal this? I understand there exist grout with sealer already inside.....
- Im a floor installer and as i would probable have grount to match your grout ...You do not... so what i recomend you do is.. bring it back to home depot and get matching caulk.. yep you heard me.. their is sanded and non sanded caulk now a days to match you grout...thats what ya do and while your at it re caulk ya tub w/ whats left...lol
- Q:Our new kitchen tile floor was grouted last Thursday (almost a week ago). They did a poor job removing grout from the tile surface - very rough ceramic tile. I‘ve washed and scrubbed, it is cemented on. On top of that I don‘t like the grout color.Nothing has been sealed. So I got some acid wash and a grout stain from Home Depot. The stain says the tile should have been sealed prior to using it, I dont understand why that is. So I dont stain the tile? I‘m afraid if I sealed the tile it would seal the grout, so seems like a bad idea.And the acid wash... is this going to ruin the grout itself? How careful do I need to be about not getting in on the grout? Unfortunately its a large area, kitchen and dining area. 12‘ x 30‘. I‘ll be scrubbing a long time.Any suggestions to make this easier?Thanks!
- howdy break of day, i'm an affiliate from the domicile Depot in the states and that i artwork in the flooring/tile branch at my save, and that i see various circumstances like yours with my clientele. Fishlakeguy is solid approximately employing a grout remover on the tiles themselves. in case you have thick accumulations and buildups, between the main suitable grout removers to apply is sulfamic acid and a solid metallic scraper for any thick aspects. The sulfamic acid dissolves any layers of haze, smears, or only enormous aspects on your tile. The dry combination in crystal form can blend with water to in spite of power or diluted ratio you may choose to apply. Scrub it on with a solid pair of gloves along with your sponge, and don't hardship, its secure to apply on tile and elementary to apply. Use a splash muscle with the scraper for any enormous aspects of the grout and repeat the acid wash for the thick aspects. the main nevertheless, is to reseal your sparkling tile and grout later on because of the fact the remover (any remover you utilize somewhat) took off additionally the layer of sealant on the surfaces you basically wiped sparkling. that would desire to make your tile look great back, desire this helps you out aboveaveragejoe
- Q:I want to add a backsplash with a 4x4 ceramic tile. I only want to go up 1 or 2 tiles in height not the whole wall area. Edges of the tiles are not black for the unfinished ceramic. How do I make the edges look finished or black also?
- put cap over the top row of tiles. the cap tiles are usually 2 inches high by 6 inches long and they go right on top of the top row of tiles.
- Q:It has been installed on a concrete slab for about five months now, could the slab not have cured right or is the tile layed wrong?
- here's the deal about laying tile over a concrete slab. either the tiler has to essentially build a floor over the slab (slab, then firring strips, plywood subfloor, thinset, backerboard, thinset, tile), or must use what's called an 'isolation membrane' to install the tiles directly on the slab (slab, then membrane, thinset, tile). the isolation membrane is a self-levelling rubbery substance that thinset can adhere to, that allows the slab to crack underneath without the cracks propagating upwards through the thinset and cracking the tile. if the tiler did neither, it's almost a guarantee that eventually the tiles over the slab will crack. (yes, if the slab had not fully cured, that might have caused the crack underneath; however, most all slabs will eventually crack even if everything else is perfect. that's the reason for the isolation membrane.)
- Q:A rectangular area can be completely tiled with 200 square tiles. If the side length of each tile was increased by 1 cm, it would take only 128 tiles to tile the area. Find the side length of each tile.
- Let A be the area of the rectangle and l be the length of tile in cm. 200*l*l= A then, 128(l+1)*(l+1)= A So, 200*l*l= 128(l+1)*(l+1) 9l*l-32l-16=0 If you solve this equation the result will come l= 4cm so side of each tile is 4cm.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Full Polished Glazed Porcelain Tile 600 YDL6BB311
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
