Ductile Iron wafer butterfly valves DN480

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
100 set
Supply Capability:
80000 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:



End flange:

ANSI B 16.1,EN1092,AS2129

Face to face:

ANSI B 16.10

Top flange:

ISO 5211

Normal pressure:





DI/ALB/Rubber lined Disc/1.2501/1.4529/CF8/Hastelloy Alloy/Monel




NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM(NSF)/PTFE

Suitable temperature:



Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc. 


A butterfly valve consists of body ,stem ,disc , actuator (manual actuator, worm-gear actuator , aerodynamic actuator or electric actuator) , and wafer type butterfly valve can implement the process for turning on turning off and regulating the flow by the circumrotation of stem and disc  that is droved by actuators.

1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.

 1. Small in size and light in weight, easy instillation and maintenance. It can be mounted wherever needed
2. Simple and compact construction, quick 90 degrees on-off operation
3. Minimized operating torque, energy saving
4. Flow curve teeing to straight line, excellent regulation performance
5. Long service life, standing the test of tens of thousands opening/closing operations
6. Bubbles-tight sealing with no leakage under the pressure test
7. Wide selection of materials, applicable to various mediums

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the difference between the installation and function of a butterfly valve and butterfly valve?
The principle of the valve gate valve is open and close cases, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. Gate has two sealing surface, the most commonly used mode gate valve of the two sealing surface forming wedge, wedge angle with valve parameters vary, usually 50, medium temperature is not high when 2 degrees 52. Wedge gate valve can be made into a whole, called the rigid gate; can also be made to produce micro deformation of ram, in order to improve its process of deviation, make up the sealing surface angle in the process, the gate is called the flexible gate. Valve closed, the sealing surface can only rely on medium pressure to seal, that is to rely on medium pressure to the gate sealing surface pressure to the other side of the seat to ensure the sealing surface seal, which is self sealing. Most of the valve is forced seal, that is, when the valve closes, to rely on external force to force the gate to the seat, in order to ensure the sealing surface sealing. Gate valve with the stem along with a straight line of motion, called the lift rod gate valve is also known as the bar gate valve. Usually there is a trapezoidal thread on the lifter. The rotating motion is changed into a straight line through the nut at the top of the valve and the guide groove on the valve body. That is to say, the operating torque is changed into the operating thrust. When opening the valve, when the gate lift height is equal to 1:1 times of the valve path, the passage of the fluid is completely unblocked, but at run time, this position is unable to monitor. In actual use, the top of the stem is used as a sign, i.e., the open position, as its fully open position.Temperature changes appear to consider locking phenomenon, usually open to the vertex position, and then rewind 1/2 1 circle, as a fully open valve position.
Q:Fire, the signal butterfly valve flange connection or welding?
Fire signal butterfly valve is generally used to clamp type connection more, the clip type butterfly valve body is without flange, that is to say, with two flanges on the pipe, then screw the butterfly valve. Followed by the butterfly valve itself with flanges, and then the pipe flange with screws connected, this is the flange connection. Fire welding less use, pressure is not high!
Q:Model specification for butterfly valves
Butterfly valve type to clip type:D7A1XR-16 50mm-1200mm D7A1XD-16 50mm-1200mm D7A1XN-16 50mm-1200mm D7A1FR-16 50mm-1200mm D7A1FD-16 50mm-1200mm D7A1FN-16 50mm-1200mm 偏心式 :D73F-16 50mm-300mm
Q:How do hydraulic butterfly valves work?
The valve hydraulic device is mounted on the valve drive shaft. The driving shaft of the valve is fixed with a transmission spline, and the crank (with an outer spline) is sleeved on the driving shaft. When the hydraulic system works normally, through the gear sleeve, the transmission spline is connected with the crank. Thus, the hydraulic cylinder drives the crank, and the spline on the crank passes the torque to the transmission spline by means of a gear sleeve. Because the driving spline is fixed on the driving shaft, the driving shaft rotates and drives the valve plate to start and close. Sorry, the picture doesn't come up
Q:1989 chevy silverado 2500 need to change valve seals?
First find out if that is the issue. Do a wet/dry compression on all the cylinders. That is where you do a compression test on all the cylinders and write them down. Then squirt about three pumps of oil from a oil can into each cylinder and retake the compressions. If the compressions don't change and are low, the valves are burnt and you need a valve job. If the compressions go way up after the oil seals the rings, then the piston rings are bad and the engine needs rebuilding and that may be where the oil smoke is coming from. If all the cylinders are within 20 psi and runs good, then it may be your valve guide seals are bad. You can replace them without pulling the heads. You can go to an auto parts store and buy a valve spring compressor that is used while the head is on the block. It has an air fitting that screws down into the spark plug hole and when filled with compressed air, holds the valves up while you remove the spring and replace the valve guide seal.
Q:How does the pneumatic butterfly valve control the angle of opening?
This is really not good, control seems to be pneumatic defects, can only rely on the feeling
Q:What's the difference between a butterfly valve and an eccentric butterfly valve? What is the difference in field applications?
Avoid friction and wear on the sealing surface!And, at the time of closing, and opening the opposite, there is a better sealing effect! Now generally use eccentric butterfly valve as the main. That's all I know! If there is any mistake, please forgive me!
Q:Butterfly valve flow direction is single or two-way?
Hello, soft sealing butterfly valve is generally two-way flow, large bore with flow direction is one-way flow. Hard sealed butterfly valves are the same.
Q:whats the name of that valve under the kitchen sink?
Sounds okorder.com/
Q:What are the butterfly valves models?
Sealing surface material score:(1) soft sealing butterfly valve.1) the sealing pairs are made of non-metallic soft materials, which are made of non-metallic soft materials.2) the sealing pair is made of metal hard material and is made of non-metallic soft material.(2) metal hard sealing butterfly valve. The sealing pair is made of metal hard material and is made of metal hard material.According to the form of sealing:(1) forced sealing butterfly valve.1) elastic sealing butterfly valve. The pressure of the valve seat, seat, or plate is produced when the seal is closed by the pressure from the valve.2) additional torque seal butterfly valve. The seal is produced by a torque that is applied to the valve shaft.(2) pressure sealed butterfly valve. The pressure is greater than the pressure on the seat or plate.(3) automatic sealing butterfly valve. The pressure of the seal is automatically generated by the pressure of the medium.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range