Q:I did a compression check on my 350 chevy. I have low compression of 175psi on one cylinder.The other seven cylinders range from 195psi to 205psi Could the valves be too tight on the cylinder with 175 psi compression?

unless they have been tampered with that wouldn't be it,they usually wont tighten up on their own,i would suspect maybe a valve with a slight burn place on it that's causing that to happen or a ring causing you to loose that much compression,try adding a small amount of oil in the cylinder and then do the compression test again,that will tell you if its a ring or a valve,that's a big loss of compression ,and when you see that much of drop its usually a burnt valve.good luck.

Q:The flow ratio of area and maximum flow area of the valve is? If it refers to the opening of the valve rotation angle? Butterfly linear closure refers to the butterfly valve at constant angular velocity close? When the change trend of flow is what? These valves problem bothering me for a long time,

Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis rotation, so as to achieve the opening or closing or adjustment; actuators have electric or pneumatic, and so on, through the transmission device to drive the stem, valve plate rotation;

Q:Butterfly valve D71X-1.6C, DN50, there is no difference between C and no C? What do you mean by "concrete"?

The C indicates that the material is carbon steel and does not indicate cast iron (generally omitted)

Q:What kind of butterfly valve is sd342x?

Sd342x: two-way double eccentric soft sealing butterfly valveS: two way pressureD: butterfly valve3: turbine operation4: flange connection2: double eccentricX: rubber sealProbably the shape is not so good in appearance,Double eccentric mostly elastic sealThree eccentric is multi-layer sealHope to be of help to youOpened valve Co., Ltd. on the production of butterfly valve

Q:Water supply pipe gate valve and butterfly valve which good?

2. ball valve: ball valve with a central opening of the ball as the valve heart, the rotation of the ball control valve opening and closing. The ball valve has the advantages of simple structure, light weight compared with the cut-off valve, the sealing surface has the advantages of simple structure, easy processing, good sealing performance, convenient operation, switch quickly, but can not be used to adjust the flow, suitable for high pressure (up to 320 psig) pipeline, at present, the packing material limit, can only be used for 200 DEG C, can also be used a variety of media and the viscosity of the suspension.3. butterfly valve: butterfly valve, also known as turn over plate valve, is a simple structure of the valve. As butterfly valve should not be closely matched with the pipe wall, only applicable to regulating flow, can not be used to cut off the pipeline, often used in conveying air and flue gas pipe to regulate flow. Butterfly valve is with the stem rotation of the circular butterfly plate for headstock parts, in order to achieve the opening and closing action of the valve. Butterfly valve is mainly used with shut-off valve, can also be designed to adjust or cut off and adjust the function. At present, butterfly valves are used more and more in low pressure medium and large diameter pipelines.

Q:Butterfly valve D41W-1, 41, W, 1, respectively, what does that mean?

D--- stands for butterfly valves; 4--- refers to the form of flange connections; 1--- refers to the valve stem and disc in the center of the valve line, without eccentricity; w--- refers to the valve seat material and body material is the same, usually carbon steel. The final 1--- refers to the nominal pressure of 1 kg / cm2.

Q:e.g. a patient with a prosthetic aortic valve and a patient with a prosthetic mitral valve. Also, can you get stenosis of mechanical valves or just tissue grafts?Thanks!

mechanical okorder /

Q:i was changing valve seals and two dropped i can see the head of the valve but a magnet wont pull them up i put air the spark plug hole too but no luck 1985 ford bronco II

Your going to have to pull the heads.

Q:What is the difference between turbine butterfly valve and flanged butterfly valve?

The worm gear is the driving mode and corresponds to the handle; the flange is connected and corresponds to the clamp. Flange worm valve is generally, the handle of the butterfly valve

Q:What is the principle of butterfly valve and check valve? Any difference?

Crown valve pressButterfly valve is butterfly valveThe check valve is a check valveButterfly valve is mainly switching functionThe check valve mainly stops the pipe from flowing backwardsThe two can only be said to be valvesThe others are different