Ductile Iron flanged Butterfly valve DN100

Inquire Now

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

You Might Also Like

Size	DN40mm-DN1400mm
Design Standard	API 609
End flange	EN1092 , ANSI 125/150# , DIN2501
Face to face	EN 558-1, BS5155 , ISO 5752
Top flange	ISO 5211

Body	Ductile iron,Stainless steel,WCB
Disc	Ductile iron,CF8,CF8M,C95400,C95500
Stem	SS416,SS420,SS431,SS316
Seat	NBR, EPDM, WRAS-EPDM
Suitale medium	Sewage, Sea water, Air, Foodstuff and Oil

Q: does it come in when you go over a certain rpm or do the valves change depending on how far you depress the throtle?: The variable is the valve timing. The spark plug fires a split second before the piston reaches the top of the stroke, to give the fuel a bit of time to burn. But, the faster the piston travels in the bore, that split second gets shorter shorter. So the engine computer changes when the spark plug fires when the valves close, to maximize the power from each ignition stroke.

Q: What does "10" in the butterfly valve "D71X-10" mean?: Represents the nominal pressure, refers to the 10MPa pressure butterfly valve, Zhengzhou butterfly valve factory specializing in the manufacture.

Q: How can one - way sealed butterfly valves and two-way sealed butterfly valves be distinguished?: One way sealing butterfly valve is the front of the butterfly valve. When it closes, it must face the direction of the medium. The medium flows only in one direction, and the arrow on the valve body indicates the direction of the flow direction of the medium. Attention should be paid to the flow direction of the medium during installation. The two-way sealing butterfly valve is that the butterfly plate can face or back the direction of the medium, and the installation needs no attention to the direction of the flow of the medium, and the valve body also has no indication of the direction of the flow direction of the medium. Two way sealing butterfly valve stem force is greater than one-way butterfly valve stem. Design, the same diameter, pressure butterfly valve, two-way sealing butterfly valve stem diameter than one-way sealing butterfly valve stem diameter.

Q: I have a 1993 Oldsmobile Cutlass Supreme and I think I have the case of the blow-by. The engine had high mileage, but was rebuilt b/c it stalled while driving. 3.1L V6 gasoline engine. The fuel filter and the fuel pump are brand new. Now we have the same problem a few months later. It stalls while driving. Its been sitting a while and won't start by itself, so I pulled off the air intake hose off of the air filter to spray starting fluid into it. I noticed oil puddled in the air intake hose, so I looked for the PCV valve on the rocker cover. There is a tube going from the air-intake hose to the rocker cover. I popped out the tube from the rocker cover and there is no PCV valve. Just tube. Is that where the PCV valve is supposed to go? If not, where can I find it on the engine? And could that possibly fix the blow-by and the stalling engine? I'd appreciate any help. Thanks in advance.: pcv valve is on the valve cover closest to the firewall.it is attached to a rubber hose that runs to the intake. right below an electrical plug

Q: Gate valve and butterfly valve which is installed when there is a direction?: There is no direction when installing the valve. The butterfly valve has an eccentric butterfly valve which is in the direction of installation

Q: The difference between gate valve and butterfly valve, as well as cut-off valve, what are their applicable conditions? Advantages and disadvantages?: The gate valve is one of the simplest valves. Generally manual, most of the electric valve failure, as a manual. Butterfly valve is more, I saw the pneumatic butterfly valve, that is, with gas control closed, general and solenoid valve matching.

Q: What does butterfly valve do?: [1] butterfly valve is also known as turn over plate valve, is a simple structure of the control valve, but also can be used for low pressure pipe medium switch control.[2] butterfly valve: butterfly valve refers to the closure of parts (valve or butterfly plate) for the disk, around the valve shaft to achieve rotation and closing of a valve, the main cut off on the pipe and throttling role. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation. Butterfly valve used in furnace, coal gas, natural gas, liquefied petroleum gas, city gas, hot and cold air, chemical smelting and power generation environmental protection engineering system, conveying a variety of corrosive and non corrosive media pipeline, used to adjust and cut off the media flow. Butterfly valve categories are: handle butterfly valve, turbine butterfly valve, pneumatic butterfly valve, electric butterfly valve and so on.

Q: What is the working principle of the electric butterfly valve, and what's the difference between the butterfly valve and the butterfly valve?: What's the difference between a worm valve and a manual butterfly valve?The turbine can light and close the valve here. It is more labor-saving and reliable. It is closed and open. Manual operation is relatively difficult, but the manual action is very fast. Fast switching.

Q: How do the butterfly valves d341 and d343 differ in appearance?: D341 is a wedge type single gate structureThe D343 is a parallel single gate structure

Q: That industry uses most of the butterfly valve, and only use the butterfly valve, a large number of use of butterfly valve, seek expert advice!: I know there are automatic fire fighting systems and the oil industry.

Send your message to us

*Email

*TEL

*Quantity

*Unit