EPDM Waterproof Membrane for Roof Project
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
EPDM Waterproof Membrane
1. Description of EPDM Waterproof Membrane:
CMAX EPDM waterproof membrane is of high elasticity with best performance among high polymer waterproof material it’s made of ternary ethylene-pro-pylene rubber.
We owe the world-advanced equipment of cold feeding extrusion and continuous vulcanization technology. With the best performance among high polymer waterproof materials, EPDM is of exceptional elasticity and will not split or cracked under normal building movement.
2. Specification of EPDM Waterproof Membrane:
Type | EPDM Rubber Waterproof Membrane | ||
Type | Vulcanized and Weldable | ||
Thickness | 1.2mm | 1.5mm | 2.0mm |
Weight(kg/m2) | 1.54-1.58 | 1.79-1.83 | 2.25-2.29 |
Size | 1.2m (width) * 20m (length)/roll. Weldable type could be 4m wide. | ||
Packing | 24㎡/roll, with plastic bag. (Weldable: 80㎡/roll) | ||
Usage | Roof, basement, pond, Lake, steel structure roofing, underground, tunnel, etc |
3. Technical Data Sheet of EPDM Waterproof Membrane
NO.
Item
Unit
Technical requirement
1
Tolerance on size
Thickness
%
±10
Width
%
±1
length
%
Does not allow negative
2
Fracture tensile strength (normal temperature )
Mpa
≥7.5
Fracture tensile strength(60 ℃)
Mpa
≥2.3
3
Breaking elongation,(normal temperature )
%
≥450
Breaking elongation,(-20 ℃)
%
≥200
4
Tearing resistance
KN/m
≥25
5
Impermeability
*
0.3Mpa impermeable
6
Bending at low temperature
°C
≤-40
7
Elongation and contraction volume at heating
Elongation
mm
≤2
contraction
mm
≤4
8
Hot air aging 80°CX168h
Fracture strength retention
%
≥80
Rate of elongation at break
%
≥70
9
Alkaline (saturated Ca(OH)2 solution normal
Temperature x2 168h )
Fracture strength retention
%
≥80
Rate of elongation at break
%
≥80
10
Ozone aging (40 degree by 168 hours )
Elongation 40% , 500x10-2
*
No Crack
11
Phytotron aging
Fracture strength retention
%
≥80
Rate of elongation at break
%
≥70
4. Property of EPDM Waterproof Membrane:
1) Excellent anti-aging performance, service life up to 50years;
2) High extension rate, high tensile strength, small size changes at heat treatment;
3) Good plant roots penetrability resistance and can be made waterproofing layer of planting roof;
4) Special modified molecular structure, effectively resolving the current domestic and foreign glue joint problem;
5) Good low temperature flexibility, and good performance of adapting to ambient temperature changes;
6) Convenient application, solid joint, no environment pollution;
7) Chemical corrosion resistance, can be used for special occasions;
8) Convenient maintenance, low costl
9) Convenient for dealing with details;
10) Good anti-perforated.
Application of EPDM Waterproof Membrane:
1) Roof, Basements, Tunnels
2) Industrial and civil building waterproofing
3) Geosynthetic liner for fish ponds, swimming pools, channels, irrigation system.
Especially suitable for projects with high requirement in durability, anti-corrosion and deformation
FAQ:
1. What are we supplying?
We are specialized in producing , geocell, geogrid, geomembrane, geotextile, waterproof membarne, etc.
2. How Many years experience do we have?
We have been exported to more than 15 countries in the past 13 years.
3. How long do we usually reply your request?
We always reply our customer within 8 hours.
- Q:Can geomembranes be used in floating covers for liquid storage tanks?
- Yes, geomembranes can be used in floating covers for liquid storage tanks. Geomembranes are impermeable liners that are commonly used to contain liquids and prevent leakage. In the context of floating covers for liquid storage tanks, geomembranes can provide an additional barrier to prevent liquid from escaping and protect the stored contents from external factors such as evaporation, contamination, or adverse weather conditions.
- Q:How long can glass sound insulation film be used?
- It usually can be used for around 1.2 years.
- Q:What are the limitations of geomembranes in high-pressure applications?
- One limitation of geomembranes in high-pressure applications is their susceptibility to punctures or tears. The increased pressure can create stress points on the geomembrane, making it more prone to damage. Additionally, geomembranes may have lower tensile strength and elongation properties, which could further contribute to their vulnerability under high-pressure conditions. It is essential to carefully consider the design and materials used when using geomembranes in high-pressure applications to ensure they can withstand the specific demands and avoid potential failures.
- Q:Can the electrothermal?film be used in bathroom?
- The electrothermal?film can be installed in bathrooms with no other influences. The electrothermal?film a heating material which is made of a special conductive polymer material and metal current carrier that is melted and pressed between insulating films. After power on it will generate heat. It is mostly used as heating elements.
- Q:The service life period of geomembrane
- Because the composite geomembrane has oxidation resistance, some files in some companies extend the time limit the previous Soviet Union BCH07-74 "Notice for the earth-rockfill application of polyethylene dam seepage control structure" stipulates polyethylene geomembrane can be used for buildings with limit over 50 Ollie Linz company publish papers on polypropylene composite geo-membrane geotechnique composite material character, whose conclusion is: Polypropylene 15 on-site application experience shows that the compound has high stability; fabric damage construction; laying has no change;...... Expected to exceed 100 stability diagram"
- Q:is geomembrane usually produced abroad?
- China is the largest producer of geomembrane. why you want to import Like HDPE high density polyethylene geomembrane. The new materials are made according to export standards. national standards divides into two standards.
- Q:The geomembrane is used which structure of seepage-proof system? What are the materials of the anti-seepage system?
- Cement concrete surface. Seepage-proof material of about 30cm protective layer can ensure the waterproof and seepage prevention of geomembrane.
- Q:How to install the piamater ceiling
- (1) For where need to install a soft place, to fix the PVC bracket supports (The support materials can be wood, aluminum alloy, stainless steel or other). 2 Then the PVC keel corner horse nail or nail fixed on the support, and then Darphin special in the knife to cut the film is fixed on the PVC keel bracket
- Q:What concrete acceptance criteria?
- Earthworks and backfill quality requirements 1, the substrate can not be over-excavation, exceeds the base level, there Overbreak place, design units must obtain the consent of the construction team can not be treated privately. (Graves, pits, wells and other soft soil) 2, when the rainy season, the foundation trench, pit bottom to reserve 30cm soil layer, when playing in front of a concrete pad to dig to the design elevation to prevent clear trough over elevation. 3, after the completion drill exploration should be well marked, to protect the solder hole, after design, surveying acceptance, drill holes filling sand. Each fill when filling sand about 30cm, or reinforced with a wooden tamping stick once, drill hole filling sand must be dense. 4, priority use of excavated backfill the original soil. Rainy season, the best accumulation of excavated soil cover to prevent rain water content is too high. Not contain organic impurities (roots, roots, etc.) should be sifted before use, the particle size of not more than 5 cm water to meet the requirements. 5, backfill should be layered spread out, when using breaststroke ramming machine compacted thickness of each layer of soil spread of not more than 25 cm (artificial ramming not more than 20 cm). Prohibited the filling of vehicle thick or pour directly into the soil trough. It prohibited the use of "water ram." Topical artificial ram, but also to ensure quality.
- Q:Are geomembranes resistant to hydraulic pressure?
- Yes, geomembranes are designed to be resistant to hydraulic pressure. They are composed of impermeable materials that can withstand the forces exerted by liquids, making them suitable for applications where containment and fluid control are required.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
EPDM Waterproof Membrane for Roof Project
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords